[U-Boot] [PATCH 2/5] arm: dts: Add devicetree for Hikey960 board
Manivannan Sadhasivam
manivannan.sadhasivam at linaro.org
Fri Aug 2 15:10:08 UTC 2019
This commit adds devicetree for Hikey960 board. Most of the contents are
copied from Linux kernel with some modifications for u-boot. To be
more precise, SD card's speed related properties are removed due to a
bug in u-boot clock implementation. Hence forcing the SD controller to
work in standard speed.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/hi3660-hikey960-u-boot.dtsi | 10 +
arch/arm/dts/hi3660-hikey960.dts | 607 +++++++++++++++++++++++
3 files changed, 618 insertions(+)
create mode 100644 arch/arm/dts/hi3660-hikey960-u-boot.dtsi
create mode 100644 arch/arm/dts/hi3660-hikey960.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f5535078c7..8dfc1f033c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -15,6 +15,7 @@ dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
exynos4412-odroid.dtb
dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb
+dtb-$(CONFIG_TARGET_HIKEY960) += hi3660-hikey960.dtb
dtb-$(CONFIG_TARGET_POPLAR) += hi3798cv200-poplar.dtb
diff --git a/arch/arm/dts/hi3660-hikey960-u-boot.dtsi b/arch/arm/dts/hi3660-hikey960-u-boot.dtsi
new file mode 100644
index 0000000000..648c77f8c5
--- /dev/null
+++ b/arch/arm/dts/hi3660-hikey960-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * Copyright (c) 2019 Linaro Ltd.
+ */
+
+&dwmmc1 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/hi3660-hikey960.dts b/arch/arm/dts/hi3660-hikey960.dts
new file mode 100644
index 0000000000..9fbfb422c8
--- /dev/null
+++ b/arch/arm/dts/hi3660-hikey960.dts
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey960 Development Board
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi3660.dtsi"
+#include "hikey960-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "HiKey960";
+ compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
+
+ aliases {
+ mshc1 = &dwmmc1;
+ mshc2 = &dwmmc2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ };
+
+ chosen {
+ stdout-path = "serial6:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ /* rewrite this at bootloader */
+ reg = <0x0 0x0 0x0 0x0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops at 32000000 {
+ compatible = "ramoops";
+ reg = <0x0 0x32000000 0x0 0x00100000>;
+ record-size = <0x00020000>;
+ console-size = <0x00020000>;
+ ftrace-size = <0x00020000>;
+ };
+ };
+
+ reboot-mode-syscon at 32100000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x32100000 0x0 0x00001000>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x0>;
+
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
+
+ power {
+ wakeup-source;
+ gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user_led1 {
+ label = "green:user1";
+ /* gpio_150_user_led1 */
+ gpios = <&gpio18 6 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user_led2 {
+ label = "green:user2";
+ /* gpio_151_user_led2 */
+ gpios = <&gpio18 7 0>;
+ linux,default-trigger = "none";
+ };
+
+ user_led3 {
+ label = "green:user3";
+ /* gpio_189_user_led3 */
+ gpios = <&gpio23 5 0>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user_led4 {
+ label = "green:user4";
+ /* gpio_190_user_led4 */
+ gpios = <&gpio23 6 0>;
+ panic-indicator;
+ linux,default-trigger = "none";
+ };
+
+ wlan_active_led {
+ label = "yellow:wlan";
+ /* gpio_205_wifi_active */
+ gpios = <&gpio25 5 0>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt_active_led {
+ label = "blue:bt";
+ gpios = <&gpio25 7 0>;
+ /* gpio_207_user_led1 */
+ linux,default-trigger = "hci0-power";
+ default-state = "off";
+ };
+ };
+
+ pmic: pmic at fff34000 {
+ compatible = "hisilicon,hi6421v530-pmic";
+ reg = <0x0 0xfff34000 0x0 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ ldo3: LDO3 { /* HDMI */
+ regulator-name = "VOUT3_1V85";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo9: LDO9 { /* SDCARD I/O */
+ regulator-name = "VOUT9_1V8_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ ldo11: LDO11 { /* Low Speed Connector */
+ regulator-name = "VOUT11_1V8_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ ldo15: LDO15 { /* UFS VCC */
+ regulator-name = "VOUT15_3V0";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo16: LDO16 { /* SD VDD */
+ regulator-name = "VOUT16_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+ };
