[U-Boot] [PATCH 2/2] imx: mx6ul_14x14_evk: convert to DM_VIDEO

Jagan Teki jagan at amarulasolutions.com
Fri Aug 2 06:39:03 UTC 2019


On Fri, Aug 2, 2019 at 12:05 PM Peng Fan <peng.fan at nxp.com> wrote:
>
> HI,
>
> > Subject: Re: [PATCH 2/2] imx: mx6ul_14x14_evk: convert to DM_VIDEO
> >
> > Hi Peng,
> >
> > On Thu, Aug 1, 2019 at 3:02 AM Peng Fan <peng.fan at nxp.com> wrote:
> >
> > > +       display0: display at 0 {
> > > +               bits-per-pixel = <16>;
> > > +               bus-width = <24>;
> > > +
> > > +               display-timings {
> > > +                       native-mode = <&timing0>;
> > > +
> > > +                       timing0: timing0 {
> > > +                               clock-frequency = <9200000>;
> > > +                               hactive = <480>;
> > > +                               vactive = <272>;
> > > +                               hfront-porch = <8>;
> > > +                               hback-porch = <4>;
> > > +                               hsync-len = <41>;
> > > +                               vback-porch = <2>;
> > > +                               vfront-porch = <4>;
> > > +                               vsync-len = <10>;
> > > +                               hsync-active = <0>;
> > > +                               vsync-active = <0>;
> > > +                               de-active = <1>;
> > > +                               pixelclk-active = <0>;
> >
> > So here we have the LCD timings in the device tree, which differs from the the
> > devicetree in mainline.
> >
> > This is based on the old mxsfb fbdev driver, which has been removed in 5.3-rc.
> >
> > In mainline we pass the innolux,at043tn24 LCD compatible.
> >
> > Shouldn't U-Boot be able to handle the same dt-bindings as in the kernel?
>
> I added this node in x-u-boot.dtsi, not in common dts. If drop this display-timings,
> we need add a similar structure inside code just as kernel did.
> And need to restructure mxsfb driver.
>
> For simple, we could leave this in u-boot.dtsi.

How about adding panel timings in panel-simple we have similar in
u-boot and sync equivalent dts changes from Linux?


More information about the U-Boot mailing list