[U-Boot] [PATCH 2/2] dm: pinctrl: introduce PINCONF_RECURSIVE option
Patrick Delaunay
patrick.delaunay at st.com
Thu Aug 1 09:22:55 UTC 2019
In the Linux pinctrl binding, the pin configuration nodes don't need to
be direct children of the pin controller device (may be grandchildren for
example). This behavior is managed with the pinconfig u-class which
recursively bind all the sub-node of the pin controller.
But for some binding (when pin configuration is only children of pin
controller) that is not necessary. U-Boot can save memory and reduce
the number of pinconf instance when this feature is deactivated
(for arch stm32mp for example for SPL).
This patch allows to control this feature with a new option
CONFIG_PINCONF_RECURSIVE when it is possible for each individual
pin controller device.
Hi,
Found her a proposal to have a more clear output of "dm tree" command
and to reduce the memory footprint of PINCTRL_FULL for the arch stm32mp1
(bdinfo "Early malloc usage" is reduced from 2588 to 2144).
On stm32mp157c-ev1, each pin configuration have one other
several sub node "pins"
pinctrl: pin-controller at 50002000 {
...
adc12_usb_pwr_pins_a: adc12-usb-pwr-pins-0 {
pins {
pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
<STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
};
};
cec_pins_a: cec-0 {
pins {
pinmux = <STM32_PINMUX('A', 15, AF4)>;
bias-disable;
drive-open-drain;
slew-rate = <0>;
};
};
cec_pins_sleep_a: cec-sleep-0 {
pins {
pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
};
};
...
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
<STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
<STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
<STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
<STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
<STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
<STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
<STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
pins2 {
pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins3 {
pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
<STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
<STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
<STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
<STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
<STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
bias-disable;
};
};
...
before the patch all "pins" subnode are bounded but are unused.
STM32MP> dm tree
Class Index Probed Driver Name
-----------------------------------------------------------
root 0 [ + ] root_driver root_driver
sysreset 0 [ ] syscon_reboot |-- reboot
simple_bus 0 [ + ] generic_simple_bus |-- soc
