[U-Boot] [PATCH v2 3/3] arm: mvebu: clearfog: update eMMC documentation

[Stefan Roese]

On 29.07.19 09:12, Baruch Siach wrote:
> SPL now automatically selects the correct U-Boot image offset for both
> eMMC and SD card. No need to tweak
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore.
> 
> Signed-off-by: Baruch Siach <baruch at tkos.co.il>
> ---
>   board/solidrun/clearfog/README | 6 ------
>   1 file changed, 6 deletions(-)
> 
> diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README
> index 6171ce66f4f8..9375be84957a 100644
> --- a/board/solidrun/clearfog/README
> +++ b/board/solidrun/clearfog/README
> @@ -20,12 +20,6 @@ of "/dev/sdX" here!
>   Install U-Boot on eMMC:
>   -----------------------
>   
> -The ROM loads the bootloader from eMMC first boot partition at offset 0. This
> -is unlike load from SD card that is at offset 512. As a result, the offset of
> -the main U-Boot image on the eMMC boot partition changes. Set
> -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x140 for SPL to load U-Boot from
> -the correct location.
> -
>   To make SPL load the main U-Boot image from the eMMC boot partition enable
>   eMMC boot acknowledgement and boot partition with the following U-Boot
>   command:

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan