[U-Boot] [PATCH 2/2] ARM: imx6q_logic: Enable DM_SERIAL

[Adam Ford]

On Wed, Aug 7, 2019 at 11:39 AM Fabio Estevam <festevam at gmail.com> wrote:
>
> On Wed, Aug 7, 2019 at 1:36 PM Adam Ford <aford173 at gmail.com> wrote:
> >
> > With spl_early_init() now enabled in board_init_f, the
> > preloader_console_init() function can correctly initialize the
> > serial port based on the device tree during SPL.
> > This patch enables DM_SERIAL in both U-Boot and SPL.
> >
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> >
> > diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig
> > index b95c9783a4..2c77b9c218 100644
> > --- a/configs/imx6q_logic_defconfig
> > +++ b/configs/imx6q_logic_defconfig
> > @@ -4,7 +4,6 @@ CONFIG_SYS_TEXT_BASE=0x17800000
> >  CONFIG_SPL_GPIO_SUPPORT=y
> >  CONFIG_SPL_LIBCOMMON_SUPPORT=y
> >  CONFIG_SPL_LIBGENERIC_SUPPORT=y
> > -CONFIG_SYS_MALLOC_F_LEN=0x2000
>
> Unrelated change?

It appears to be an artifact of the make savedefconfig.  Newer updates
make CONFIG_SYS_MALLOC_F_LEN=0x2000 by default, so savedefconfig just
removed it.
I will do a V2 patch serial splitting the first patch into two
separate parts, then I'll remove this artifact from the 2nd patch.

adam