serial 0 [ + ] serial_stm32 | |-- serial at 40010000
i2c 0 [ ] stm32f7-i2c | |-- i2c at 40013000
i2c_generi 0 [ ] stmfx | | `-- stmfx at 42
i2c 1 [ ] stm32f7-i2c | |-- i2c at 40015000
usb 0 [ ] dwc2-udc-otg | |-- usb-otg at 49000000
hwspinlock 0 [ + ] hwspinlock_stm32mp1 | |-- hwspinlock at 4c000000
mailbox 0 [ ] stm32_ipcc | |-- mailbox at 4c001000
misc 0 [ + ] stm32-rcc | |-- rcc at 50000000
clk 0 [ + ] stm32mp1_clk | | |-- stm32mp1_clk
reset 0 [ + ] stm32_rcc_reset | | `-- stm32_rcc_reset
syscon 0 [ + ] stmp32mp_syscon | |-- pwr at 50001000
pmic 0 [ + ] stm32mp_pwr_pmic | | `-- pwr-regulators
regulator 0 [ + ] stm32mp_pwr_regulato | | |-- reg11
regulator 1 [ + ] stm32mp_pwr_regulato | | |-- reg18
regulator 2 [ + ] stm32mp_pwr_regulato | | `-- usb33
syscon 1 [ ] syscon | |-- interrupt-controller at 5000d000
syscon 2 [ + ] stmp32mp_syscon | |-- syscon at 50020000
mtd 0 [ + ] stm32_fmc2_nand | |-- nand-controller at 58002000
spi 0 [ ] stm32_qspi | |-- spi at 58003000
spi_flash 0 [ ] spi_flash_std | | |-- mx66l51235l at 0
spi_flash 1 [ ] spi_flash_std | | `-- mx66l51235l at 1
mmc 0 [ + ] stm32_sdmmc2 | |-- sdmmc at 58005000
blk 0 [ + ] mmc_blk | | `-- sdmmc at 58005000.blk
mmc 1 [ + ] stm32_sdmmc2 | |-- sdmmc at 58007000
blk 1 [ ] mmc_blk | | `-- sdmmc at 58007000.blk
eth 0 [ + ] eth_eqos | |-- ethernet at 5800a000
usb 0 [ ] ehci_generic | |-- usbh-ehci at 5800d000
phy 0 [ ] stm32-usbphyc | |-- usbphyc at 5a006000
i2c 2 [ + ] stm32f7-i2c | |-- i2c at 5c002000
pmic 1 [ + ] stpmic1_pmic | | `-- stpmic at 33
regulator 3 [ + ] stpmic1_buck | | |-- buck1
regulator 4 [ + ] stpmic1_buck | | |-- buck2
regulator 5 [ + ] stpmic1_buck | | |-- buck3
regulator 6 [ + ] stpmic1_buck | | |-- buck4
regulator 7 [ + ] stpmic1_ldo | | |-- ldo1
regulator 8 [ + ] stpmic1_ldo | | |-- ldo2
regulator 9 [ + ] stpmic1_ldo | | |-- ldo3
regulator 10 [ + ] stpmic1_ldo | | |-- ldo4
regulator 11 [ + ] stpmic1_ldo | | |-- ldo5
regulator 12 [ + ] stpmic1_ldo | | |-- ldo6
regulator 13 [ + ] stpmic1_vref_ddr | | |-- vref_ddr
regulator 14 [ + ] stpmic1_boost | | |-- boost
regulator 15 [ + ] stpmic1_pwr_sw | | |-- pwr_sw1
regulator 16 [ + ] stpmic1_pwr_sw | | |-- pwr_sw2
sysreset 1 [ ] stpmic1-sysreset | | `-- stpmic1-sysreset
rtc 0 [ ] rtc-stm32 | |-- rtc at 5c004000
misc 1 [ + ] stm32mp_bsec | |-- nvmem at 5c005000
pinctrl 0 [ + ] pinctrl_stm32 | |-- pin-controller at 50002000
gpio 0 [ + ] gpio_stm32 | | |-- gpio at 50002000
gpio 1 [ + ] gpio_stm32 | | |-- gpio at 50003000
gpio 2 [ + ] gpio_stm32 | | |-- gpio at 50004000
gpio 3 [ + ] gpio_stm32 | | |-- gpio at 50005000
gpio 4 [ + ] gpio_stm32 | | |-- gpio at 50006000
gpio 5 [ + ] gpio_stm32 | | |-- gpio at 50007000