+ };
+
+ wlan_en: wlan-en-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* GPIO_051_WIFI_EN */
+ gpio = <&gpio6 3 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+};
+
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * "" = no idea, schematic doesn't say, could be
+ * unrouted (not connected to any external pin)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from "HiKey 960 Board ver A" schematics
+ * from Huawei. The 40 pin low speed expansion connector is named
+ * J2002 63453-140LF.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+ /* GPIO_000-GPIO_007 */
+ gpio-line-names =
+ "",
+ "TP901", /* TEST_MODE connected to TP901 */
+ "[PMU0_SSI]",
+ "[PMU1_SSI]",
+ "[PMU2_SSI]",
+ "[PMU0_CLKOUT]",
+ "[JTAG_TCK]",
+ "[JTAG_TMS]";
+};
+
+&gpio1 {
+ /* GPIO_008-GPIO_015 */
+ gpio-line-names =
+ "[JTAG_TRST_N]",
+ "[JTAG_TDI]",
+ "[JTAG_TDO]",
+ "NC", "NC",
+ "[I2C3_SCL]",
+ "[I2C3_SDA]",
+ "NC";
+};
+
+&gpio2 {
+ /* GPIO_016-GPIO_023 */
+ gpio-line-names =
+ "NC", "NC", "NC",
+ "GPIO-J", /* LSEC pin 32: GPIO_019 */
+ "GPIO_020_HDMI_SEL",
+ "GPIO-L", /* LSEC pin 34: GPIO_021 */
+ "GPIO_022_UFSBUCK_INT_N",
+ "GPIO-G"; /* LSEC pin 29: LCD_TE0 */
+};
+
+&gpio3 {
+ /* GPIO_024-GPIO_031 */
+ /* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */
+ gpio-line-names =
+ "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
+ "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
+ "NC",
+ "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
+ "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
+ "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
+ "[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */
+ "NC";
+};
+
+&gpio4 {
+ /* GPIO_032-GPIO_039 */
+ gpio-line-names =
+ "NC", "NC",
+ "PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */
+ "GPIO_035_PMU2_EN",
+ "GPIO_036_USB_HUB_RESET",
+ "NC", "NC", "NC";
+};
+
+&gpio5 {
+ /* GPIO_040-GPIO_047 */
+ gpio-line-names =
+ "GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */
+ "GPIO_041_HDMI_PD",
+ "TP904", /* Test point */
+ "TP905", /* Test point */
+ "NC", "NC",
+ "GPIO_046_HUB_VDD33_EN",
+ "GPIO_047_PMU1_EN";
+};
+
+&gpio6 {
+ /* GPIO_048-GPIO_055 */
+ gpio-line-names =
+ "NC", "NC", "NC",
+ "GPIO_051_WIFI_EN",
+ "GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */
+ /*
+ * These two pins should be used for SD(IO) data according to the
+ * 96boards specification but seems to be repurposed for a IRDA UART.
+ * They are however named according to the spec.
+ */
+ "[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */
+ "[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */
+ "[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */
+};
+
+&gpio7 {
+ /* GPIO_056-GPIO_063 */
+ gpio-line-names =
+ "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
+ "[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */
+ "[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */
+ "[UART0_RXD]", /* LSEC pin 7: UART3_RXD */
+ "[UART0_TXD]", /* LSEC pin 5: UART3_TXD */
+ "[SOC_BT_UART4_CTS_N]",
+ "[SOC_BT_UART4_RTS_N]",
+ "[SOC_BT_UART4_RXD]";
+};
+
+&gpio8 {
+ /* GPIO_064-GPIO_071 */
+ gpio-line-names =
+ "[SOC_BT_UART4_TXD]",
+ "NC",
+ "[PMU_HKADC_SSI]",
+ "NC",
+ "GPIO_068_SEL",
+ "NC", "NC", "NC";
+
+};
+
+&gpio9 {
+ /* GPIO_072-GPIO_079 */
+ gpio-line-names =
+ "NC", "NC", "NC",
+ "GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */
+ "NC", "NC", "NC", "NC";
+};
+
+&gpio10 {
+ /* GPIO_080-GPIO_087 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio11 {
+ /* GPIO_088-GPIO_095 */
+ gpio-line-names =
+ "NC",
+ "[PCIE_PERST_N]",
+ "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio12 {
+ /* GPIO_096-GPIO_103 */
+ gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC";
+};
+
+&gpio13 {
+ /* GPIO_104-GPIO_111 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio14 {
+ /* GPIO_112-GPIO_119 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio15 {
+ /* GPIO_120-GPIO_127 */
+ gpio-line-names =
+ "NC", "NC", "NC", "NC", "NC", "NC",
+ "GPIO_126_BT_EN",
+ "TP902"; /* GPIO_127_JTAG_SEL0 */
+};
+
+&gpio16 {
+ /* GPIO_128-GPIO_135 */
+ gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio17 {
+ /* GPIO_136-GPIO_143 */
+ gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio18 {
+ /* GPIO_144-GPIO_151 */
