[U-Boot] [PATCH] spi: add NXP FlexSPI driver
Peng Fan
peng.fan at nxp.com
Wed Aug 7 09:11:51 UTC 2019
> Subject: [PATCH] spi: add NXP FlexSPI driver
Please ignore this patch.
Thanks,
Peng.
>
> Add NXP Flexspi driver for i.MX8 Family usage.
> Flexible Serial Peripheral Interface (FlexSPI) host controller supports two SPI
> channels and up to 4 external devices.
> Each channel supports Single/Dual/Quad/Octal mode data transfer (1/2/4/8
> bidirectional data lines).
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
> drivers/spi/Kconfig | 19 +
> drivers/spi/Makefile | 1 +
> drivers/spi/fsl_fspi.c | 1291
> ++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/spi/fsl_fspi.h | 170 +++++++
> 4 files changed, 1481 insertions(+)
> create mode 100644 drivers/spi/fsl_fspi.c create mode 100644
> drivers/spi/fsl_fspi.h
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index
> f459c0a411..b71f289fb7 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -372,6 +372,25 @@ config FSL_ESPI
> access the SPI interface and SPI NOR flash on platforms embedding
> this Freescale eSPI IP core.
>
> +config FSL_FSPI
> + bool "NXP FlexSPI driver"
> + help
> + Enable the NXP FlexSPI (FSPI) driver. This driver can be
> + used to access the SPI NOR flash on platforms embedding this
> + NXP IP core.
> +
> +if FSL_FSPI
> +config FSPI_QUAD_SUPPORT
> + bool "FlexSPI QUAD support"
> + help
> + Enable Quad Read/write
> +
> +config FSPI_AHB
> + bool "FlexSPI AHB support"
> + help
> + Enable AHB buffer read
> +endif
> +
> config FSL_QSPI
> bool "Freescale QSPI driver"
> imply SPI_FLASH_BAR
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index
> ae4f2958f8..867feb994b 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
> obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
> obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o
> obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
> +obj-$(CONFIG_FSL_FSPI) += fsl_fspi.o
> obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
> obj-$(CONFIG_ICH_SPI) += ich.o
> obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o diff --git
> a/drivers/spi/fsl_fspi.c b/drivers/spi/fsl_fspi.c new file mode 100644 index
> 0000000000..7f9d2f0b45
> --- /dev/null
> +++ b/drivers/spi/fsl_fspi.c
> @@ -0,0 +1,1291 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019 NXP
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <linux/sizes.h>
> +#include <malloc.h>
> +#include <spi.h>
> +#include <watchdog.h>
> +
> +#include "fsl_fspi.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define RX_BUFFER_SIZE 0x200
> +#define TX_BUFFER_SIZE 0x400
> +#define AHB_BUFFER_SIZE 0x800
> +
> +/* SEQID */
> +#define SEQID_READ 0
> +#define SEQID_WREN 1
> +#define SEQID_FAST_READ 2
> +#define SEQID_RDSR 3
> +#define SEQID_SE 4
> +#define SEQID_CHIP_ERASE 5
> +#define SEQID_PP 6
> +#define SEQID_RDID 7
> +#define SEQID_BE_4K 8
> +#ifdef CONFIG_SPI_FLASH_BAR
> +#define SEQID_BRRD 9
> +#define SEQID_BRWR 10
> +#define SEQID_RDEAR 11
> +#define SEQID_WREAR 12
> +#endif
> +#define SEQID_RDEVCR 13
> +#define SEQID_WREVCR 14
> +#define SEQID_QUAD_OUTPUT 15
> +#define SEQID_RDFSR 16
> +#define SEQID_EN4B 17
> +#define SEQID_CRFSR 18
> +
> +/* FSPI CMD */
> +#define FSPI_CMD_PP 0x02 /* Page program (up to 256 bytes) */
> +#define FSPI_CMD_RDSR 0x05 /* Read status register */
> +#define FSPI_CMD_WREN 0x06 /* Write enable */
> +#define FSPI_CMD_FAST_READ 0x0b /* Read data bytes (high
> frequency) */
> +#define FSPI_CMD_READ 0x03 /* Read data bytes */
> +#define FSPI_CMD_BE_4K 0x20 /* 4K erase */
> +#define FSPI_CMD_CHIP_ERASE 0xc7 /* Erase whole flash chip */
> +#define FSPI_CMD_SE 0xd8 /* Sector erase (usually 64KiB) */
> +#define FSPI_CMD_RDID 0x9f /* Read JEDEC ID */
> +
> +/* Used for Micron, winbond and Macronix flashes */
> +#define FSPI_CMD_WREAR 0xc5 /* EAR register write */
> +#define FSPI_CMD_RDEAR 0xc8 /* EAR reigster read */
> +
> +/* Used for Spansion flashes only. */
> +#define FSPI_CMD_BRRD 0x16 /* Bank register read */
> +#define FSPI_CMD_BRWR 0x17 /* Bank register write */
> +
> +/* 4-byte address FSPI CMD - used on Spansion and some Macronix flashes
> */
> +#define FSPI_CMD_FAST_READ_4B 0x0c /* Read data bytes (high
> frequency) */
> +#define FSPI_CMD_PP_4B 0x12 /* Page program (up to 256 bytes)
> */
> +#define FSPI_CMD_SE_4B 0xdc /* Sector erase (usually 64KiB) */
> +#define FSPI_CMD_BE_4K_4B 0x21 /* 4K erase */
> +
> +#define FSPI_CMD_RD_EVCR 0x65 /* Read EVCR register */
> +#define FSPI_CMD_WR_EVCR 0x61 /* Write EVCR register */
> +
> +#define FSPI_CMD_EN4B 0xB7
> +
> +/* 1-1-4 READ CMD */
> +#define FSPI_CMD_QUAD_OUTPUT 0x6b
> +#define FSPI_CMD_DDR_QUAD_OUTPUT 0x6d
> +
> +/* read flag status register */
> +#define FSPI_CMD_RDFSR 0x70
> +#define FSPI_CMD_CRFSR 0x50
> +
> +/* fsl_fspi_platdata flags */
> +#define FSPI_FLAG_REGMAP_ENDIAN_BIG BIT(0)
> +
> +/* default SCK frequency, unit: HZ */
> +#define FSL_FSPI_DEFAULT_SCK_FREQ 50000000
> +
> +/* FSPI max chipselect signals number */
> +#define FSL_FSPI_MAX_CHIPSELECT_NUM 4
> +
> +#define FSPI_AHB_BASE_ADDR 0x08000000
> +
> +/**
> + * struct fsl_fspi_platdata - platform data for NXP FSPI
> + *
> + * @flags: Flags for FSPI FSPI_FLAG_...