gpio 6 [ + ] gpio_stm32 | | |-- gpio at 50008000
gpio 7 [ + ] gpio_stm32 | | |-- gpio at 50009000
gpio 8 [ ] gpio_stm32 | | |-- gpio at 5000a000
gpio 9 [ ] gpio_stm32 | | |-- gpio at 5000b000
gpio 10 [ ] gpio_stm32 | | |-- gpio at 5000c000
pinconfig 0 [ ] pinconfig | | |-- adc12-usb-pwr-pins-0
pinconfig 1 [ ] pinconfig | | | `-- pins
pinconfig 2 [ ] pinconfig | | |-- cec-0
pinconfig 3 [ ] pinconfig | | | `-- pins
pinconfig 4 [ ] pinconfig | | |-- cec-sleep-0
pinconfig 5 [ ] pinconfig | | | `-- pins
pinconfig 6 [ ] pinconfig | | |-- cec-1
pinconfig 7 [ ] pinconfig | | | `-- pins
pinconfig 8 [ ] pinconfig | | |-- cec-sleep-1
pinconfig 9 [ ] pinconfig | | | `-- pins
pinconfig 10 [ + ] pinconfig | | |-- rgmii-0
pinconfig 11 [ ] pinconfig | | | |-- pins1
pinconfig 12 [ ] pinconfig | | | |-- pins2
pinconfig 13 [ ] pinconfig | | | `-- pins3
pinconfig 14 [ ] pinconfig | | |-- rgmii-sleep-0
pinconfig 15 [ ] pinconfig | | | `-- pins1
pinconfig 16 [ + ] pinconfig | | |-- fmc-0
pinconfig 17 [ ] pinconfig | | | |-- pins1
pinconfig 18 [ ] pinconfig | | | `-- pins2
pinconfig 19 [ ] pinconfig | | |-- fmc-sleep-0
pinconfig 20 [ ] pinconfig | | | `-- pins
pinconfig 21 [ ] pinconfig | | |-- i2c1-0
pinconfig 22 [ ] pinconfig | | | `-- pins
pinconfig 23 [ ] pinconfig | | |-- i2c1-1
pinconfig 24 [ ] pinconfig | | | `-- pins
pinconfig 25 [ ] pinconfig | | |-- i2c1-2
pinconfig 26 [ ] pinconfig | | | `-- pins
pinconfig 27 [ ] pinconfig | | |-- i2c2-0
pinconfig 28 [ ] pinconfig | | | `-- pins
pinconfig 29 [ ] pinconfig | | |-- i2c2-1
pinconfig 30 [ ] pinconfig | | | `-- pins
pinconfig 31 [ ] pinconfig | | |-- i2c2-2
pinconfig 32 [ ] pinconfig | | | `-- pins
pinconfig 33 [ ] pinconfig | | |-- i2c5-0
pinconfig 34 [ ] pinconfig | | | `-- pins
pinconfig 35 [ ] pinconfig | | |-- i2c5-1
pinconfig 36 [ ] pinconfig | | | `-- pins
pinconfig 37 [ ] pinconfig | | |-- ltdc-a-0
pinconfig 38 [ ] pinconfig | | | `-- pins
pinconfig 39 [ ] pinconfig | | |-- ltdc-a-1
pinconfig 40 [ ] pinconfig | | | `-- pins
pinconfig 41 [ ] pinconfig | | |-- ltdc-b-0
pinconfig 42 [ ] pinconfig | | | `-- pins
pinconfig 43 [ ] pinconfig | | |-- ltdc-b-1
pinconfig 44 [ ] pinconfig | | | `-- pins
pinconfig 45 [ ] pinconfig | | |-- m-can1-0
pinconfig 46 [ ] pinconfig | | | |-- pins1
pinconfig 47 [ ] pinconfig | | | `-- pins2
pinconfig 48 [ ] pinconfig | | |-- m_can1-sleep at 0
pinconfig 49 [ ] pinconfig | | | `-- pins
pinconfig 50 [ ] pinconfig | | |-- pwm2-0
pinconfig 51 [ ] pinconfig | | | `-- pins
pinconfig 52 [ ] pinconfig | | |-- pwm8-0
pinconfig 53 [ ] pinconfig | | | `-- pins
pinconfig 54 [ ] pinconfig | | |-- pwm12-0
pinconfig 55 [ ] pinconfig | | | `-- pins
pinconfig 56 [ ] pinconfig | | |-- qspi-clk-0
