[U-Boot] [PATCH 3/6] bmips: bcm6328: add support for brcmnand

[Álvaro Fernández Rojas]

BCM6328 uses old 2.2 HW nand controller, which isn't currently supported by
brcmnand driver.

Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
 arch/mips/dts/brcm,bcm6328.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/mips/dts/brcm,bcm6328.dtsi b/arch/mips/dts/brcm,bcm6328.dtsi
index 50beed4171..350c0e903b 100644
--- a/arch/mips/dts/brcm,bcm6328.dtsi
+++ b/arch/mips/dts/brcm,bcm6328.dtsi
@@ -124,6 +124,22 @@
 			status = "disabled";
 		};
 
+		nand: nand-controller at 10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm6368",
+				     "brcm,brcmnand-v2.2",
+				     "brcm,brcmnand";
+			reg-names = "nand",
+				    "nand-cache",
+				    "nand-int-base";
+			reg = <0x10000200 0x180>,
+			      <0x10000400 0x200>,
+			      <0x100000b0 0x10>;
+
+			status = "disabled";
+		};
+
 		leds: led-controller at 10000800 {
 			compatible = "brcm,bcm6328-leds";
 			reg = <0x10000800 0x24>;
-- 
2.20.1