[U-Boot] [PATCH] ARM: aspeed: Add SD host controller driver
Cédric Le Goater
clg at kaod.org
Tue Aug 13 16:55:41 UTC 2019
On 13/08/2019 08:41, Peng Fan wrote:
>> Subject: [U-Boot][PATCH] ARM: aspeed: Add SD host controller driver
>>
>> Add support for the Aspeed SD host controller engine. This involves adding an
>> MMC SDHCI driver and various additions to the clock and reset drivers for
>> Aspeed chips.
>>
>> Signed-off-by: Eddie James <eajames at linux.ibm.com>
>> ---
>> arch/arm/include/asm/arch-aspeed/scu_ast2500.h | 3 +
>> arch/arm/include/asm/gpio.h | 3 +-
>> arch/arm/mach-aspeed/ast2500-board.c | 3 +
>> drivers/clk/aspeed/clk_ast2500.c | 27 +++++++++
>> drivers/mmc/Kconfig | 11 ++++
>> drivers/mmc/Makefile | 1 +
>> drivers/mmc/aspeed_sdhci.c | 78
>
> Please split the patch.
yes. a clock patch, a driver patch, a board integration patch at least,
with some DT addons for the EVB.
Don't we want to sync up the DT from Linux also ?
Thanks,
C.
>
> Thanks,
> Peng.
>
>> ++++++++++++++++++++++++++
>> drivers/pinctrl/aspeed/pinctrl_ast2500.c | 2 +
>> 8 files changed, 127 insertions(+), 1 deletion(-) create mode 100644
>> drivers/mmc/aspeed_sdhci.c
>>
>> diff --git a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
>> b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
>> index 4988ced..8db4901 100644
>> --- a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
>> +++ b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
>> @@ -22,6 +22,8 @@
>> #define SCU_MPLL_POST_MASK (0x3f << SCU_MPLL_POST_SHIFT)
>> #define SCU_PCLK_DIV_SHIFT 23
>> #define SCU_PCLK_DIV_MASK (7 << SCU_PCLK_DIV_SHIFT)
>> +#define SCU_SDCLK_DIV_SHIFT 12
>> +#define SCU_SDCLK_DIV_MASK (7 << SCU_SDCLK_DIV_SHIFT)
>> #define SCU_HPLL_DENUM_SHIFT 0
>> #define SCU_HPLL_DENUM_MASK 0x1f
>> #define SCU_HPLL_NUM_SHIFT 5
>> @@ -107,6 +109,7 @@
>>
>> #define SCU_CLKSTOP_MAC1 (1 << 20)
>> #define SCU_CLKSTOP_MAC2 (1 << 21)
>> +#define SCU_CLKSTOP_SDCLK (1 << 27)
>>
>> #define SCU_D2PLL_EXT1_OFF (1 << 0)
>> #define SCU_D2PLL_EXT1_BYPASS (1 << 1)
>> diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
>> index 370031f..38a5922 100644
>> --- a/arch/arm/include/asm/gpio.h
>> +++ b/arch/arm/include/asm/gpio.h
>> @@ -1,6 +1,7 @@
>> #if !defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARCH_STI) &&
>> \
>> !defined(CONFIG_ARCH_K3) && !defined(CONFIG_ARCH_BCM6858) &&
>> \
>> - !defined(CONFIG_ARCH_BCM63158)
>> && !defined(CONFIG_ARCH_ROCKCHIP)
>> + !defined(CONFIG_ARCH_BCM63158)
>> && !defined(CONFIG_ARCH_ROCKCHIP) && \
>> + !defined(CONFIG_ARCH_ASPEED)
>> #include <asm/arch/gpio.h>
>> #endif
>> #include <asm-generic/gpio.h>
>> diff --git a/arch/arm/mach-aspeed/ast2500-board.c
>> b/arch/arm/mach-aspeed/ast2500-board.c
>> index e7edd54..52a4e05 100644
>> --- a/arch/arm/mach-aspeed/ast2500-board.c
>> +++ b/arch/arm/mach-aspeed/ast2500-board.c
>> @@ -4,6 +4,7 @@
>> */
>> #include <common.h>
>> #include <dm.h>
>> +#include <mmc.h>
>> #include <ram.h>
>> #include <timer.h>
>> #include <asm/io.h>
>> @@ -55,6 +56,8 @@ int board_init(void)
>> {
>> gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
>>
>> + mmc_initialize(gd->bd);
>> +
>> return 0;
>> }
>>
>> diff --git a/drivers/clk/aspeed/clk_ast2500.c
>> b/drivers/clk/aspeed/clk_ast2500.c
>> index dbee13a..9249cf9 100644
>> --- a/drivers/clk/aspeed/clk_ast2500.c
>> +++ b/drivers/clk/aspeed/clk_ast2500.c
>> @@ -143,6 +143,17 @@ static ulong ast2500_clk_get_rate(struct clk *clk)
>> rate = rate / apb_div;
>> }
>> break;
>> + case BCLK_SDCLK:
>> + {
>> + ulong apb_div = 4 + 4 * ((readl(&priv->scu->clk_sel1)
>> + & SCU_SDCLK_DIV_MASK)
>> + >> SCU_SDCLK_DIV_SHIFT);
>> + rate = ast2500_get_hpll_rate(clkin,
>> + readl(&priv->
>> + scu->h_pll_param));
>> + rate = rate / apb_div;
>> + }
>> + break;
>> case PCLK_UART1:
>> rate = ast2500_get_uart_clk_rate(priv->scu, 1);
>> break;
>> @@ -436,6 +447,22 @@ static int ast2500_clk_enable(struct clk *clk)
>> struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
>>
>> switch (clk->id) {
>> + case BCLK_SDCLK:
>> + if (readl(&priv->scu->clk_stop_ctrl1) & SCU_CLKSTOP_SDCLK) {
>> + ast_scu_unlock(priv->scu);
>> +
>> + setbits_le32(&priv->scu->sysreset_ctrl1,
>> + SCU_SYSRESET_SDIO);
>> + udelay(100);
>> + clrbits_le32(&priv->scu->clk_stop_ctrl1,
>> + SCU_CLKSTOP_SDCLK);
>> + mdelay(10);
>> + clrbits_le32(&priv->scu->sysreset_ctrl1,
>> + SCU_SYSRESET_SDIO);
>> +
>> + ast_scu_lock(priv->scu);
>> + }
>> + break;
>> /*
>> * For MAC clocks the clock rate is
>> * configured based on whether RGMII or RMII mode has been selected
>> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index
>> c6812f6..536f66a 100644
>> --- a/drivers/mmc/Kconfig
>> +++ b/drivers/mmc/Kconfig
>> @@ -421,6 +421,17 @@ config SPL_MMC_SDHCI_ADMA
>> This enables support for the ADMA (Advanced DMA) defined
>> in the SD Host Controller Standard Specification Version 3.00 in SPL.
>>
>> +config MMC_SDHCI_ASPEED
>> + bool "Aspeed SDHCI controller"
>> + depends on ARCH_ASPEED
>> + depends on DM_MMC
>> + depends on MMC_SDHCI
>> + help
>> + Enables support for the Aspeed SDHCI 2.0 controller present on
>> Aspeed
>> + SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
>> + specifications. On the AST2600, the device is also compatible with
>> + MMC 5.1 and eMMC 3.0.
>> +
>> config MMC_SDHCI_ATMEL
>> bool "Atmel SDHCI controller support"
>> depends on ARCH_AT91
>> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index
>> 6cc018b..5594195 100644
>> --- a/drivers/mmc/Makefile
>> +++ b/drivers/mmc/Makefile
>> @@ -46,6 +46,7 @@ obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o
>>
>> # SDHCI
>> obj-$(CONFIG_MMC_SDHCI) += sdhci.o
>> +obj-$(CONFIG_MMC_SDHCI_ASPEED) += aspeed_sdhci.o
>> obj-$(CONFIG_MMC_SDHCI_ATMEL) += atmel_sdhci.o
>> obj-$(CONFIG_MMC_SDHCI_BCM2835) += bcm2835_sdhci.o
>> obj-$(CONFIG_MMC_SDHCI_BCMSTB) += bcmstb_sdhci.o
>> diff --git a/drivers/mmc/aspeed_sdhci.c b/drivers/mmc/aspeed_sdhci.c new
>> file mode 100644 index 0000000..c292c42
>> --- /dev/null
>> +++ b/drivers/mmc/aspeed_sdhci.c
>> @@ -0,0 +1,78 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright 2019 IBM Corp.