pinconfig 57 [ ] pinconfig | | | `-- pins
pinconfig 58 [ ] pinconfig | | |-- qspi-bk1-0
pinconfig 59 [ ] pinconfig | | | |-- pins1
pinconfig 60 [ ] pinconfig | | | `-- pins2
pinconfig 61 [ ] pinconfig | | |-- qspi-bk2-0
pinconfig 62 [ ] pinconfig | | | |-- pins1
pinconfig 63 [ ] pinconfig | | | `-- pins2
pinconfig 64 [ + ] pinconfig | | |-- sdmmc1-b4-0
pinconfig 65 [ ] pinconfig | | | `-- pins
pinconfig 66 [ ] pinconfig | | |-- sdmmc1-b4-od-0
pinconfig 67 [ ] pinconfig | | | |-- pins1
pinconfig 68 [ ] pinconfig | | | `-- pins2
pinconfig 69 [ ] pinconfig | | |-- sdmmc1-b4-sleep-0
pinconfig 70 [ ] pinconfig | | | `-- pins
pinconfig 71 [ + ] pinconfig | | |-- sdmmc1-dir-0
pinconfig 72 [ ] pinconfig | | | |-- pins1
pinconfig 73 [ ] pinconfig | | | `-- pins2
pinconfig 74 [ ] pinconfig | | |-- sdmmc1-dir-sleep-0
pinconfig 75 [ ] pinconfig | | | `-- pins
pinconfig 76 [ ] pinconfig | | |-- sdmmc2-b4-0
pinconfig 77 [ ] pinconfig | | | `-- pins
pinconfig 78 [ ] pinconfig | | |-- sdmmc2-d47-0
pinconfig 79 [ ] pinconfig | | | `-- pins
pinconfig 80 [ ] pinconfig | | |-- spdifrx-0
pinconfig 81 [ ] pinconfig | | | `-- pins
pinconfig 82 [ ] pinconfig | | |-- spdifrx-1
pinconfig 83 [ ] pinconfig | | | `-- pins
pinconfig 84 [ ] pinconfig | | |-- spi2-0
pinconfig 85 [ ] pinconfig | | | |-- pins1
pinconfig 86 [ ] pinconfig | | | `-- pins2
pinconfig 87 [ ] pinconfig | | |-- stusb1600-0
pinconfig 88 [ ] pinconfig | | | `-- pins
pinconfig 89 [ + ] pinconfig | | |-- uart4-0
pinconfig 90 [ ] pinconfig | | | |-- pins1
pinconfig 91 [ ] pinconfig | | | `-- pins2
pinconfig 92 [ ] pinconfig | | |-- uart4-1
pinconfig 93 [ ] pinconfig | | | |-- pins1
pinconfig 94 [ ] pinconfig | | | `-- pins2
pinconfig 95 [ ] pinconfig | | |-- uart7-0
pinconfig 96 [ ] pinconfig | | | |-- pins1
pinconfig 97 [ ] pinconfig | | | `-- pins2
pinconfig 98 [ ] pinconfig | | `-- usbotg_hs-0
pinconfig 99 [ ] pinconfig | | `-- pins
pinctrl 1 [ + ] pinctrl_stm32 | |-- pin-controller-z at 54004000
gpio 11 [ + ] gpio_stm32 | | |-- gpio at 54004000
pinconfig 100 [ + ] pinconfig | | |-- i2c4-0
pinconfig 101 [ ] pinconfig | | | `-- pins
pinconfig 102 [ ] pinconfig | | |-- i2c4-1
pinconfig 103 [ ] pinconfig | | | `-- pins
pinconfig 104 [ ] pinconfig | | `-- spi1-0
pinconfig 105 [ ] pinconfig | | |-- pins1
pinconfig 106 [ ] pinconfig | | `-- pins2
ram 0 [ ] stm32mp1_ddr | `-- ddr at 5A003000
regulator 17 [ + ] gpio regulator |-- regulator-sd_switch
led 0 [ + ] gpio_led |-- led
led 1 [ + ] gpio_led | |-- red
led 2 [ + ] gpio_led | |-- green
led 3 [ + ] gpio_led | |-- orange
led 4 [ ] gpio_led | `-- blue
clk 1 [ + ] fixed_rate_clock |-- clk-hse
clk 2 [ + ] fixed_rate_clock |-- clk-hsi
clk 3 [ + ] fixed_rate_clock |-- clk-lse
