[U-Boot] [PATCH v2 2/6] phy: mediatek: add MediaTek T-PHY support for PCIe
Frank Wunderlich
frank-w at public-files.de
Sun Aug 4 17:23:38 UTC 2019
From: Ryder Lee <ryder.lee at mediatek.com>
The driver provides PHY for USB2, USB3.0, PCIe and SATA, and now
we just enable PCIe. As for the other functionalities will be
added gradually in upcoming days.
Tested-by: Frank Wunderlich <frank-w at public-files.de>
Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
Signed-off-by: Ryder Lee <ryder.lee at mediatek.com>
---
drivers/phy/Kconfig | 11 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-mtk-tphy.c | 388 +++++++++++++++++++++++++++++++++++++
3 files changed, 400 insertions(+)
create mode 100644 drivers/phy/phy-mtk-tphy.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 957efb3984..2099dd9547 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -190,4 +190,15 @@ config MT76X8_USB_PHY
This PHY is found on MT76x8 devices supporting USB.
+config PHY_MTK_TPHY
+ bool "MediaTek T-PHY Driver"
+ depends on PHY
+ depends on ARCH_MEDIATEK
+ help
+ MediaTek T-PHY driver supports usb2.0, usb3.0 ports, PCIe and
+ SATA, and meanwhile supports two version T-PHY which have
+ different banks layout, the T-PHY with shared banks between
+ multi-ports is first version, otherwise is second veriosn,
+ so you can easily distinguish them by banks layout.
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 90646ca55b..15b4d58a2d 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
obj-$(CONFIG_OMAP_USB2_PHY) += omap-usb2-phy.o
obj-$(CONFIG_KEYSTONE_USB_PHY) += keystone-usb-phy.o
obj-$(CONFIG_MT76X8_USB_PHY) += mt76x8-usb-phy.o
+obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
diff --git a/drivers/phy/phy-mtk-tphy.c b/drivers/phy/phy-mtk-tphy.c
new file mode 100644
index 0000000000..422e727c22
--- /dev/null
+++ b/drivers/phy/phy-mtk-tphy.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 - 2019 MediaTek Inc.
+ * Author: Chunfeng Yun <chunfeng.yun at mediatek.com>
+ * Ryder Lee <ryder.lee at mediatek.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <mapmem.h>
+#include <asm/io.h>
+
+#include <dt-bindings/phy/phy.h>
+
+/* version V1 sub-banks offset base address */
+/* banks shared by multiple phys */
+#define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */
+#define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */
+/* u3/pcie/sata phy banks */
+#define SSUSB_SIFSLV_V1_U3PHYD 0x000
+#define SSUSB_SIFSLV_V1_U3PHYA 0x200
+
+#define U3P_U3_CHIP_GPIO_CTLD 0x0c
+#define P3C_REG_IP_SW_RST BIT(31)
+#define P3C_MCU_BUS_CK_GATE_EN BIT(30)
+#define P3C_FORCE_IP_SW_RST BIT(29)
+
+#define U3P_U3_CHIP_GPIO_CTLE 0x10
+#define P3C_RG_SWRST_U3_PHYD BIT(25)
+#define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24)
+
+#define U3P_U3_PHYA_REG0 0x000
+#define P3A_RG_CLKDRV_OFF GENMASK(3, 2)
+#define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2)
+
+#define U3P_U3_PHYA_REG1 0x004
+#define P3A_RG_CLKDRV_AMP GENMASK(31, 29)
+#define P3A_RG_CLKDRV_AMP_VAL(x) ((0x7 & (x)) << 29)
+
+#define U3P_U3_PHYA_DA_REG0 0x100
+#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16)
+#define P3A_RG_XTAL_EXT_PE2H_VAL(x) ((0x3 & (x)) << 16)
+#define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12)
+#define P3A_RG_XTAL_EXT_PE1H_VAL(x) ((0x3 & (x)) << 12)
+#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10)
+#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10)
+
+#define U3P_U3_PHYA_DA_REG4 0x108
+#define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19)
+#define P3A_RG_PLL_BC_PE2H GENMASK(7, 6)
+#define P3A_RG_PLL_BC_PE2H_VAL(x) ((0x3 & (x)) << 6)
+
+#define U3P_U3_PHYA_DA_REG5 0x10c
+#define P3A_RG_PLL_BR_PE2H GENMASK(29, 28)
+#define P3A_RG_PLL_BR_PE2H_VAL(x) ((0x3 & (x)) << 28)
+#define P3A_RG_PLL_IC_PE2H GENMASK(15, 12)
+#define P3A_RG_PLL_IC_PE2H_VAL(x) ((0xf & (x)) << 12)
+
+#define U3P_U3_PHYA_DA_REG6 0x110
+#define P3A_RG_PLL_IR_PE2H GENMASK(19, 16)
+#define P3A_RG_PLL_IR_PE2H_VAL(x) ((0xf & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG7 0x114
+#define P3A_RG_PLL_BP_PE2H GENMASK(19, 16)
+#define P3A_RG_PLL_BP_PE2H_VAL(x) ((0xf & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG20 0x13c
