[U-Boot] [PATCH v3 06/10] apalis-tk1: switch to zImage

Igor Opaniuk igor.opaniuk at gmail.com
Mon Aug 5 15:20:43 UTC 2019


From: Igor Opaniuk <igor.opaniuk at toradex.com>

Switch to the generic compressed Kernel image type (zImage) instead of
the U-Boot specific uImage format.

Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv at toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
---

 include/configs/apalis-tk1.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index d2ea5450bd..ae62f00cd1 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -44,7 +44,7 @@
 #define DFU_ALT_EMMC_INFO	"apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
 				"boot part 0 1 mmcpart 0; " \
 				"rootfs part 0 2 mmcpart 0; " \
-				"uImage fat 0 1 mmcpart 0; " \
+				"zImage fat 0 1 mmcpart 0; " \
 				"tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
 
 #define EMMC_BOOTCMD \
@@ -53,7 +53,7 @@
 		"${setupargs} ${vidargs}; echo Booting from internal eMMC " \
 		"chip...; run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 		"${boot_file} && run fdt_fixup && " \
-		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
+		"bootz ${kernel_addr_r} - ${dtbparam}\0" \
 	"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 		"${soc}-apalis-${fdt_board}.dtb && " \
 		"setenv dtbparam ${fdt_addr_r}\0"
@@ -63,7 +63,7 @@
 	"nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
 		"${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 		"run nfsdtbload; dhcp ${kernel_addr_r} " \
-		"&& run fdt_fixup && bootm ${kernel_addr_r} - ${dtbparam}\0" \
+		"&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
 	"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
 		"${soc}-apalis-${fdt_board}.dtb " \
 		"&& setenv dtbparam ${fdt_addr_r}\0"
@@ -74,7 +74,7 @@
 		"${vidargs}; echo Booting from SD card in 8bit slot...; " \
 		"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 		"${boot_file} && run fdt_fixup && " \
-		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
+		"bootz ${kernel_addr_r} - ${dtbparam}\0" \
 	"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 		"${soc}-apalis-${fdt_board}.dtb " \
 		"&& setenv dtbparam ${fdt_addr_r}\0"
@@ -85,13 +85,13 @@
 		"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 		"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 		"${boot_file} && run fdt_fixup && " \
-		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
+		"bootz ${kernel_addr_r} - ${dtbparam}\0" \
 	"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 		"${soc}-apalis-${fdt_board}.dtb " \
 		"&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define BOARD_EXTRA_ENV_SETTINGS \
-	"boot_file=uImage\0" \
+	"boot_file=zImage\0" \
 	"console=ttyS0\0" \
 	"defargs=lp0_vec=2064 at 0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
 		"usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
-- 
2.17.1



More information about the U-Boot mailing list