+ gpio-line-names =
+ "[UFS_REF_CLK]",
+ "[UFS_RST_N]",
+ "[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */
+ "[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */
+ "[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */
+ "[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */
+ "GPIO_150_USER_LED1",
+ "GPIO_151_USER_LED2";
+};
+
+&gpio19 {
+ /* GPIO_152-GPIO_159 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", "";
+};
+
+&gpio20 {
+ /* GPIO_160-GPIO_167 */
+ gpio-line-names =
+ "[SD_CLK]",
+ "[SD_CMD]",
+ "[SD_DATA0]",
+ "[SD_DATA1]",
+ "[SD_DATA2]",
+ "[SD_DATA3]",
+ "", "";
+};
+
+&gpio21 {
+ /* GPIO_168-GPIO_175 */
+ gpio-line-names =
+ "[WL_SDIO_CLK]",
+ "[WL_SDIO_CMD]",
+ "[WL_SDIO_DATA0]",
+ "[WL_SDIO_DATA1]",
+ "[WL_SDIO_DATA2]",
+ "[WL_SDIO_DATA3]",
+ "", "";
+};
+
+&gpio22 {
+ /* GPIO_176-GPIO_183 */
+ gpio-line-names =
+ "[GPIO_176_PMU_PWR_HOLD]",
+ "NA",
+ "[SYSCLK_EN]",
+ "GPIO_179_WL_WAKEUP_AP",
+ "GPIO_180_HDMI_INT",
+ "NA",
+ "GPIO-F", /* LSEC pin 28: LCD_BL_PWM */
+ "[I2C0_SCL]"; /* LSEC pin 15 */
+};
+
+&gpio23 {
+ /* GPIO_184-GPIO_191 */
+ gpio-line-names =
+ "[I2C0_SDA]", /* LSEC pin 17 */
+ "[I2C1_SCL]", /* Actual SoC I2C1 */
+ "[I2C1_SDA]", /* Actual SoC I2C1 */
+ "[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */
+ "[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */
+ "GPIO_189_USER_LED3",
+ "GPIO_190_USER_LED4",
+ "";
+};
+
+&gpio24 {
+ /* GPIO_192-GPIO_199 */
+ gpio-line-names =
+ "[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */
+ "[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */
+ "[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */
+ "[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */
+ "[GPIO_196_I2S2_DI]",
+ "[GPIO_197_I2S2_DO]",
+ "[GPIO_198_I2S2_XCLK]",
+ "[GPIO_199_I2S2_XFS]";
+};
+
+&gpio25 {
+ /* GPIO_200-GPIO_207 */
+ gpio-line-names =
+ "NC",
+ "NC",
+ "GPIO_202_VBUS_TYPEC",
+ "GPIO_203_SD_DET",
+ "GPIO_204_PMU12_IRQ_N",
+ "GPIO_205_WIFI_ACTIVE",
+ "GPIO_206_USBSW_SEL",
+ "GPIO_207_BT_ACTIVE";
+};
+
+&gpio26 {
+ /* GPIO_208-GPIO_215 */
+ gpio-line-names =
+ "GPIO-A", /* LSEC pin 23: GPIO_208 */
+ "GPIO-B", /* LSEC pin 24: GPIO_209 */
+ "GPIO-C", /* LSEC pin 25: GPIO_210 */
+ "GPIO-D", /* LSEC pin 26: GPIO_211 */
+ "GPIO-E", /* LSEC pin 27: GPIO_212 */
+ "[PCIE_CLKREQ_N]",
+ "[PCIE_WAKE_N]",
+ "[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */
+};
+
+&gpio27 {
+ /* GPIO_216-GPIO_223 */
+ gpio-line-names =
+ "[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */
+ "[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */
+ "[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */
+ "GPIO_219_CC_INT",
+ "NC",
+ "NC",
+ "[PMU_INT]",
+ "";
+};
+
+&gpio28 {
+ /* GPIO_224-GPIO_231 */
+ gpio-line-names =
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c0 {
+ /* On Low speed expansion */
+ label = "LS-I2C0";
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ adv7533: adv7533 at 39 {
+ status = "ok";
+ compatible = "adi,adv7533";
+ reg = <0x39>;
+ };
+};
+
+&uart3 {
+ /* On Low speed expansion */
+ label = "LS-UART0";
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,wl1837-st";
+ enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
+ max-speed = <3000000>;
+ };
+};
+
+&i2c7 {
+ /* On Low speed expansion */
+ label = "LS-I2C1";
+ status = "okay";
+};
+
+&uart6 {
+ /* On Low speed expansion */
+ label = "LS-UART1";
+ status = "okay";
+};
+
+&spi2 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+};
+
+&spi3 {
+ /* On High speed expansion */
+ label = "HS-SPI1";
+ status = "okay";
+};
+
+&dwmmc1 {
+ cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pmx_func
+ &sd_clk_cfg_func
+ &sd_cfg_func>;
+ vmmc-supply = <&ldo16>;
+ vqmmc-supply = <&ldo9>;
+ status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+ bus-width = <0x4>;
+ non-removable;
+ broken-cd;
+ cap-power-off-card;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pmx_func
+ &sdio_clk_cfg_func
+ &sdio_cfg_func>;
+ /* WL_EN */
+ vmmc-supply = <&wlan_en>;
+ status = "ok";
+
+ wlcore: wlcore at 2 {
+ compatible = "ti,wl1837";
+ reg = <2>; /* sdio func num */
+ /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
+ interrupt-parent = <&gpio22>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ };
+};
--
2.17.1
More information about the U-Boot
mailing list