[U-Boot] [PATCH] i2c: mxc: add CONFIG_CLK support

[Peng Fan]

Hi Schrempf,

> Subject: Re: [U-Boot] [PATCH] i2c: mxc: add CONFIG_CLK support
> 
> Hi Peng,
> 
> On 06.08.19 12:09, Peng Fan wrote:
> > When CONFIG_CLK enabled, use CLK UCLASS for clk related settings.
> >
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > ---
> >   arch/arm/include/asm/mach-imx/mxc_i2c.h |  6 ++++++
> >   drivers/i2c/mxc_i2c.c                   | 17 +++++++++++++++++
> >   2 files changed, 23 insertions(+)
> >
> > diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h
> > b/arch/arm/include/asm/mach-imx/mxc_i2c.h
> > index 8e1ea9af19..81fd981444 100644
> > --- a/arch/arm/include/asm/mach-imx/mxc_i2c.h
> > +++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h
> > @@ -6,6 +6,9 @@
> >   #define __ASM_ARCH_MXC_MXC_I2C_H__
> >   #include <asm-generic/gpio.h>
> >   #include <asm/mach-imx/iomux-v3.h>
> > +#if CONFIG_IS_ENABLED(CLK)
> > +#include <clk.h>
> > +#endif
> >
> >   struct i2c_pin_ctrl {
> >   	iomux_v3_cfg_t i2c_mode;
> > @@ -47,6 +50,9 @@ struct mxc_i2c_bus {
> >   	ulong driver_data;
> >   	int speed;
> >   	struct i2c_pads_info *pads_info;
> > +#if CONFIG_IS_ENABLED(CLK)
> > +	struct clk per_clk;
> > +#endif
> >   #ifndef CONFIG_DM_I2C
> >   	int (*idle_bus_fn)(void *p);
> >   	void *idle_bus_data;
> > diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index
> > 23119cce65..2e157bca58 100644
> > --- a/drivers/i2c/mxc_i2c.c
> > +++ b/drivers/i2c/mxc_i2c.c
> 
> I already commented on a previous version of this patch and the following
> change is still missing here:

Thanks, I forgot to addressed your comments. Sent out v2, please help review.

Thanks,
Peng.

> 
> @@ -149,7 +149,11 @@ static uint8_t i2c_imx_get_clk(struct mxc_i2c_bus
> *i2c_bus, unsigned int rate)
>   #endif
> 
>          /* Divider value calculation */
> +#if CONFIG_IS_ENABLED(CLK)
> +       i2c_clk_rate = clk_get_rate(&i2c_bus->per_clk); #else
>          i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK);
> +#endif
>          div = (i2c_clk_rate + rate - 1) / rate;
>          if (div < i2c_clk_div[0][0])
>                  clk_div = 0;
> 
> Regards,
> Frieder
> 
> > @@ -890,9 +890,22 @@ static int mxc_i2c_probe(struct udevice *bus)
> >   	i2c_bus->bus = bus;
> >
> >   	/* Enable clk */
> > +#if CONFIG_IS_ENABLED(CLK)
> > +	ret = clk_get_by_index(bus, 0, &i2c_bus->per_clk);
> > +	if (ret) {
> > +		printf("Failed to get i2c clk\n");
> > +		return ret;
> > +	}
> > +	ret = clk_enable(&i2c_bus->per_clk);
> > +	if (ret) {
> > +		printf("Failed to enable i2c clk\n");
> > +		return ret;
> > +	}
> > +#else
> >   	ret = enable_i2c_clk(1, bus->seq);
> >   	if (ret < 0)
> >   		return ret;
> > +#endif
> >
> >   	/*
> >   	 * See Documentation/devicetree/bindings/i2c/i2c-imx.txt
> > @@ -919,7 +932,11 @@ static int mxc_i2c_probe(struct udevice *bus)
> >   	ret = i2c_idle_bus(i2c_bus);
> >   	if (ret < 0) {
> >   		/* Disable clk */
> > +#if CONFIG_IS_ENABLED(CLK)
> > +		clk_disable(&i2c_bus->per_clk);
> > +#else
> >   		enable_i2c_clk(0, bus->seq);
> > +#endif
> >   		return ret;
> >   	}
> >
> >