[U-Boot] [PATCH v2 00/11] SPL support for RISC-V
Rick Chen
rickchen36 at gmail.com
Thu Aug 1 03:32:14 UTC 2019
Hi Lukas
> > From: Lukas Auer [mailto:lukas.auer at aisec.fraunhofer.de]
> > Sent: Sunday, July 28, 2019 11:57 PM
> > To: u-boot at lists.denx.de
> > Cc: Atish Patra; Rick Jian-Zhi Chen(陳建志); Bin Meng; Sagar Kadam; Alistair
> > Francis; Anup Patel; Troy Benjegerdes; Lukas Auer; Abel Vesa; Alex Kiernan;
> > Alex Marginean; Alexander Graf; Andreas Dannenberg; Andrew F. Davis; Anup
> > Patel; Anup Patel; Atish Patra; Chris Packham; Eugeniu Rosca; Heiko Schocher;
> > Heinrich Schuchardt; Jagan Teki; Jean-Jacques Hiblot; Jens Wiklander; Joe
> > Hershberger; Kever Yang; Lokesh Vutla; Lukasz Majewski; Marek Vasut; Marek
> > Vasut; Marek Vasut; Markus Klotzbuecher; Michal Simek; Paul Burton; Peng
> > Fan; Philipp Tomsich; Philippe Reynes; Ryder Lee; Shawn Guo; Simon Glass;
> > Simon Goldschmidt; Stefan Roese; Stefano Babic; Tien Fong Chee; Vignesh R;
> > Weijie Gao; Ye Li
> > Subject: [PATCH v2 00/11] SPL support for RISC-V
> >
> > This series adds support for SPL to RISC-V U-Boot. Images can be booted via
> > OpenSBI (FW_DYNAMIC firmware) or by directly jumping to them. In the
> > former case, OpenSBI and U-Boot proper are bundled as a FIT image and made
> > available to U-Boot SPL. Currently, only the QEMU board enables U-Boot SPL
> > with a dedicated configuration. It uses RAM as SPL boot device.
> >
> > On many RISC-V CPUs, the device tree is provided to U-Boot by the first stage
> > bootloader. This requires changes to U-Boot SPL (patches 1,
> > 2 and 3), which modify the behavior on other boards as well.
> >
> > To test this series, OpenSBI has to be compiled first. The fw_dynamic.bin
> > binary must be copied into the U-Boot root directory.
> > Alternatively, the location of the binary can be specified with the OPENSBI
> > environment variable. U-Boot can then be build as normal using the
> > configuration qemu-riscv64_spl_defconfig for 64-bit builds or
> > qemu-riscv32_spl_defconfig for 32-bit builds. The outputs from the build
> > process are the U-Boot SPL binary (spl/u-boot-spl.bin) and the U-Boot FIT
> > image (u-boot.itb) containing U-Boot proper and OpenSBI.
> >
> > U-Boot can be run in QEMU with the following command.
> >
> > qemu-system-riscv64 -nographic -machine virt -kernel spl/u-boot-spl \
> > -device loader,file=u-boot.itb,addr=0x80200000
> >
Great job !
I also try to run the spl flow on ax25-ae350 platform.
But encounter some problems. I am still debugging.
Following is the error message:
:
U-Boot SPL 2019.07-10574-ge6ef7ec-dirty (Aug 01 2019 - 10:09:45 +0800)
Trying to boot from RAM
U-Boot 2019.07-10574-ge6ef7ec-dirty (Aug 01 2019 - 10:09:45 +0800)
DRAM: exception code: 5 , Load access fault , epc 1212654 , ra 1200ffe
### ERROR ### Please RESET the board ###
Do you have some comments ?
By the way, please rebase u-boot-riscv/master to avoid some
conflictions from Bin's patchs.
Thanks
Rick
> > Changes in v2:
> > - Rebase on master and format documentation as reStructuredText
> >
> > Lukas Auer (11):
> > fdtdec: make CONFIG_OF_PRIOR_STAGE available in SPL
> > Makefile: support building SPL FIT images without device trees
> > spl: fit: use U-Boot device tree when FIT image has no device tree
> > riscv: add run mode configuration for SPL
> > spl: support booting via RISC-V OpenSBI
> > riscv: add SPL support
> > riscv: support SPL stack and global data relocation
> > riscv: add a generic FIT generator script
> > riscv: set default FIT generator script and build target for SPL
> > builds
> > riscv: qemu: add SPL configuration
> > doc: update QEMU RISC-V documentation
> >
> > Kconfig | 4 +-
> > Makefile | 8 +-
> > arch/Kconfig | 6 ++
> > arch/riscv/Kconfig | 36 +++++++--
> > arch/riscv/cpu/ax25/Kconfig | 6 +-
> > arch/riscv/cpu/cpu.c | 6 +-
> > arch/riscv/cpu/generic/Kconfig | 5 +-
> > arch/riscv/cpu/start.S | 62 ++++++++++++++-
> > arch/riscv/cpu/u-boot-spl.lds | 82 +++++++++++++++++++
> > arch/riscv/include/asm/encoding.h | 2 +-
> > arch/riscv/include/asm/spl.h | 31 ++++++++
> > arch/riscv/lib/Makefile | 8 +-
> > arch/riscv/lib/mkimage_fit_opensbi.sh | 100
> > ++++++++++++++++++++++++
> > arch/riscv/lib/spl.c | 48 ++++++++++++
> > board/emulation/qemu-riscv/Kconfig | 10 +++
> > board/emulation/qemu-riscv/MAINTAINERS | 2 +
> > board/emulation/qemu-riscv/qemu-riscv.c | 17 ++++
> > common/image.c | 1 +
> > common/spl/Kconfig | 17 ++++
> > common/spl/Makefile | 1 +
> > common/spl/spl.c | 8 +-
> > common/spl/spl_fit.c | 37 ++++++---
> > common/spl/spl_opensbi.c | 85
> > ++++++++++++++++++++
> > configs/qemu-riscv32_spl_defconfig | 11 +++
> > configs/qemu-riscv64_spl_defconfig | 12 +++
> > doc/board/emulation/qemu-riscv.rst | 60 +++++++++++++-
> > include/configs/qemu-riscv.h | 14 ++++
> > include/fdtdec.h | 2 +-
> > include/image.h | 1 +
> > include/opensbi.h | 40 ++++++++++
> > include/spl.h | 5 ++
> > lib/fdtdec.c | 6 +-
> > 32 files changed, 691 insertions(+), 42 deletions(-) create mode 100644
> > arch/riscv/cpu/u-boot-spl.lds create mode 100644
> > arch/riscv/include/asm/spl.h create mode 100755
> > arch/riscv/lib/mkimage_fit_opensbi.sh
> > create mode 100644 arch/riscv/lib/spl.c create mode 100644
> > common/spl/spl_opensbi.c create mode 100644
> > configs/qemu-riscv32_spl_defconfig
> > create mode 100644 configs/qemu-riscv64_spl_defconfig
> > create mode 100644 include/opensbi.h
> >
> > --
> > 2.21.0
>
More information about the U-Boot
mailing list