[U-Boot] [PATCH 09/15] wdt: dw: Rename to dw_wdt.c
Kever Yang
kever.yang at rock-chips.com
Mon Aug 5 12:40:17 UTC 2019
On 2019/7/29 下午3:47, Jagan Teki wrote:
> - use dw instead of designware for driver file since
> Linux following the same.
> - add CONFIG macro start with CONFIG_WDT since the
> driver mode wdt drivers follow this.
>
> Cc: Dinh Nguyen <dinguyen at kernel.org>
> Cc: Chin-Liang See <clsee at altera.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> common/board_f.c | 2 +-
> drivers/watchdog/Makefile | 2 +-
> drivers/watchdog/{designware_wdt.c => dw_wdt.c} | 0
> include/configs/socfpga_common.h | 2 +-
> include/configs/socfpga_stratix10_socdk.h | 2 +-
> scripts/config_whitelist.txt | 2 +-
> 6 files changed, 5 insertions(+), 5 deletions(-)
> rename drivers/watchdog/{designware_wdt.c => dw_wdt.c} (100%)
>
> diff --git a/common/board_f.c b/common/board_f.c
> index 4760d728f3..79efef0792 100644
> --- a/common/board_f.c
> +++ b/common/board_f.c
> @@ -95,7 +95,7 @@ static int init_func_watchdog_init(void)
> # if defined(CONFIG_HW_WATCHDOG) && \
> (defined(CONFIG_M68K) || defined(CONFIG_MICROBLAZE) || \
> defined(CONFIG_SH) || \
> - defined(CONFIG_DESIGNWARE_WATCHDOG) || \
> + defined(CONFIG_WDT_DW) || \
> defined(CONFIG_IMX_WATCHDOG))
> hw_watchdog_init();
> puts(" Watchdog enabled\n");
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 68c989aa0b..a14fdabf8d 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -13,7 +13,6 @@ endif
> obj-$(CONFIG_S5P) += s5p_wdt.o
> obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
> obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
> -obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
> obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o
> obj-$(CONFIG_WDT) += wdt-uclass.o
> obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
> @@ -23,6 +22,7 @@ obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o
> obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
> obj-$(CONFIG_WDT_ORION) += orion_wdt.o
> obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
> +obj-$(CONFIG_WDT_DW) += dw_wdt.o
> obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
> obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
> obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
> diff --git a/drivers/watchdog/designware_wdt.c b/drivers/watchdog/dw_wdt.c
> similarity index 100%
> rename from drivers/watchdog/designware_wdt.c
> rename to drivers/watchdog/dw_wdt.c
> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
> index d1034ac280..65f02eca2e 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -105,7 +105,7 @@
> * L4 Watchdog
> */
> #ifdef CONFIG_HW_WATCHDOG
> -#define CONFIG_DESIGNWARE_WATCHDOG
> +#define CONFIG_WDT_DW
> #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
> #define CONFIG_DW_WDT_CLOCK_KHZ 25000
> #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000
> diff --git a/include/configs/socfpga_stratix10_socdk.h b/include/configs/socfpga_stratix10_socdk.h
> index 8d2971c6e2..3582aec822 100644
> --- a/include/configs/socfpga_stratix10_socdk.h
> +++ b/include/configs/socfpga_stratix10_socdk.h
> @@ -161,7 +161,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> */
> #ifdef CONFIG_SPL_BUILD
> #define CONFIG_HW_WATCHDOG
> -#define CONFIG_DESIGNWARE_WATCHDOG
> +#define CONFIG_WDT_DW
> #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
> #ifndef __ASSEMBLY__
> unsigned int cm_get_l4_sys_free_clk_hz(void);
> diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
> index e616f7229b..f2453728c6 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -323,7 +323,7 @@ CONFIG_DEFAULT_IMMR
> CONFIG_DEF_HWCONFIG
> CONFIG_DELAY_ENVIRONMENT
> CONFIG_DESIGNWARE_ETH
> -CONFIG_DESIGNWARE_WATCHDOG
> +CONFIG_WDT_DW
Is it better to define a WDT_DW in drivers/watchdog/Kconfig so that we
don't need
this white list?
Thanks,
- Kever
> CONFIG_DEVELOP
> CONFIG_DEVICE_TREE_LIST
> CONFIG_DFU_ALT
More information about the U-Boot
mailing list