[U-Boot] [PATCH v2 3/6] net: mvpp2: mark phy as invalid in case of missing appropriate driver

Ramon Fried rfried.dev at gmail.com
Sat Aug 3 13:55:30 UTC 2019


On Sat, Aug 3, 2019 at 4:56 AM <nhed+uboot at starry.com> wrote:
>
> From: Grzegorz Jaszczyk <jaz at semihalf.com>
>
> If the phy doesn't match with any existing u-boot drivers the phy
> framework will connect it to generic one which uid == 0xffffffff. In
> this case act as if the phy wouldn't be declared in dts. Otherwise in
> case of 3310 (for which the driver doesn't exist) the link will be
> marked as always down. Removing phy entry from dts in case of 3310 is
> not good option because it is required for the phy_fw_down procedure.
>
> This patch fixes the issue with the link always down on MCBIN board.
>
> Signed-off-by: Grzegorz Jaszczyk <jaz at semihalf.com>
> Reviewed-on: http://vgitil04.il.marvell.com:8080/58907
This should be pushed to mailing list.
> Reviewed-by: Igal Liberman <igall at marvell.com>
> Tested-by: Igal Liberman <igall at marvell.com>
> ---
>  drivers/net/mvpp2.c | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>
> diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
> index b6dfed5c54..fae7090121 100644
> --- a/drivers/net/mvpp2.c
> +++ b/drivers/net/mvpp2.c
> @@ -4484,6 +4484,27 @@ static void mvpp2_phy_connect(struct udevice *dev, struct mvpp2_port *port)
>         if (!port->init || port->link == 0) {
>                 phy_dev = phy_connect(port->bus, port->phyaddr, dev,
>                                       port->phy_interface);
> +
> +               /* If the phy doesn't match with any existing u-boot drivers the
> +                * phy framework will connect it to generic one which
> +                * uid == 0xffffffff. In this case act as if the phy wouldn't be
> +                * declared in dts. Otherwise in case of 3310 (for which the
> +                * driver doesn't exist) the link will not be correctly
> +                * detected. Removing phy entry from dts in case of 3310 is not
> +                * an option because it is required for the phy_fw_down
> +                * procedure.
> +                */
> +               if (phy_dev->drv->uid == 0xffffffff) {/* Generic phy */
> +                       netdev_warn(port->dev,
> +                                   "Marking phy as invalid, link will not be checked\n");
> +                       /* set phy_addr to invalid value */
> +                       port->phyaddr = PHY_MAX_ADDR;
> +                       mvpp2_egress_enable(port);
> +                       mvpp2_ingress_enable(port);
> +
> +                       return;
> +               }
> +
>                 port->phy_dev = phy_dev;
>                 if (!phy_dev) {
>                         netdev_err(port->dev, "cannot connect to phy\n");
> --
> 2.21.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
Please remove the Reviewed-On line, besides,
Reviewed-By: Ramon Fried <rfried.dev at gmail.com>


More information about the U-Boot mailing list