> + * @speed_hz: Default SCK frequency
> + * @reg_base: Base address of FSPI registers
> + * @amba_base: Base address of FSPI memory mapping
> + * @amba_total_size: size of FSPI memory mapping
> + * @flash_num: Number of active slave devices
> + * @num_chipselect: Number of FSPI chipselect signals */ struct
> +fsl_fspi_platdata {
> + u32 flags;
> + u32 speed_hz;
> + u32 reg_base;
> + u32 amba_base;
> + u32 amba_total_size;
> + u32 flash_num;
> + u32 num_chipselect;
> +};
> +
> +/**
> + * struct fsl_fspi_priv - private data for NXP FSPI
> + *
> + * @flags: Flags for FSPI FSPI_FLAG_...
> + * @bus_clk: FSPI input clk frequency
> + * @speed_hz: Default SCK frequency
> + * @cur_seqid: current LUT table sequence id
> + * @sf_addr: flash access offset
> + * @amba_base: Base address of FSPI memory mapping of every CS
> + * @amba_total_size: size of FSPI memory mapping
> + * @cur_amba_base: Base address of FSPI memory mapping of current CS
> + * @flash_num: Number of active slave devices
> + * @num_chipselect: Number of FSPI chipselect signals
> + * @regs: Point to FSPI register structure for I/O access */ struct
> +fsl_fspi_priv {
> + u32 flags;
> + u32 bus_clk;
> + u32 speed_hz;
> + u32 cur_seqid;
> + u32 sf_addr;
> + u32 amba_base[FSL_FSPI_MAX_CHIPSELECT_NUM];
> + u32 amba_total_size;
> + u32 cur_amba_base;
> + u32 flash_num;
> + u32 num_chipselect;
> + struct fsl_fspi_regs *regs;
> +};
> +
> +static u32 fspi_read32(u32 flags, u32 *addr) {
> + return flags & FSPI_FLAG_REGMAP_ENDIAN_BIG ?
> + in_be32(addr) : in_le32(addr);
> +}
> +
> +static void fspi_write32(u32 flags, u32 *addr, u32 val) {
> + flags & FSPI_FLAG_REGMAP_ENDIAN_BIG ?
> + out_be32(addr, val) : out_le32(addr, val); }
> +
> +static void fspi_set_lut(struct fsl_fspi_priv *priv) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + u32 lut_base;
> +
> + /* Unlock the LUT */
> + fspi_write32(priv->flags, ®s->lutkey, FLEXSPI_LUTKEY_VALUE);
> + fspi_write32(priv->flags, ®s->lutcr, FLEXSPI_LCKER_UNLOCK);
> +
> + /* READ */
> + lut_base = SEQID_READ * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_READ) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1],
> + OPRND0(0) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_READ));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + /* Write Enable */
> + lut_base = SEQID_WREN * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_WREN) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + /* Fast Read */
> + lut_base = SEQID_FAST_READ * 4;
> +#ifdef CONFIG_SPI_FLASH_BAR
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_FAST_READ) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); #else
> + if (FSL_FSPI_FLASH_SIZE <= SZ_16M)
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_FAST_READ) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
> + else
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_FAST_READ_4B) |
> + PAD0(LUT_PAD1) | INSTR0(LUT_CMD) |
> + OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) |
> + INSTR1(LUT_ADDR));
> +#endif
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1],
> + OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) |
> + OPRND1(0) | PAD1(LUT_PAD1) |
> + INSTR1(LUT_READ));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + /* Read Status */
> + lut_base = SEQID_RDSR * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_RDSR) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(1) | PAD1(LUT_PAD1) |
> + INSTR1(LUT_READ));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + /* Erase a sector */
> + lut_base = SEQID_SE * 4;
> +#ifdef CONFIG_SPI_FLASH_BAR
> + fspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(FSPI_CMD_SE) |
> + PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT)
> |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); #else
> + if (FSL_FSPI_FLASH_SIZE <= SZ_16M)
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_SE) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
> + else
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_SE_4B) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); #endif
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + /* Erase the whole chip */
> + lut_base = SEQID_CHIP_ERASE * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_CHIP_ERASE) |
> + PAD0(LUT_PAD1) | INSTR0(LUT_CMD));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + /* Page Program */
> + lut_base = SEQID_PP * 4;
> +#ifdef CONFIG_SPI_FLASH_BAR
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_PP) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | PAD1(LUT_PAD1)
> |
> + INSTR1(LUT_ADDR));
> +#else
> + if (FSL_FSPI_FLASH_SIZE <= SZ_16M)
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_PP) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
> + else
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_PP_4B) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); #endif
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1],
> + OPRND0(0) |
> + PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + /* READ ID */
> + lut_base = SEQID_RDID * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_RDID) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(8) | PAD1(LUT_PAD1) |
> + INSTR1(LUT_READ));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + /* SUB SECTOR 4K ERASE */
> + lut_base = SEQID_BE_4K * 4;
> +#ifdef CONFIG_SPI_FLASH_BAR
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_BE_4K) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | PAD1(LUT_PAD1)
> |
> + INSTR1(LUT_ADDR));
> +#else
> + if (FSL_FSPI_FLASH_SIZE <= SZ_16M)
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_BE_4K) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
> + else
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_BE_4K_4B) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); #endif
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> +#ifdef CONFIG_SPI_FLASH_BAR
> + /*
> + * BRRD BRWR RDEAR WREAR are all supported, because it is hard to
> + * dynamically check whether to set BRRD BRWR or RDEAR WREAR
> during
> + * initialization.
