[U-Boot] [PATCH v2 3/4] usb: mx6: add fuse check

[Peng Fan]

Add fuse check for USB. If the fuse indicates the module
will not work in the SoC, let's fail the initialization.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---

V2:
 Fix build for aarch64

 drivers/usb/host/ehci-mx6.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index e9e6ed596d..4a298849c5 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -353,6 +353,14 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 	if (index > 3)
 		return -EINVAL;
 
+	if (IS_ENABLED(CONFIG_IMX_MODULE_FUSE)) {
+		if (usb_fused((ulong)ehci)) {
+			printf("SoC fuse indicates USB at 0x%lx is unavailable.\n",
+			       (ulong)ehci);
+			return	-ENODEV;
+		}
+	}
+
 	ret = ehci_mx6_common_init(ehci, index);
 	if (ret)
 		return ret;
@@ -549,6 +557,14 @@ static int ehci_usb_probe(struct udevice *dev)
 	struct ehci_hcor *hcor;
 	int ret;
 
+	if (IS_ENABLED(CONFIG_IMX_MODULE_FUSE)) {
+		if (usb_fused((ulong)ehci)) {
+			printf("SoC fuse indicates USB at 0x%lx is unavailable.\n",
+			       (ulong)ehci);
+			return -ENODEV;
+		}
+	}
+
 	priv->ehci = ehci;
 	priv->portnr = dev->seq;
 	priv->init_type = type;
-- 
2.16.4