clk 4 [ + ] fixed_rate_clock |-- clk-lsi
clk 5 [ + ] fixed_rate_clock `-- clk-csi
With the patch only the needed "pinconfig" instances are kept:
STM32MP> dm tree
Class Index Probed Driver Name
-----------------------------------------------------------
root 0 [ + ] root_driver root_driver
sysreset 0 [ ] syscon_reboot |-- reboot
simple_bus 0 [ + ] generic_simple_bus |-- soc
serial 0 [ + ] serial_stm32 | |-- serial at 40010000
i2c 0 [ ] stm32f7-i2c | |-- i2c at 40013000
i2c_generi 0 [ ] stmfx | | `-- stmfx at 42
i2c 1 [ ] stm32f7-i2c | |-- i2c at 40015000
usb 0 [ ] dwc2-udc-otg | |-- usb-otg at 49000000
hwspinlock 0 [ + ] hwspinlock_stm32mp1 | |-- hwspinlock at 4c000000
mailbox 0 [ ] stm32_ipcc | |-- mailbox at 4c001000
misc 0 [ + ] stm32-rcc | |-- rcc at 50000000
clk 0 [ + ] stm32mp1_clk | | |-- stm32mp1_clk
reset 0 [ + ] stm32_rcc_reset | | `-- stm32_rcc_reset
syscon 0 [ + ] stmp32mp_syscon | |-- pwr at 50001000
pmic 0 [ + ] stm32mp_pwr_pmic | | `-- pwr-regulators
regulator 0 [ + ] stm32mp_pwr_regulato | | |-- reg11
regulator 1 [ + ] stm32mp_pwr_regulato | | |-- reg18
regulator 2 [ + ] stm32mp_pwr_regulato | | `-- usb33
syscon 1 [ ] syscon | |-- interrupt-controller at 5000d000
syscon 2 [ + ] stmp32mp_syscon | |-- syscon at 50020000
mtd 0 [ + ] stm32_fmc2_nand | |-- nand-controller at 58002000
spi 0 [ ] stm32_qspi | |-- spi at 58003000
spi_flash 0 [ ] spi_flash_std | | |-- mx66l51235l at 0
spi_flash 1 [ ] spi_flash_std | | `-- mx66l51235l at 1
mmc 0 [ + ] stm32_sdmmc2 | |-- sdmmc at 58005000
blk 0 [ + ] mmc_blk | | `-- sdmmc at 58005000.blk
mmc 1 [ + ] stm32_sdmmc2 | |-- sdmmc at 58007000
blk 1 [ ] mmc_blk | | `-- sdmmc at 58007000.blk
eth 0 [ + ] eth_eqos | |-- ethernet at 5800a000
usb 0 [ ] ehci_generic | |-- usbh-ehci at 5800d000
phy 0 [ ] stm32-usbphyc | |-- usbphyc at 5a006000
i2c 2 [ + ] stm32f7-i2c | |-- i2c at 5c002000
pmic 1 [ + ] stpmic1_pmic | | `-- stpmic at 33
regulator 3 [ + ] stpmic1_buck | | |-- buck1
regulator 4 [ + ] stpmic1_buck | | |-- buck2
regulator 5 [ + ] stpmic1_buck | | |-- buck3
regulator 6 [ + ] stpmic1_buck | | |-- buck4
regulator 7 [ + ] stpmic1_ldo | | |-- ldo1
regulator 8 [ + ] stpmic1_ldo | | |-- ldo2
regulator 9 [ + ] stpmic1_ldo | | |-- ldo3
regulator 10 [ + ] stpmic1_ldo | | |-- ldo4
regulator 11 [ + ] stpmic1_ldo | | |-- ldo5
regulator 12 [ + ] stpmic1_ldo | | |-- ldo6
regulator 13 [ + ] stpmic1_vref_ddr | | |-- vref_ddr
regulator 14 [ + ] stpmic1_boost | | |-- boost
regulator 15 [ + ] stpmic1_pwr_sw | | |-- pwr_sw1
regulator 16 [ + ] stpmic1_pwr_sw | | |-- pwr_sw2
sysreset 1 [ ] stpmic1-sysreset | | `-- stpmic1-sysreset
rtc 0 [ ] rtc-stm32 | |-- rtc at 5c004000
misc 1 [ + ] stm32mp_bsec | |-- nvmem at 5c005000
