[U-Boot] [PATCH V2 05/10] dt: bcm63158: Add hsspi controller

[Philippe Reynes]

From: Kursad Oney <kursad.oney at broadcom.com>

This change adds the hsspi controller to the 63158 dtsi.

Signed-off-by: Kursad Oney <kursad.oney at broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes at softathome.com>
---
 arch/arm/dts/bcm63158.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

Changelog:
v2:
- no change

diff --git a/arch/arm/dts/bcm63158.dtsi b/arch/arm/dts/bcm63158.dtsi
index 175af38..7dd2858 100644
--- a/arch/arm/dts/bcm63158.dtsi
+++ b/arch/arm/dts/bcm63158.dtsi
@@ -10,6 +10,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		spi0 = &hsspi;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -67,6 +71,14 @@
 			u-boot,dm-pre-reloc;
 		};
 
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_osc>;
+			clock-mult = <2>;
+			clock-div = <1>;
+		};
+
 		refclk50mhz: refclk50mhz {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -192,6 +204,19 @@
 			status = "disabled";
 		};
 
+		hsspi: spi-controller at ff801000 {
+			compatible = "brcm,bcm6328-hsspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0xff801000 0x0 0x600>;
+			clocks = <&hsspi_pll>, <&hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			spi-max-frequency = <100000000>;
+			num-cs = <8>;
+
+			status = "disabled";
+		};
+
 		nand: nand-controller at ff801800 {
 			compatible = "brcm,nand-bcm63158",
 				     "brcm,brcmnand-v5.0",
-- 
2.7.4