> + */
> + lut_base = SEQID_BRRD * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_BRRD) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(1) | PAD1(LUT_PAD1) |
> + INSTR1(LUT_READ));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + lut_base = SEQID_BRWR * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_BRWR) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(1) | PAD1(LUT_PAD1) |
> + INSTR1(LUT_WRITE));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + lut_base = SEQID_RDEAR * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_RDEAR) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(1) | PAD1(LUT_PAD1) |
> + INSTR1(LUT_READ));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + lut_base = SEQID_WREAR * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_WREAR) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(1) | PAD1(LUT_PAD1) |
> + INSTR1(LUT_WRITE));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0); #endif
> + lut_base = SEQID_RDEVCR * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_RD_EVCR) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + lut_base = SEQID_WREVCR * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_WR_EVCR) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> +#ifdef CONFIG_FSPI_QUAD_SUPPORT
> + /* QUAD OUTPUT READ */
> + lut_base = SEQID_QUAD_OUTPUT * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_DDR_QUAD_OUTPUT) |
> PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
> + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR_DDR));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1],
> + OPRND0(0xc) | PAD0(LUT_PAD4) |
> + INSTR0(LUT_DUMMY_DDR) | OPRND1(0) |
> + PAD1(LUT_PAD4) | INSTR1(LUT_READ_DDR));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0); #endif
> +
> + /* Read Flag Status */
> + lut_base = SEQID_RDFSR * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_RDFSR) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD) | OPRND1(1) | PAD1(LUT_PAD1) |
> + INSTR1(LUT_READ));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + /* Enter 4 bytes address mode */
> + lut_base = SEQID_EN4B * 4;
> + fspi_write32(priv->flags, ®s->lut[lut_base],
> + OPRND0(FSPI_CMD_EN4B) | PAD0(LUT_PAD1) |
> + INSTR0(LUT_CMD));
> + fspi_write32(priv->flags, ®s->lut[lut_base + 1], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
> + fspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
> +
> + /* Lock the LUT */
> + fspi_write32(priv->flags, ®s->lutkey, FLEXSPI_LUTKEY_VALUE);
> + fspi_write32(priv->flags, ®s->lutcr, FLEXSPI_LCKER_LOCK); }
> +
> +#if defined(CONFIG_FSI_AHB)
> +/*
> + * If we have changed the content of the flash by writing or erasing,
> + * we need to invalidate the AHB buffer. If we do not do so, we may
> +read out
> + * the wrong data. The spec tells us reset the AHB domain and Serial
> +Flash
> + * domain at the same time.
> + */
> +static inline void fspi_ahb_invalid(struct fsl_fspi_priv *priv) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + u32 reg;
> +
> + reg = fspi_read32(priv->flags, ®s->mcr0);
> + reg |= FLEXSPI_MCR0_SWRST_MASK;
> + fspi_write32(priv->flags, ®s->mcr0, reg);
> +
> + while ((fspi_read32(priv->flags, ®s->mcr0) & 1))
> + ;
> +}
> +
> +/* Read out the data from the AHB buffer. */ static inline void
> +fspi_ahb_read(struct fsl_fspi_priv *priv, u8 *rxbuf,
> + int len)
> +{
> + /* Read out the data directly from the AHB buffer. */
> + memcpy(rxbuf, (u8 *)(FSPI_AHB_BASE_ADDR +
> + (uintptr_t)priv->sf_addr), len); }
> +
> +/*
> + * There are two different ways to read out the data from the flash:
> + * the "IP Command Read" and the "AHB Command Read".
> + *
> + * The IC guy suggests we use the "AHB Command Read" which is faster
> + * then the "IP Command Read". (What's more is that there is a bug in
> + * the "IP Command Read" in the Vybrid.)
> + *
> + * After we set up the registers for the "AHB Command Read", we can use
> + * the memcpy to read the data directly. A "missed" access to the
> +buffer
> + * causes the controller to clear the buffer, and use the sequence
> +pointed
> + * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
> + */
> +static void fspi_init_ahb_read(struct fsl_fspi_priv *priv) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + int i;
> +
> + /* AHB configuration for access buffer 0~7 .*/
> + for (i = 0; i < 7; i++)
> + fspi_write32(priv->flags, ®s->ahbrxbuf0cr0 + i, 0);
> +
> + /*
> + * Set ADATSZ with the maximum AHB buffer size to improve the read
> + * performance
> + */
> + fspi_write32(priv->flags, ®s->ahbrxbuf7cr0, AHB_BUFFER_SIZE / 8 |
> + FLEXSPI_AHBRXBUF0CR7_PREF_MASK);
> +
> + fspi_write32(priv->flags, ®s->ahbcr,
> FLEXSPI_AHBCR_PREF_EN_MASK);
> + /*
> + * Set the default lut sequence for AHB Read.
> + * Parallel mode is disabled.
> + */
> +#ifdef CONFIG_FSPI_QUAD_SUPPORT
> + fspi_write32(priv->flags, ®s->flsha1cr2, SEQID_QUAD_OUTPUT);
> #else
> + fspi_write32(priv->flags, ®s->flsha1cr2, SEQID_FAST_READ); #endif }
> +#endif
> +
> +#ifdef CONFIG_SPI_FLASH_BAR
> +/* Bank register read/write, EAR register read/write */ static void
> +fspi_op_rdbank(struct fsl_fspi_priv *priv, u8 *rxbuf, u32 len) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + u32 data, seqid;
> +
> + /* invalid the RXFIFO first */
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> +
> + fspi_write32(priv->flags, ®s->ipcr0, priv->cur_amba_base);
> +
> + if (priv->cur_seqid == FSPI_CMD_BRRD)
> + seqid = SEQID_BRRD;
> + else
> + seqid = SEQID_RDEAR;
> +
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (seqid << FLEXSPI_IPCR1_SEQID_SHIFT) | len);
> +
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + /* Wait for command done */
> + while (!(fspi_read32(priv->flags, ®s->intr) &
> + FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + while (1) {
> + data = fspi_read32(priv->flags, ®s->rfdr[0]);