+#define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16)
+#define P3A_RG_PLL_DELTA1_PE2H_VAL(x) ((0xffff & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG25 0x148
+#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0)
+#define P3A_RG_PLL_DELTA_PE2H_VAL(x) (0xffff & (x))
+
+#define U3P_U3_PHYD_RXDET1 0x128
+#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9)
+#define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9)
+
+#define U3P_U3_PHYD_RXDET2 0x12c
+#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0)
+#define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x))
+
+struct u3phy_banks {
+ void __iomem *spllc;
+ void __iomem *chip;
+ void __iomem *phyd; /* include u3phyd_bank2 */
+ void __iomem *phya; /* include u3phya_da */
+};
+
+struct mtk_phy_instance {
+ void __iomem *port_base;
+ const struct device_node *np;
+
+ struct u3phy_banks u3_banks;
+
+ /* reference clock of anolog phy */
+ struct clk ref_clk;
+ u32 index;
+ u8 type;
+};
+
+struct mtk_tphy {
+ void __iomem *sif_base;
+ struct mtk_phy_instance **phys;
+ int nphys;
+};
+
+static void pcie_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+ u32 tmp;
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+ tmp &= ~(P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H);
+ tmp |= P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | P3A_RG_XTAL_EXT_PE2H_VAL(0x2);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+
+ /* ref clk drive */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG1);
+ tmp &= ~P3A_RG_CLKDRV_AMP;
+ tmp |= P3A_RG_CLKDRV_AMP_VAL(0x4);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG1);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+ tmp &= ~P3A_RG_CLKDRV_OFF;
+ tmp |= P3A_RG_CLKDRV_OFF_VAL(0x1);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG0);
+
+ /* SSC delta -5000ppm */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG20);
+ tmp &= ~P3A_RG_PLL_DELTA1_PE2H;
+ tmp |= P3A_RG_PLL_DELTA1_PE2H_VAL(0x3c);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG20);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG25);
+ tmp &= ~P3A_RG_PLL_DELTA_PE2H;
+ tmp |= P3A_RG_PLL_DELTA_PE2H_VAL(0x36);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG25);
+
+ /* change pll BW 0.6M */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG5);
+ tmp &= ~(P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H);
+ tmp |= P3A_RG_PLL_BR_PE2H_VAL(0x1) | P3A_RG_PLL_IC_PE2H_VAL(0x1);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG5);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG4);
+ tmp &= ~(P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H);
+ tmp |= P3A_RG_PLL_BC_PE2H_VAL(0x3);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG4);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG6);
+ tmp &= ~P3A_RG_PLL_IR_PE2H;
+ tmp |= P3A_RG_PLL_IR_PE2H_VAL(0x2);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG6);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG7);
+ tmp &= ~P3A_RG_PLL_BP_PE2H;
+ tmp |= P3A_RG_PLL_BP_PE2H_VAL(0xa);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG7);
+
+ /* Tx Detect Rx Timing: 10us -> 5us */
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+ tmp &= ~P3D_RG_RXDET_STB2_SET;
+ tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+ tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
+ tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+
+ /* wait for PCIe subsys register to active */
+ udelay(3000);
+}
+
+static void pcie_phy_instance_power_on(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *bank = &instance->u3_banks;
+ u32 tmp;
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+ tmp &= ~(P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST);
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+ tmp &= ~(P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+}
+
+static void pcie_phy_instance_power_off(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+
+{
+ struct u3phy_banks *bank = &instance->u3_banks;
+ u32 tmp;
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+ tmp |= P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST;
