[U-Boot] [PATCH 7/8] rockchip: rk3368: remove uart iomux init in SPL

[Andy Yan]

Hi Kever:

Kever Yang <kever.yang at rock-chips.com> 于2019年3月29日周五 下午10:55写道：

> The iomux should have been set in board_debug_uart_init(),
> do not set in board_init_f(), remove it.
>
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> ---
>
>  arch/arm/mach-rockchip/rk3368-board-spl.c | 13 -------------
>  1 file changed, 13 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/rk3368-board-spl.c
> b/arch/arm/mach-rockchip/rk3368-board-spl.c
> index b055ed4aee..9cb5eab8ae 100644
> --- a/arch/arm/mach-rockchip/rk3368-board-spl.c
> +++ b/arch/arm/mach-rockchip/rk3368-board-spl.c
> @@ -24,19 +24,6 @@ void board_init_f(ulong dummy)
>                 hang();
>         }
>
> -       /* Set up our preloader console */
> -       ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
>


the struct udevice* pinctrl definition should also be removed.



> -       if (ret) {
> -               pr_err("%s: pinctrl init failed: %d\n", __func__, ret);
> -               hang();
> -       }
> -
> -       ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART0);
> -       if (ret) {
> -               pr_err("%s: failed to set up console UART\n", __func__);
> -               hang();
> -       }
> -
>         preloader_console_init();
>
>         ret = uclass_get_device(UCLASS_RAM, 0, &dev);
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>