[U-Boot] [PATCH] mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected

[Peng Fan]

> Subject: [PATCH] mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT
> is selected
> 
> Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected as is being
> done for the U-boot case.
> 
> Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
> ---
>  drivers/mmc/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index
> 4cdae41b59..66097ce0e7 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -156,6 +156,7 @@ config MMC_HS400_SUPPORT
> 
>  config SPL_MMC_HS400_SUPPORT
>  	bool "enable HS400 support in SPL"
> +	select SPL_MMC_HS200_SUPPORT
>  	help
>  	  The HS400 mode is support by some eMMC. The bus frequency is up
> to
>  	  200MHz. This mode requires tuning the IO.

Reviewed-by: Peng Fan <peng.fan at nxp.com>

> --
> 2.19.2