[U-Boot] [PATCH] mmc: zynq_sdhci: fix uninitialized pointer deref on probe

Michal Simek michal.simek at xilinx.com
Fri Aug 2 09:23:42 UTC 2019


On 02. 08. 19 11:23, Peng Fan wrote:
> 
>> Subject: Re: [PATCH] mmc: zynq_sdhci: fix uninitialized pointer deref on probe
>>
>> On 01. 08. 19 17:00, Matwey V. Kornilov wrote:
>>> Since commit 3d296365e4e8 ("mmc: sdhci: Add support for
>>> sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc
>>> field. Move the mmc field initialization before sdhci_setup_cfg() call
>>> to avoid crash on mmc pointer dereference.
>>>
>>> [this patch is based on commit 41a9fab8dac8 ("mmc: mv_sdhci: fix
>>> uninitialized pointer deref on probe") by Baruch Siach]
>>>
>>> Fixes: 3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask")
>>> Cc: Faiz Abbas <faiz_abbas at ti.com>
>>> Cc: Baruch Siach <baruch at tkos.co.il>
>>> Signed-off-by: Matwey V. Kornilov <matwey.kornilov at gmail.com>
>>> ---
>>>  drivers/mmc/zynq_sdhci.c | 7 ++++---
>>>  1 file changed, 4 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index
>>> c525084250..3225a7ac93 100644
>>> --- a/drivers/mmc/zynq_sdhci.c
>>> +++ b/drivers/mmc/zynq_sdhci.c
>>> @@ -242,13 +242,14 @@ static int arasan_sdhci_probe(struct udevice
>>> *dev)
>>>
>>>  	host->max_clk = clock;
>>>
>>> +	host->mmc = &plat->mmc;
>>> +	host->mmc->dev = dev;
>>> +	host->mmc->priv = host;
>>> +
>>>  	ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
>>>  			      CONFIG_ZYNQ_SDHCI_MIN_FREQ);
>>> -	host->mmc = &plat->mmc;
>>>  	if (ret)
>>>  		return ret;
>>> -	host->mmc->priv = host;
>>> -	host->mmc->dev = dev;
>>>  	upriv->mmc = host->mmc;
>>>
>>>  	return sdhci_probe(dev);
>>>
>>
>> Would be good to mentioned that this was tested on Z-turn board.
>>
>> Anyway I have tested it on zcu102 and issue is not visible there but it is visible
>> on zc706. That's why I expect this is issue only for Zynq device.
>>
>> Anyway
>> Tested-by: Michal Simek <michal.simek at xilinx.com> (on zcu102/zc706)
>>
>> Peng: Feel free to take it via your tree or I will take it.
> 
> I'll take it.

thx.
M


More information about the U-Boot mailing list