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+ tmp |= P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD;
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+}
+
+static void phy_v1_banks_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ switch (instance->type) {
+ case PHY_TYPE_PCIE:
+ u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
+ u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP;
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+ u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
+ break;
+ default:
+ return;
+ }
+}
+
+static int mtk_phy_init(struct phy *phy)
+{
+ struct mtk_tphy *tphy = dev_get_priv(phy->dev);
+ struct mtk_phy_instance *instance = tphy->phys[phy->id];
+ int ret;
+
+ /* we may use a fixed-clock here */
+ ret = clk_enable(&instance->ref_clk);
+ if (ret && ret != -ENOSYS)
+ return ret;
+
+ switch (instance->type) {
+ case PHY_TYPE_PCIE:
+ pcie_phy_instance_init(tphy, instance);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mtk_phy_power_on(struct phy *phy)
+{
+ struct mtk_tphy *tphy = dev_get_priv(phy->dev);
+ struct mtk_phy_instance *instance = tphy->phys[phy->id];
+
+ pcie_phy_instance_power_on(tphy, instance);
+
+ return 0;
+}
+
+static int mtk_phy_power_off(struct phy *phy)
+{
+ struct mtk_tphy *tphy = dev_get_priv(phy->dev);
+ struct mtk_phy_instance *instance = tphy->phys[phy->id];
+
+ pcie_phy_instance_power_off(tphy, instance);
+
+ return 0;
+}
+
+static int mtk_phy_exit(struct phy *phy)
+{
+ struct mtk_tphy *tphy = dev_get_priv(phy->dev);
+ struct mtk_phy_instance *instance = tphy->phys[phy->id];
+
+ clk_disable(&instance->ref_clk);
+
+ return 0;
+}
+
+static int mtk_phy_xlate(struct phy *phy,
+ struct ofnode_phandle_args *args)
+{
+ struct mtk_tphy *tphy = dev_get_priv(phy->dev);
+ struct mtk_phy_instance *instance = NULL;
+ const struct device_node *phy_np = ofnode_to_np(args->node);
+ u32 index;
+
+ if (!phy_np) {
+ dev_err(phy->dev, "null pointer phy node\n");
+ return -EINVAL;
+ }
+
+ if (args->args_count < 1) {
+ dev_err(phy->dev, "invalid number of cells in 'phy' property\n");
+ return -EINVAL;
+ }
+
+ for (index = 0; index < tphy->nphys; index++)
+ if (phy_np == tphy->phys[index]->np) {
+ instance = tphy->phys[index];
+ break;
+ }
+
+ if (!instance) {
+ dev_err(phy->dev, "failed to find appropriate phy\n");
+ return -EINVAL;
+ }
+
+ phy->id = index;
+ instance->type = args->args[1];
+ if (!(instance->type == PHY_TYPE_USB2 ||
+ instance->type == PHY_TYPE_USB3 ||
+ instance->type == PHY_TYPE_PCIE ||
+ instance->type == PHY_TYPE_SATA)) {
+ dev_err(phy->dev, "unsupported device type\n");
+ return -EINVAL;
+ }
+
+ phy_v1_banks_init(tphy, instance);
+
+ return 0;
+}
+
+static const struct phy_ops mtk_tphy_ops = {
+ .init = mtk_phy_init,
+ .exit = mtk_phy_exit,
+ .power_on = mtk_phy_power_on,
+ .power_off = mtk_phy_power_off,
+ .of_xlate = mtk_phy_xlate,
+};
+
+static int mtk_tphy_probe(struct udevice *dev)
+{
+ struct mtk_tphy *tphy = dev_get_priv(dev);
+ ofnode subnode;
+ int index = 0;
+
+ dev_for_each_subnode(subnode, dev)
+ tphy->nphys++;
+
+ tphy->phys = devm_kcalloc(dev, tphy->nphys, sizeof(*tphy->phys),
+ GFP_KERNEL);
+ if (!tphy->phys)
+ return -ENOMEM;
+
+ tphy->sif_base = dev_read_addr_ptr(dev);
+ if (!tphy->sif_base)
+ return -ENOENT;
+
+ dev_for_each_subnode(subnode, dev) {
+ struct mtk_phy_instance *instance;
+ fdt_addr_t addr;
+ int err;
+
+ instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
+ if (!instance)
+ return -ENOMEM;
+
+ addr = ofnode_get_addr(subnode);
+ if (addr == FDT_ADDR_T_NONE)
+ return -ENOMEM;
+
+ instance->port_base = map_sysmem(addr, 0);
+ instance->index = index;
+ instance->np = ofnode_to_np(subnode);
+ tphy->phys[index] = instance;
+ index++;
+
+ err = clk_get_by_index_nodev(subnode, 0, &instance->ref_clk);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id mtk_tphy_id_table[] = {
+ { .compatible = "mediatek,generic-tphy-v1", },
+ { }
+};
+
+U_BOOT_DRIVER(mtk_tphy) = {
+ .name = "mtk-tphy",
+ .id = UCLASS_PHY,
+ .of_match = mtk_tphy_id_table,
+ .ops = &mtk_tphy_ops,
+ .probe = mtk_tphy_probe,
+ .priv_auto_alloc_size = sizeof(struct mtk_tphy),
+};
--
2.17.1
More information about the U-Boot
mailing list