> + memcpy(rxbuf, &data, len);
> + break;
> + }
> +
> + fspi_write32(priv->flags, ®s->intr, FLEXSPI_INTR_IPRXWA_MASK);
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK); }
> +#endif
> +
> +static void fspi_op_rdevcr(struct fsl_fspi_priv *priv, u8 *rxbuf, u32
> +len) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + u32 data;
> +
> + /* invalid the RXFIFO first */
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> +
> + fspi_write32(priv->flags, ®s->ipcr0, priv->cur_amba_base);
> +
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_RDEVCR << FLEXSPI_IPCR1_SEQID_SHIFT) | len);
> +
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + /* Wait for command done */
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + while (1) {
> + data = fspi_read32(priv->flags, ®s->rfdr[0]);
> + memcpy(rxbuf, &data, len);
> + break;
> + }
> +
> + fspi_write32(priv->flags, ®s->intr, FLEXSPI_INTR_IPRXWA_MASK);
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK); }
> +
> +static void fspi_op_wrevcr(struct fsl_fspi_priv *priv, u8 *txbuf, u32
> +len) {
> + struct fsl_fspi_regs *regs = priv->regs;
> +
> + /* invalid the TXFIFO first */
> + fspi_write32(priv->flags, ®s->iptxfcr, FLEXSPI_IPTXFCR_CLR_MASK);
> +
> + fspi_write32(priv->flags, ®s->ipcr0, priv->cur_amba_base);
> +
> + /* Wait for TXFIFO empty*/
> + while (!(fspi_read32(priv->flags, ®s->intr) &
> + FLEXSPI_INTR_IPTXWE_MASK))
> + ;
> +
> + /* write the data to TXFIFO */
> + memcpy(®s->tfdr, txbuf, len);
> +
> + fspi_write32(priv->flags, ®s->intr, FLEXSPI_INTR_IPTXWE_MASK);
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_WREVCR << FLEXSPI_IPCR1_SEQID_SHIFT) | len);
> +
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + /* Wait for command done */
> + while (!(fspi_read32(priv->flags, ®s->intr) &
> + FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + /* invalid the TXFIFO first */
> + fspi_write32(priv->flags, ®s->iptxfcr, FLEXSPI_IPTXFCR_CLR_MASK);
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK); }
> +
> +static void fspi_op_rdid(struct fsl_fspi_priv *priv, u32 *rxbuf, u32
> +len) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + u32 data, size;
> + int i;
> +
> + /* invalid the RXFIFO first */
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> +
> + fspi_write32(priv->flags, ®s->ipcr0, priv->cur_amba_base);
> +
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_RDID << FLEXSPI_IPCR1_SEQID_SHIFT) | len);
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + /* Wait for command done */
> + while (!(fspi_read32(priv->flags, ®s->intr) &
> + FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + i = 0;
> + while ((len <= RX_BUFFER_SIZE) && (len > 0)) {
> + data = fspi_read32(priv->flags, ®s->rfdr[i]);
> + size = (len < 4) ? len : 4;
> + memcpy(rxbuf, &data, size);
> + len -= size;
> + rxbuf++;
> + i++;
> + }
> + fspi_write32(priv->flags, ®s->intr, FLEXSPI_INTR_IPRXWA_MASK);
> +
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK); }
> +
> +#ifndef CONFIG_FSI_AHB
> +/* If not use AHB read, read data from ip interface */ static void
> +fspi_op_read(struct fsl_fspi_priv *priv, u32 *rxbuf, u32 len) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + int i, size, rx_size;
> + u32 to_or_from;
> +
> + to_or_from = priv->sf_addr + priv->cur_amba_base;
> +
> + /* invalid the RXFIFO */
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> +
> + while (len > 0) {
> + WATCHDOG_RESET();
> +
> + fspi_write32(priv->flags, ®s->ipcr0, to_or_from);
> +
> + rx_size = (len > RX_BUFFER_SIZE) ?
> + RX_BUFFER_SIZE : len;
> +
> +#ifdef CONFIG_FSPI_QUAD_SUPPORT
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_QUAD_OUTPUT <<
> FLEXSPI_IPCR1_SEQID_SHIFT) |
> + rx_size);
> +#else
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_FAST_READ << FLEXSPI_IPCR1_SEQID_SHIFT) |
> + rx_size);
> +#endif
> +
> + to_or_from += rx_size;
> + len -= rx_size;
> +
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + size = rx_size / 8;
> + for (i = 0; i < size; ++i) {
> + /* Wait for RXFIFO available*/
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPRXWA_MASK))
> + ;
> +
> + memcpy(rxbuf, ®s->rfdr, 8);
> + rxbuf += 2;
> +
> + /* move the FIFO pointer */
> + fspi_write32(priv->flags, ®s->intr,
> + FLEXSPI_INTR_IPRXWA_MASK);
> + }
> +
> + size = rx_size % 8;
> +
> + if (size) {
> + /* Wait for data filled*/
> + while (!(fspi_read32(priv->flags, ®s->iprxfsts)
> + & FLEXSPI_IPRXFSTS_FILL_MASK))
> + ;
> + memcpy(rxbuf, ®s->rfdr, size);
> + }
> +
> + /* invalid the RXFIFO */
> + fspi_write32(priv->flags, ®s->iprxfcr,
> + FLEXSPI_IPRXFCR_CLR_MASK);
> + fspi_write32(priv->flags, ®s->intr,
> + FLEXSPI_INTR_IPCMDDONE_MASK);
> + }
> +}
> +#endif
> +
> +static void fspi_op_write(struct fsl_fspi_priv *priv, u8 *txbuf, u32
> +len) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + u32 seqid;
> + int i, size, tx_size;
> + u32 to_or_from = 0;
> +
> + /* invalid the TXFIFO first */
> + fspi_write32(priv->flags, ®s->iptxfcr, FLEXSPI_IPTXFCR_CLR_MASK);
> +
> + fspi_write32(priv->flags, ®s->ipcr0, priv->cur_amba_base);
> +
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_WREN << FLEXSPI_IPCR1_SEQID_SHIFT) | 0);
> +
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + /* Wait for command done */
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK);
> +
> + /* invalid the TXFIFO first */
> + fspi_write32(priv->flags, ®s->iptxfcr, FLEXSPI_IPTXFCR_CLR_MASK);
> +
> + to_or_from = priv->sf_addr + priv->cur_amba_base;
> +
> + while (len > 0) {
> + /* Default is page programming */
> + seqid = SEQID_PP;
> +#ifdef CONFIG_SPI_FLASH_BAR
> + if (priv->cur_seqid == FSPI_CMD_BRWR)
> + seqid = SEQID_BRWR;
> + else if (priv->cur_seqid == FSPI_CMD_WREAR)
> + seqid = SEQID_WREAR;
> +#endif
> +
> + fspi_write32(priv->flags, ®s->ipcr0, to_or_from);
> +
> + tx_size = (len > TX_BUFFER_SIZE) ?
