[U-Boot] [PATCH v2 6/7] configs: rk3328: enable TPL for rock64-rk3328_defconfig

[Kever Yang]

On 2019/8/2 下午3:40, Matwey V. Kornilov wrote:
> Until now, binary TPL by Rockchip has been required for booting
> procedure. Starting from this commit we may use only u-boot to boot
> the device.
>
> Note, that using binary TPL instead of U-boot TPL is still working.
>
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov at gmail.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/rock64-rk3328_defconfig | 14 ++++++++++++++
>   1 file changed, 14 insertions(+)
>
> diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> index ef453e72c1..6484845fb6 100644
> --- a/configs/rock64-rk3328_defconfig
> +++ b/configs/rock64-rk3328_defconfig
> @@ -34,15 +34,20 @@ CONFIG_CMD_USB=y
>   CONFIG_CMD_TIME=y
>   CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
>   CONFIG_SPL_OF_CONTROL=y
> +CONFIG_TPL_OF_CONTROL=y
>   CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_TPL_OF_PLATDATA=y
>   CONFIG_ENV_IS_IN_MMC=y
>   CONFIG_NET_RANDOM_ETHADDR=y
>   CONFIG_REGMAP=y
>   CONFIG_SPL_REGMAP=y
> +CONFIG_TPL_REGMAP=y
>   CONFIG_SYSCON=y
>   CONFIG_SPL_SYSCON=y
> +CONFIG_TPL_SYSCON=y
>   CONFIG_CLK=y
>   CONFIG_SPL_CLK=y
> +CONFIG_TPL_CLK=y
>   CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
>   CONFIG_ROCKCHIP_GPIO=y
>   CONFIG_SYS_I2C_ROCKCHIP=y
> @@ -65,6 +70,7 @@ CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
>   CONFIG_RAM=y
>   CONFIG_SPL_RAM=y
> +CONFIG_TPL_RAM=y
>   CONFIG_DM_RESET=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
> @@ -85,4 +91,12 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
>   CONFIG_USB_GADGET_DWC2_OTG=y
>   CONFIG_USE_TINY_PRINTF=y
>   CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_TPL_TINY_MEMSET=y
>   CONFIG_ERRNO_STR=y
> +CONFIG_TPL_DM=y
> +CONFIG_TPL_LIBCOMMON_SUPPORT=y
> +CONFIG_TPL_LIBGENERIC_SUPPORT=y
> +CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
> +CONFIG_TPL_BOOTROM_SUPPORT=y
> +CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
> +CONFIG_TPL_SYS_MALLOC_SIMPLE=y