[U-Boot] [PATCH v2 02/11] imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update

[Peng Fan]

> Subject: [PATCH v2 02/11] imx: tpc70: config: Update TPC70 config to support
> eMMC's boot0 SPL update
> 
> The TPC70 can boot from eMMC's boot0. This patch allows it to update this
> HW partition's SPL.
> 
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> ---
> 
>  include/configs/kp_imx6q_tpc.h | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h
> index 92f2bbb75b..2d1d1203b5 100644
> --- a/include/configs/kp_imx6q_tpc.h
> +++ b/include/configs/kp_imx6q_tpc.h
> @@ -43,6 +43,7 @@
>  #define CONFIG_SYS_FSL_ESDHC_ADDR	0
>  #define CONFIG_SYS_FSL_USDHC_NUM	2
>  #define CONFIG_SYS_MMC_ENV_DEV		1 /* 0 = SDHC2, 1 = SDHC4
> (eMMC) */
> +#define CONFIG_SUPPORT_EMMC_BOOT
> 
>  /* UART */
>  #define CONFIG_MXC_UART
> @@ -103,6 +104,10 @@
>  	       "setexpr blkc ${blkc} + 1;" \
>  	       "mmc write ${loadaddr} 0x2 ${blkc};" \
>  	    "fi;\0" \
> +	"upd_SPL_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_SPL_sd\0" \
> +	"upd_uboot_mmc=mmc dev 1; mmc partconf 1 0 1 1; run
> upd_uboot_sd\0" \
> +	"up_mmc=run upd_SPL_mmc; run upd_uboot_mmc\0" \
> +	"up_sd=run upd_SPL_sd; run upd_uboot_sd\0" \
>  	"upd_wic=" \
>  	    "if tftp ${loadaddr} ${wic_file}; then " \
>  	       "setexpr blkc ${filesize} / 0x200;" \

Reviewed-by: Peng Fan <peng.fan at nxp.com>

> --
> 2.11.0