> + TX_BUFFER_SIZE : len;
> +
> + to_or_from += tx_size;
> + len -= tx_size;
> +
> + size = tx_size / 8;
> + for (i = 0; i < size; i++) {
> + /* Wait for TXFIFO empty*/
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPTXWE_MASK))
> + ;
> +
> + memcpy(®s->tfdr, txbuf, 8);
> + txbuf += 8;
> + fspi_write32(priv->flags, ®s->intr,
> + FLEXSPI_INTR_IPTXWE_MASK);
> + }
> +
> + size = tx_size % 8;
> + if (size) {
> + /* Wait for TXFIFO empty*/
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPTXWE_MASK))
> + ;
> +
> + memcpy(®s->tfdr, txbuf, size);
> + fspi_write32(priv->flags, ®s->intr,
> + FLEXSPI_INTR_IPTXWE_MASK);
> + }
> +
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (seqid << FLEXSPI_IPCR1_SEQID_SHIFT) | tx_size);
> +
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + /* Wait for command done */
> + while (!(fspi_read32(priv->flags, ®s->intr) &
> + FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + /* invalid the TXFIFO first */
> + fspi_write32(priv->flags, ®s->iptxfcr,
> + FLEXSPI_IPTXFCR_CLR_MASK);
> + fspi_write32(priv->flags, ®s->intr,
> + FLEXSPI_INTR_IPCMDDONE_MASK);
> + }
> +}
> +
> +static void fspi_op_rdsr(struct fsl_fspi_priv *priv, void *rxbuf, u32
> +len) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + u32 data;
> +
> + /* invalid the RXFIFO first */
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> +
> + fspi_write32(priv->flags, ®s->ipcr0, priv->cur_amba_base);
> +
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_RDSR << FLEXSPI_IPCR1_SEQID_SHIFT) | len);
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + /* Wait for command done */
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + data = fspi_read32(priv->flags, ®s->rfdr[0]);
> + memcpy(rxbuf, &data, len);
> +
> + fspi_write32(priv->flags, ®s->intr, FLEXSPI_INTR_IPRXWA_MASK);
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK); }
> +
> +static void fspi_op_rdfsr(struct fsl_fspi_priv *priv, void *rxbuf, u32
> +len) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + u32 data;
> +
> + /* invalid the RXFIFO first */
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> +
> + fspi_write32(priv->flags, ®s->ipcr0, priv->cur_amba_base);
> +
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_RDFSR << FLEXSPI_IPCR1_SEQID_SHIFT) | len);
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + /* Wait for command done */
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + data = fspi_read32(priv->flags, ®s->rfdr[0]);
> + memcpy(rxbuf, &data, len);
> +
> + fspi_write32(priv->flags, ®s->intr, FLEXSPI_INTR_IPRXWA_MASK);
> + fspi_write32(priv->flags, ®s->iprxfcr, FLEXSPI_IPRXFCR_CLR_MASK);
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK); }
> +
> +static void fspi_op_erase(struct fsl_fspi_priv *priv) {
> + struct fsl_fspi_regs *regs = priv->regs;
> + u32 to_or_from = 0;
> +
> + to_or_from = priv->sf_addr + priv->cur_amba_base;
> +
> + fspi_write32(priv->flags, ®s->ipcr0, to_or_from);
> +
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_WREN << FLEXSPI_IPCR1_SEQID_SHIFT) | 0);
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK);
> +
> + if (priv->cur_seqid == FSPI_CMD_SE ||
> + priv->cur_seqid == FSPI_CMD_SE_4B) {
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_SE << FLEXSPI_IPCR1_SEQID_SHIFT) | 0);
> + } else if (priv->cur_seqid == FSPI_CMD_BE_4K ||
> + priv->cur_seqid == FSPI_CMD_BE_4K_4B) {
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_BE_4K << FLEXSPI_IPCR1_SEQID_SHIFT) | 0);
> + }
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK); }
> +
> +static void fspi_op_crfsr(struct fsl_fspi_priv *priv) {
> + struct fsl_fspi_regs *regs = priv->regs;
> +
> + /* invalid the TXFIFO first */
> + fspi_write32(priv->flags, ®s->iptxfcr, FLEXSPI_IPTXFCR_CLR_MASK);
> +
> + fspi_write32(priv->flags, ®s->ipcr0, priv->cur_amba_base);
> +
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_CRFSR << FLEXSPI_IPCR1_SEQID_SHIFT) | 0);
> +
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + /* Wait for command done */
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK); }
> +
> +static void fspi_op_enter_4bytes(struct fsl_fspi_priv *priv) {
> + struct fsl_fspi_regs *regs = priv->regs;
> +
> + /* invalid the TXFIFO first */
> + fspi_write32(priv->flags, ®s->iptxfcr, FLEXSPI_IPTXFCR_CLR_MASK);
> +
> + fspi_write32(priv->flags, ®s->ipcr0, priv->cur_amba_base);
> +
> + fspi_write32(priv->flags, ®s->ipcr1,
> + (SEQID_EN4B << FLEXSPI_IPCR1_SEQID_SHIFT) | 0);
> +
> + /* Trigger the command */
> + fspi_write32(priv->flags, ®s->ipcmd, 1);
> +
> + /* Wait for command done */
> + while (!(fspi_read32(priv->flags, ®s->intr)
> + & FLEXSPI_INTR_IPCMDDONE_MASK))
> + ;
> +
> + fspi_write32(priv->flags, ®s->intr,
> FLEXSPI_INTR_IPCMDDONE_MASK); }
> +
> +int fspi_xfer(struct fsl_fspi_priv *priv, unsigned int bitlen,
> + const void *dout, void *din, unsigned long flags) {
> + u32 bytes = DIV_ROUND_UP(bitlen, 8);
> + static u32 wr_sfaddr;
> + u32 txbuf = 0;
> +
> + if (dout) {
> + if (flags & SPI_XFER_BEGIN) {
> + priv->cur_seqid = *(u8 *)dout;
> + if (bytes > 1) {
> + int i, addr_bytes;
> +
> + if (FSL_FSPI_FLASH_SIZE <= SZ_16M)
> + addr_bytes = 3;
> + else
> +#ifdef CONFIG_SPI_FLASH_BAR
> + addr_bytes = 3;
> +#else
> + addr_bytes = 4;
> +#endif
> +
> + dout = (u8 *)dout + 1;
> + txbuf = *(u8 *)dout;