pinctrl 0 [ + ] pinctrl_stm32 | |-- pin-controller at 50002000
gpio 0 [ + ] gpio_stm32 | | |-- gpio at 50002000
gpio 1 [ + ] gpio_stm32 | | |-- gpio at 50003000
gpio 2 [ + ] gpio_stm32 | | |-- gpio at 50004000
gpio 3 [ + ] gpio_stm32 | | |-- gpio at 50005000
gpio 4 [ + ] gpio_stm32 | | |-- gpio at 50006000
gpio 5 [ + ] gpio_stm32 | | |-- gpio at 50007000
gpio 6 [ + ] gpio_stm32 | | |-- gpio at 50008000
gpio 7 [ + ] gpio_stm32 | | |-- gpio at 50009000
gpio 8 [ ] gpio_stm32 | | |-- gpio at 5000a000
gpio 9 [ ] gpio_stm32 | | |-- gpio at 5000b000
gpio 10 [ ] gpio_stm32 | | |-- gpio at 5000c000
pinconfig 0 [ ] pinconfig | | |-- adc12-usb-pwr-pins-0
pinconfig 1 [ ] pinconfig | | |-- cec-0
pinconfig 2 [ ] pinconfig | | |-- cec-sleep-0
pinconfig 3 [ ] pinconfig | | |-- cec-1
pinconfig 4 [ ] pinconfig | | |-- cec-sleep-1
pinconfig 5 [ + ] pinconfig | | |-- rgmii-0
pinconfig 6 [ ] pinconfig | | |-- rgmii-sleep-0
pinconfig 7 [ + ] pinconfig | | |-- fmc-0
pinconfig 8 [ ] pinconfig | | |-- fmc-sleep-0
pinconfig 9 [ ] pinconfig | | |-- i2c1-0
pinconfig 10 [ ] pinconfig | | |-- i2c1-1
pinconfig 11 [ ] pinconfig | | |-- i2c1-2
pinconfig 12 [ ] pinconfig | | |-- i2c2-0
pinconfig 13 [ ] pinconfig | | |-- i2c2-1
pinconfig 14 [ ] pinconfig | | |-- i2c2-2
pinconfig 15 [ ] pinconfig | | |-- i2c5-0
pinconfig 16 [ ] pinconfig | | |-- i2c5-1
pinconfig 17 [ ] pinconfig | | |-- ltdc-a-0
pinconfig 18 [ ] pinconfig | | |-- ltdc-a-1
pinconfig 19 [ ] pinconfig | | |-- ltdc-b-0
pinconfig 20 [ ] pinconfig | | |-- ltdc-b-1
pinconfig 21 [ ] pinconfig | | |-- m-can1-0
pinconfig 22 [ ] pinconfig | | |-- m_can1-sleep at 0
pinconfig 23 [ ] pinconfig | | |-- pwm2-0
pinconfig 24 [ ] pinconfig | | |-- pwm8-0
pinconfig 25 [ ] pinconfig | | |-- pwm12-0
pinconfig 26 [ ] pinconfig | | |-- qspi-clk-0
pinconfig 27 [ ] pinconfig | | |-- qspi-bk1-0
pinconfig 28 [ ] pinconfig | | |-- qspi-bk2-0
pinconfig 29 [ + ] pinconfig | | |-- sdmmc1-b4-0
pinconfig 30 [ ] pinconfig | | |-- sdmmc1-b4-od-0
pinconfig 31 [ ] pinconfig | | |-- sdmmc1-b4-sleep-0
pinconfig 32 [ + ] pinconfig | | |-- sdmmc1-dir-0
pinconfig 33 [ ] pinconfig | | |-- sdmmc1-dir-sleep-0
pinconfig 34 [ ] pinconfig | | |-- sdmmc2-b4-0
pinconfig 35 [ ] pinconfig | | |-- sdmmc2-d47-0
pinconfig 36 [ ] pinconfig | | |-- spdifrx-0
pinconfig 37 [ ] pinconfig | | |-- spdifrx-1
pinconfig 38 [ ] pinconfig | | |-- spi2-0
pinconfig 39 [ ] pinconfig | | |-- stusb1600-0
pinconfig 40 [ + ] pinconfig | | |-- uart4-0
pinconfig 41 [ ] pinconfig | | |-- uart4-1
pinconfig 42 [ ] pinconfig | | |-- uart7-0
pinconfig 43 [ ] pinconfig | | `-- usbotg_hs-0
pinctrl 1 [ + ] pinctrl_stm32 | |-- pin-controller-z at 54004000
gpio 11 [ + ] gpio_stm32 | | |-- gpio at 54004000
