[U-Boot] [PATCH 3/4] imx6: spl: Reduce SPL limit size in case CONFIG_SECURE_BOOT is enabled

[sbabic at denx.de]

> In case CONFIG_SECURE_BOOT is enabled we need to limit the SPL size to
> avoid a possible HAB failure event:
> --------- HAB Event 1 -----------------
> event data:
>         0xdb 0x00 0x14 0x42 0x33 0x22 0x33 0x00
>         0x00 0x00 0x00 0x0f 0x00 0x90 0x70 0x00
>         0x00 0x01 0x10 0x00
> STS = HAB_FAILURE (0x33)
> RSN = HAB_INV_ADDRESS (0x22)
> CTX = HAB_CTX_TARGET (0x33)
> ENG = HAB_ENG_ANY (0x00)
> As explained in Commit 23612534fe0f ("spl: imx6: Provide a SPL_SIZE_LIMIT
> default") the i.MX6 SPL size limit is 68KB.
> The ROM code is copying the image size defined in boot data to its
> respective load address, in case we exceed the OCRAM free region a
> HAB invalid address failure event is generated.
> The maximum CSF size is defined in CONFIG_CSF_SIZE, reduce SPL size
> limit based on this configuration.
> Signed-off-by: Breno Lima <breno.lima at nxp.com>
> Reviewed-by: Fabio Estevam <festevam at gmail.com>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================