> + for (i = 1; i < addr_bytes; i++) {
> + txbuf <<= 8;
> + txbuf |= *(((u8 *)dout) + i);
> + }
> +
> + debug("seqid 0x%x addr 0x%x\n",
> + priv->cur_seqid, txbuf);
> + }
> + }
> +
> + if (flags == SPI_XFER_END) {
> + if (priv->cur_seqid == FSPI_CMD_WR_EVCR) {
> + fspi_op_wrevcr(priv, (u8 *)dout, bytes);
> + return 0;
> + } else if ((priv->cur_seqid == FSPI_CMD_SE) ||
> + (priv->cur_seqid == FSPI_CMD_BE_4K) ||
> + (priv->cur_seqid == FSPI_CMD_SE_4B) ||
> + (priv->cur_seqid == FSPI_CMD_BE_4K_4B)) {
> + int i;
> +
> + txbuf = *(u8 *)dout;
> + for (i = 1; i < bytes; i++) {
> + txbuf <<= 8;
> + txbuf |= *(((u8 *)dout) + i);
> + }
> +
> + priv->sf_addr = txbuf;
> + fspi_op_erase(priv);
> +#ifdef CONFIG_FSI_AHB
> + fspi_ahb_invalid(priv);
> +#endif
> + return 0;
> + }
> + priv->sf_addr = wr_sfaddr;
> + fspi_op_write(priv, (u8 *)dout, bytes);
> + return 0;
> + }
> +
> + if (priv->cur_seqid == FSPI_CMD_QUAD_OUTPUT ||
> + priv->cur_seqid == FSPI_CMD_FAST_READ ||
> + priv->cur_seqid == FSPI_CMD_FAST_READ_4B) {
> + priv->sf_addr = txbuf;
> + } else if (priv->cur_seqid == FSPI_CMD_PP ||
> + priv->cur_seqid == FSPI_CMD_PP_4B) {
> + wr_sfaddr = txbuf;
> + } else if (priv->cur_seqid == FSPI_CMD_WR_EVCR) {
> + wr_sfaddr = 0;
> + } else if ((priv->cur_seqid == FSPI_CMD_BRWR) ||
> + (priv->cur_seqid == FSPI_CMD_WREAR)) { #ifdef
> CONFIG_SPI_FLASH_BAR
> + wr_sfaddr = 0;
> +#endif
> + } else if (priv->cur_seqid == FSPI_CMD_EN4B) {
> + fspi_op_enter_4bytes(priv);
> + } else if (priv->cur_seqid == FSPI_CMD_CRFSR) {
> + fspi_op_crfsr(priv);
> + }
> + }
> +
> + if (din) {
> + if (priv->cur_seqid == FSPI_CMD_QUAD_OUTPUT ||
> + priv->cur_seqid == FSPI_CMD_FAST_READ ||
> + priv->cur_seqid == FSPI_CMD_FAST_READ_4B) { #ifdef
> CONFIG_FSI_AHB
> + fspi_ahb_read(priv, din, bytes);
> +#else
> + fspi_op_read(priv, din, bytes);
> +#endif
> + } else if (priv->cur_seqid == FSPI_CMD_RDID)
> + fspi_op_rdid(priv, din, bytes);
> + else if (priv->cur_seqid == FSPI_CMD_RDSR)
> + fspi_op_rdsr(priv, din, bytes);
> + else if (priv->cur_seqid == FSPI_CMD_RDFSR)
> + fspi_op_rdfsr(priv, din, bytes);
> + else if (priv->cur_seqid == FSPI_CMD_RD_EVCR)
> + fspi_op_rdevcr(priv, din, bytes);
> +#ifdef CONFIG_SPI_FLASH_BAR
> + else if (priv->cur_seqid == FSPI_CMD_BRRD ||
> + priv->cur_seqid == FSPI_CMD_RDEAR) {
> + priv->sf_addr = 0;
> + fspi_op_rdbank(priv, din, bytes);
> + }
> +#endif
> + }
> +
> +#ifdef CONFIG_FSI_AHB
> + if (priv->cur_seqid == FSPI_CMD_SE ||
> + priv->cur_seqid == FSPI_CMD_SE_4B ||
> + priv->cur_seqid == FSPI_CMD_PP ||
> + priv->cur_seqid == FSPI_CMD_PP_4B ||
> + priv->cur_seqid == FSPI_CMD_BE_4K ||
> + priv->cur_seqid == FSPI_CMD_BE_4K_4B ||
> + priv->cur_seqid == FSPI_CMD_WREAR ||
> + priv->cur_seqid == FSPI_CMD_BRWR)
> + fspi_ahb_invalid(priv);
> +#endif
> +
> + return 0;
> +}
> +
> +void fspi_module_disable(struct fsl_fspi_priv *priv, u8 disable) {
> + u32 mcr_val;
> +
> + mcr_val = fspi_read32(priv->flags, &priv->regs->mcr0);
> + if (disable)
> + mcr_val |= FLEXSPI_MCR0_MDIS_MASK;
> + else
> + mcr_val &= ~FLEXSPI_MCR0_MDIS_MASK;
> + fspi_write32(priv->flags, &priv->regs->mcr0, mcr_val); }
> +
> +__weak void init_clk_fspi(int index)
> +{
> +}
> +
> +static int fsl_fspi_child_pre_probe(struct udevice *dev) {
> + struct spi_slave *slave = dev_get_parent_priv(dev);
> +
> + slave->max_write_size = TX_BUFFER_SIZE;
> +
> +#ifdef CONFIG_FSPI_QUAD_SUPPORT
> + slave->mode |= SPI_RX_QUAD;
> +#endif
> +
> + return 0;
> +}
> +
> +static int fsl_fspi_probe(struct udevice *bus) {
> + u32 total_size;
> + struct fsl_fspi_platdata *plat = dev_get_platdata(bus);
> + struct fsl_fspi_priv *priv = dev_get_priv(bus);
> + struct dm_spi_bus *dm_spi_bus;
> +
> + if (CONFIG_IS_ENABLED(CLK)) {
> + /* Assigned clock already set clock */
> + struct clk fspi_clk;
> + int ret;
> +
> + ret = clk_get_by_name(bus, "fspi", &fspi_clk);
> + if (ret < 0) {
> + printf("Can't get fspi clk: %d\n", ret);
> + return ret;
> + }
> +
> + ret = clk_enable(&fspi_clk);
> + if (ret < 0) {
> + printf("Can't enable fspi clk: %d\n", ret);
> + return ret;
> + }
> + } else {
> + init_clk_fspi(bus->seq);
> + }
> + dm_spi_bus = bus->uclass_priv;
> +
> + dm_spi_bus->max_hz = plat->speed_hz;
> +
> + priv->regs = (struct fsl_fspi_regs *)(uintptr_t)plat->reg_base;
> + priv->flags = plat->flags;
> +
> + priv->speed_hz = plat->speed_hz;
> + priv->amba_base[0] = plat->amba_base;
> + priv->amba_total_size = plat->amba_total_size;
> + priv->flash_num = plat->flash_num;
> + priv->num_chipselect = plat->num_chipselect;
> +
> + fspi_write32(priv->flags, &priv->regs->mcr0,
> FLEXSPI_MCR0_SWRST_MASK);
> + do {
> + udelay(1);
> + } while (0x1 & fspi_read32(priv->flags, &priv->regs->mcr0));
> +
> + /* Disable the module */
> + fspi_module_disable(priv, 1);
> +
> + /* Enable the module and set to proper value*/ #ifdef
> +CONFIG_FSPI_DQS_LOOPBACK
> + fspi_write32(priv->flags, &priv->regs->mcr0, 0xFFFF0010); #else
> + fspi_write32(priv->flags, &priv->regs->mcr0, 0xFFFF0000); #endif
> +
> + /* Reset the DLL register to default value */
> + fspi_write32(priv->flags, &priv->regs->dllacr, 0x0100);
> + fspi_write32(priv->flags, &priv->regs->dllbcr, 0x0100);
> +
> + /* Flash Size in KByte */
> + total_size = FSL_FSPI_FLASH_SIZE * FSL_FSPI_FLASH_NUM >> 10;
> +
> + /*
> + * Any read access to non-implemented addresses will provide
> + * undefined results.