pinconfig 44 [ + ] pinconfig | | |-- i2c4-0
pinconfig 45 [ ] pinconfig | | |-- i2c4-1
pinconfig 46 [ ] pinconfig | | `-- spi1-0
ram 0 [ ] stm32mp1_ddr | `-- ddr at 5A003000
regulator 17 [ + ] gpio regulator |-- regulator-sd_switch
led 0 [ + ] gpio_led |-- led
led 1 [ + ] gpio_led | |-- red
led 2 [ + ] gpio_led | |-- green
led 3 [ + ] gpio_led | |-- orange
led 4 [ ] gpio_led | `-- blue
clk 1 [ + ] fixed_rate_clock |-- clk-hse
clk 2 [ + ] fixed_rate_clock |-- clk-hsi
clk 3 [ + ] fixed_rate_clock |-- clk-lse
clk 4 [ + ] fixed_rate_clock |-- clk-lsi
clk 5 [ + ] fixed_rate_clock `-- clk-csi
END
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
drivers/pinctrl/Kconfig | 25 +++++++++++++++++++++++++
drivers/pinctrl/pinctrl-uclass.c | 2 ++
2 files changed, 27 insertions(+)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index a0ac167..deee924 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -59,6 +59,22 @@ config PINCONF
This option enables pin configuration through the generic pinctrl
framework.
+config PINCONF_RECURSIVE
+ bool "Support recursive binding for pin configuration nodes"
+ depends on PINCTRL_FULL
+ default n if ARCH_STM32MP
+ default y
+ help
+ In the Linux pinctrl binding, the pin configuration nodes need not be
+ direct children of the pin controller device (may be grandchildren for
+ example). It is define is each individual pin controller device.
+ Say Y here if you want to keep this behavior with the pinconfig
+ u-class: all sub are recursivelly bounded.
+ If the option is disabled, this behavior is deactivated and only
+ the direct children of pin controller will be assumed as pin
+ configuration; you can save memory footprint when this feature is
+ no needed.
+
config SPL_PINCTRL
bool "Support pin controllers in SPL"
depends on SPL && SPL_DM
@@ -104,6 +120,15 @@ config SPL_PINCONF
This option is an SPL-variant of the PINCONF option.
See the help of PINCONF for details.
+config SPL_PINCONF_RECURSIVE
+ bool "Support recursive binding for pin configuration nodes in SPL"
+ depends on SPL_PINCTRL_FULL
+ default n if ARCH_STM32MP
+ default y
+ help
+ This option is an SPL-variant of the PINCONF_RECURSIVE option.
+ See the help of PINCONF_RECURSIVE for details.
+
if PINCTRL || SPL_PINCTRL
config PINCTRL_AR933X
diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c
index 5b1cd29..bf799a7 100644
--- a/drivers/pinctrl/pinctrl-uclass.c
+++ b/drivers/pinctrl/pinctrl-uclass.c
@@ -151,7 +151,9 @@ static int pinconfig_post_bind(struct udevice *dev)
UCLASS_DRIVER(pinconfig) = {
.id = UCLASS_PINCONFIG,
+#if CONFIG_IS_ENABLED(PINCONFIG_RECURSIVE)
.post_bind = pinconfig_post_bind,
+#endif
.name = "pinconfig",
};
--
2.7.4
More information about the U-Boot
mailing list