>> + * Eddie James <eajames at linux.ibm.com>
>> + */
>> +
>> +#include <common.h>
>> +#include <clk.h>
>> +#include <dm.h>
>> +#include <malloc.h>
>> +#include <sdhci.h>
>> +
>> +struct aspeed_sdhci_plat {
>> + struct mmc_config cfg;
>> + struct mmc mmc;
>> +};
>> +
>> +static int aspeed_sdhci_probe(struct udevice *dev) {
>> + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
>> + struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
>> + struct sdhci_host *host = dev_get_priv(dev);
>> + u32 max_clk;
>> + struct clk clk;
>> + int ret;
>> +
>> + ret = clk_get_by_index(dev, 0, &clk);
>> + if (ret)
>> + return ret;
>> +
>> + ret = clk_enable(&clk);
>> + if (ret)
>> + return ret;
>> +
>> + host->name = dev->name;
>> + host->ioaddr = (void *)devfdt_get_addr(dev);
>> +
>> + max_clk = clk_get_rate(&clk);
>> + if (!max_clk)
>> + return -EINVAL;
>> +
>> + host->max_clk = max_clk;
>> + host->mmc = &plat->mmc;
>> + host->mmc->dev = dev;
>> + host->mmc->priv = host;
>> + upriv->mmc = host->mmc;
>> +
>> + ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
>> + if (ret)
>> + return ret;
>> +
>> + return sdhci_probe(dev);
>> +}
>> +
>> +static int aspeed_sdhci_bind(struct udevice *dev) {
>> + struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
>> +
>> + return sdhci_bind(dev, &plat->mmc, &plat->cfg); }
>> +
>> +static const struct udevice_id aspeed_sdhci_ids[] = {
>> + { .compatible = "aspeed,ast2400-sdhci" },
>> + { .compatible = "aspeed,ast2500-sdhci" },
>> + { .compatible = "aspeed,ast2600-sdhci" },
>> + { }
>> +};
>> +
>> +U_BOOT_DRIVER(aspeed_sdhci_drv) = {
>> + .name = "aspeed_sdhci",
>> + .id = UCLASS_MMC,
>> + .of_match = aspeed_sdhci_ids,
>> + .ops = &sdhci_ops,
>> + .bind = aspeed_sdhci_bind,
>> + .probe = aspeed_sdhci_probe,
>> + .priv_auto_alloc_size = sizeof(struct sdhci_host),
>> + .platdata_auto_alloc_size = sizeof(struct aspeed_sdhci_plat), };
>> diff --git a/drivers/pinctrl/aspeed/pinctrl_ast2500.c
>> b/drivers/pinctrl/aspeed/pinctrl_ast2500.c
>> index ed333b9..a6e9c0d 100644
>> --- a/drivers/pinctrl/aspeed/pinctrl_ast2500.c
>> +++ b/drivers/pinctrl/aspeed/pinctrl_ast2500.c
>> @@ -58,6 +58,8 @@ static const struct ast2500_group_config
>> ast2500_groups[] = {
>> { "MDIO1", 3, (1 << 31) | (1 << 30) },
>> { "MAC2LINK", 1, (1 << 1) },
>> { "MDIO2", 5, (1 << 2) },
>> + { "SD1", 5, (1 << 0) },
>> + { "SD2", 5, (1 << 1) },
>> };
>>
>> static int ast2500_pinctrl_get_groups_count(struct udevice *dev)
>> --
>> 1.8.3.1
>
More information about the U-Boot
mailing list