> + *
> + * In case single die flash devices, TOP_ADDR_MEMA2 and
> + * TOP_ADDR_MEMB2 should be initialized/programmed to
> + * TOP_ADDR_MEMA1 and TOP_ADDR_MEMB1 respectively - in effect,
> + * setting the size of these devices to 0. This would ensure
> + * that the complete memory map is assigned to only one flash device.
> + */
> +
> + fspi_write32(priv->flags, &priv->regs->flsha1cr0,
> + total_size);
> + fspi_write32(priv->flags, &priv->regs->flsha2cr0,
> + 0);
> + fspi_write32(priv->flags, &priv->regs->flshb1cr0,
> + 0);
> + fspi_write32(priv->flags, &priv->regs->flshb2cr0,
> + 0);
> +
> + fspi_set_lut(priv);
> +
> +#ifdef CONFIG_FSI_AHB
> + fspi_init_ahb_read(priv);
> +#endif
> +
> + fspi_module_disable(priv, 0);
> +
> + return 0;
> +}
> +
> +static int fsl_fspi_ofdata_to_platdata(struct udevice *bus) {
> + struct fdt_resource res_regs, res_mem;
> + struct fsl_fspi_platdata *plat = bus->platdata;
> + const void *blob = gd->fdt_blob;
> + int node = ofnode_to_offset(bus->node);
> + int ret, flash_num = 0, subnode;
> +
> + if (fdtdec_get_bool(blob, node, "big-endian"))
> + plat->flags |= FSPI_FLAG_REGMAP_ENDIAN_BIG;
> +
> + ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
> + "FlexSPI", &res_regs);
> + if (ret) {
> + debug("Error: can't get regs base addresses(ret = %d)!\n", ret);
> + return -ENOMEM;
> + }
> + ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
> + "FlexSPI-memory", &res_mem);
> + if (ret) {
> + debug("Error: can't get AMBA base addresses(ret = %d)!\n", ret);
> + return -ENOMEM;
> + }
> +
> + /* Count flash numbers */
> + fdt_for_each_subnode(subnode, blob, node)
> + ++flash_num;
> +
> + if (flash_num == 0) {
> + debug("Error: Missing flashes!\n");
> + return -ENODEV;
> + }
> +
> + plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
> + FSL_FSPI_DEFAULT_SCK_FREQ);
> + plat->num_chipselect = fdtdec_get_int(blob, node, "num-cs",
> + FSL_FSPI_MAX_CHIPSELECT_NUM);
> +
> + plat->reg_base = res_regs.start;
> + plat->amba_base = 0;
> + plat->amba_total_size = res_mem.end - res_mem.start + 1;
> + plat->flash_num = flash_num;
> +
> + debug("%s: regs=<0x%x> <0x%x, 0x%x>, max-frequency=%d,
> endianness=%s\n",
> + __func__, plat->reg_base, plat->amba_base,
> + plat->amba_total_size, plat->speed_hz,
> + plat->flags & FSPI_FLAG_REGMAP_ENDIAN_BIG ? "be" : "le");
> +
> + return 0;
> +}
> +
> +static int fsl_fspi_xfer(struct udevice *dev, unsigned int bitlen,
> + const void *dout, void *din, unsigned long flags) {
> + struct fsl_fspi_priv *priv;
> +
> + priv = dev_get_priv(dev->parent);
> +
> + return fspi_xfer(priv, bitlen, dout, din, flags); }
> +
> +static int fsl_fspi_claim_bus(struct udevice *dev) {
> + struct fsl_fspi_priv *priv;
> + struct udevice *bus;
> + struct dm_spi_slave_platdata *slave_plat =
> +dev_get_parent_platdata(dev);
> +
> + bus = dev->parent;
> + priv = dev_get_priv(bus);
> +
> + priv->cur_amba_base =
> + priv->amba_base[0] + FSL_FSPI_FLASH_SIZE * slave_plat->cs;
> +
> + return 0;
> +}
> +
> +static int fsl_fspi_release_bus(struct udevice *dev) {
> + return 0;
> +}
> +
> +static int fsl_fspi_set_speed(struct udevice *bus, uint speed) {
> + /* Nothing to do */
> + return 0;
> +}
> +
> +static int fsl_fspi_set_mode(struct udevice *bus, uint mode) {
> + /* Nothing to do */
> + return 0;
> +}
> +
> +static const struct dm_spi_ops fsl_fspi_ops = {
> + .claim_bus = fsl_fspi_claim_bus,
> + .release_bus = fsl_fspi_release_bus,
> + .xfer = fsl_fspi_xfer,
> + .set_speed = fsl_fspi_set_speed,
> + .set_mode = fsl_fspi_set_mode,
> +};
> +
> +static const struct udevice_id fsl_fspi_ids[] = {
> + { .compatible = "fsl,imx8qm-flexspi" },
> + { .compatible = "fsl,imx8qxp-flexspi" },
> + { .compatible = "fsl,imx8mm-flexspi" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(fsl_fspi) = {
> + .name = "fsl_fspi",
> + .id = UCLASS_SPI,
> + .of_match = fsl_fspi_ids,
> + .ops = &fsl_fspi_ops,
> + .ofdata_to_platdata = fsl_fspi_ofdata_to_platdata,
> + .platdata_auto_alloc_size = sizeof(struct fsl_fspi_platdata),
> + .priv_auto_alloc_size = sizeof(struct fsl_fspi_priv),
> + .probe = fsl_fspi_probe,
> + .child_pre_probe = fsl_fspi_child_pre_probe, };
> diff --git a/drivers/spi/fsl_fspi.h b/drivers/spi/fsl_fspi.h new file mode 100644
> index 0000000000..bff13b9bd8
> --- /dev/null
> +++ b/drivers/spi/fsl_fspi.h
> @@ -0,0 +1,170 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2019 NXP
> + *
> + * Register definitions for NXP FLEXSPI */
> +
> +#ifndef _FSL_FSPI_H_
> +#define _FSL_FSPI_H_
> +
> +#include <linux/bitops.h>
> +
> +struct fsl_fspi_regs {
> + u32 mcr0;
> + u32 mcr1;
> + u32 mcr2;
> + u32 ahbcr;
> + u32 inten;
> + u32 intr;
> + u32 lutkey;
> + u32 lutcr;
> + u32 ahbrxbuf0cr0;
> + u32 ahbrxbuf1cr0;
> + u32 ahbrxbuf2cr0;
> + u32 ahbrxbuf3cr0;
> + u32 ahbrxbuf4cr0;
> + u32 ahbrxbuf5cr0;
> + u32 ahbrxbuf6cr0;
> + u32 ahbrxbuf7cr0;
> + u32 ahbrxbuf0cr1;
> + u32 ahbrxbuf1cr1;
> + u32 ahbrxbuf2cr1;
> + u32 ahbrxbuf3cr1;
> + u32 ahbrxbuf4cr1;
> + u32 ahbrxbuf5cr1;
> + u32 ahbrxbuf6cr1;
> + u32 ahbrxbuf7cr1;
> + u32 flsha1cr0;
> + u32 flsha2cr0;
> + u32 flshb1cr0;
> + u32 flshb2cr0;
> + u32 flsha1cr1;
> + u32 flsha2cr1;
> + u32 flshb1cr1;
> + u32 flshb2cr1;
> + u32 flsha1cr2;
> + u32 flsha2cr2;
> + u32 flshb1cr2;
> + u32 flshb2cr2;
> + u32 flshcr3;
> + u32 flshcr4;
> + u32 flshcr5;
> + u32 flshcr6;
> + u32 ipcr0;
> + u32 ipcr1;
> + u32 ipcr2;
> + u32 ipcr3;
> + u32 ipcmd;
> + u32 dlpr;
> + u32 iprxfcr;
> + u32 iptxfcr;
> + u32 dllacr;
> + u32 dllbcr;
> + u32 soccr;
> + u32 misccr2;
> + u32 misccr3;
> + u32 misccr4;
> + u32 misccr5;
> + u32 misccr6;
> + u32 sts0;
> + u32 sts1;
> + u32 sts2;
> + u32 ahbspndsts;
> + u32 iprxfsts;
> + u32 iptxfsts;
> + u32 rsvd[2];
> + u32 rfdr[32];
> + u32 tfdr[32];
> + u32 lut[128];
> +};
> +
> +/* The registers */
> +#define FLEXSPI_MCR0_MDIS_SHIFT 1
> +#define FLEXSPI_MCR0_MDIS_MASK BIT(1)
> +#define FLEXSPI_MCR0_SWRST_SHIFT 0
> +#define FLEXSPI_MCR0_SWRST_MASK BIT(0)
> +
> +#define FLEXSPI_AHBCR_PREF_EN_SHIFT 5
> +#define FLEXSPI_AHBCR_PREF_EN_MASK BIT(5)
> +
> +#define FLEXSPI_INTR_IPTXWE_SHIFT 6
> +#define FLEXSPI_INTR_IPTXWE_MASK BIT(6)
> +#define FLEXSPI_INTR_IPRXWA_SHIFT 5
> +#define FLEXSPI_INTR_IPRXWA_MASK BIT(5)
> +#define FLEXSPI_INTR_IPCMDDONE_SHIFT 0
> +#define FLEXSPI_INTR_IPCMDDONE_MASK BIT(0)
> +
> +#define FLEXSPI_LUTKEY_VALUE 0x5AF05AF0
> +
> +#define FLEXSPI_LCKER_LOCK 0x1
> +#define FLEXSPI_LCKER_UNLOCK 0x2
> +
> +#define FLEXSPI_BUFXCR_INVALID_MSTRID 0xe
> +#define FLEXSPI_AHBRXBUF0CR7_PREF_SHIFT 31
> +#define FLEXSPI_AHBRXBUF0CR7_PREF_MASK BIT(31)
> +
> +#define FLEXSPI_IPCR1_SEQID_SHIFT 16
> +
> +#define FLEXSPI_IPRXFCR_CLR_SHIFT 0
> +#define FLEXSPI_IPRXFCR_CLR_MASK BIT(0)
> +
> +#define FLEXSPI_IPTXFCR_CLR_SHIFT 0
> +#define FLEXSPI_IPTXFCR_CLR_MASK BIT(0)
> +
> +#define FLEXSPI_IPRXFSTS_FILL_SHIFT 0
> +#define FLEXSPI_IPRXFSTS_FILL_MASK (0xFF <<
> FLEXSPI_IPRXFSTS_FILL_SHIFT)
> +
> +/* register map end */
> +
> +#define OPRND0_SHIFT 0
> +#define OPRND0(x) ((x) << OPRND0_SHIFT)
> +#define PAD0_SHIFT 8
> +#define PAD0(x) ((x) << PAD0_SHIFT)
> +#define INSTR0_SHIFT 10
> +#define INSTR0(x) ((x) << INSTR0_SHIFT)
> +#define OPRND1_SHIFT 16
> +#define OPRND1(x) ((x) << OPRND1_SHIFT)
> +#define PAD1_SHIFT 24
> +#define PAD1(x) ((x) << PAD1_SHIFT)
> +#define INSTR1_SHIFT 26
> +#define INSTR1(x) ((x) << INSTR1_SHIFT)
> +
> +#define LUT_STOP 0x00
> +#define LUT_CMD 0x01
> +#define LUT_ADDR 0x02
> +#define LUT_CADDR_SDR 0x03
> +#define LUT_MODE 0x04
> +#define LUT_MODE2 0x05
> +#define LUT_MODE4 0x06
> +#define LUT_MODE8 0x07
> +#define LUT_WRITE 0x08
> +#define LUT_READ 0x09
> +#define LUT_LEARN_SDR 0x0A
> +#define LUT_DATSZ_SDR 0x0B
> +#define LUT_DUMMY 0x0C
> +#define LUT_DUMMY_RWDS_SDR 0x0D
> +#define LUT_JMP_ON_CS 0x1F
> +#define LUT_CMD_DDR 0x21
> +#define LUT_ADDR_DDR 0x22
> +#define LUT_CADDR_DDR 0x23
> +#define LUT_MODE_DDR 0x24
> +#define LUT_MODE2_DDR 0x25
> +#define LUT_MODE4_DDR 0x26
> +#define LUT_MODE8_DDR 0x27
> +#define LUT_WRITE_DDR 0x28
> +#define LUT_READ_DDR 0x29
> +#define LUT_LEARN_DDR 0x2A
> +#define LUT_DATSZ_DDR 0x2B
> +#define LUT_DUMMY_DDR 0x2C
> +#define LUT_DUMMY_RWDS_DDR 0x2D
> +
> +#define LUT_PAD1 0
> +#define LUT_PAD2 1
> +#define LUT_PAD4 2
> +#define LUT_PAD8 3
> +
> +#define ADDR24BIT 0x18
> +#define ADDR32BIT 0x20
> +
> +#endif /* _FSL_FSPI_H_ */
> --
> 2.16.4
More information about the U-Boot
mailing list