[U-Boot] [PATCH 4/6] spi: fsl_qspi: Update to use driver data
Ye Li
ye.li at nxp.com
Wed Aug 14 10:09:07 UTC 2019
Add the driver data for each compatible string. So we can remove the
SOC config and use driver data instead.
Signed-off-by: Ye Li <ye.li at nxp.com>
---
drivers/spi/fsl_qspi.c | 113 ++++++++++++++++++++++++++++++++++---------------
1 file changed, 79 insertions(+), 34 deletions(-)
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
index 21c2bf5..8950412 100644
--- a/drivers/spi/fsl_qspi.c
+++ b/drivers/spi/fsl_qspi.c
@@ -19,14 +19,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#define RX_BUFFER_SIZE 0x80
-#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
- defined(CONFIG_MX6ULL) || defined(CONFIG_MX7D)
-#define TX_BUFFER_SIZE 0x200
-#else
-#define TX_BUFFER_SIZE 0x40
-#endif
-
#define OFFSET_BITS_MASK GENMASK(23, 0)
#define FLASH_STATUS_WEL 0x02
@@ -85,6 +77,23 @@ DECLARE_GLOBAL_DATA_PTR;
/* QSPI max chipselect signals number */
#define FSL_QSPI_MAX_CHIPSELECT_NUM 4
+/* Controller needs driver to swap endian */
+#define QUADSPI_QUIRK_SWAP_ENDIAN BIT(0)
+
+enum fsl_qspi_devtype {
+ FSL_QUADSPI_VYBRID,
+ FSL_QUADSPI_IMX6SX,
+ FSL_QUADSPI_IMX6UL_7D,
+};
+
+struct fsl_qspi_devtype_data {
+ enum fsl_qspi_devtype devtype;
+ u32 rxfifo;
+ u32 txfifo;
+ u32 ahb_buf_size;
+ u32 driver_data;
+};
+
/**
* struct fsl_qspi_platdata - platform data for Freescale QSPI
*
@@ -133,8 +142,32 @@ struct fsl_qspi_priv {
u32 flash_num;
u32 num_chipselect;
struct fsl_qspi_regs *regs;
+ struct fsl_qspi_devtype_data *devtype_data;
};
+static const struct fsl_qspi_devtype_data vybrid_data = {
+ .devtype = FSL_QUADSPI_VYBRID,
+ .rxfifo = 128,
+ .txfifo = 64,
+ .ahb_buf_size = 1024,
+ .driver_data = QUADSPI_QUIRK_SWAP_ENDIAN,
+};
+
+static const struct fsl_qspi_devtype_data imx6sx_data = {
+ .devtype = FSL_QUADSPI_IMX6SX,
+ .rxfifo = 128,
+ .txfifo = 512,
+ .ahb_buf_size = 1024,
+ .driver_data = 0,
+};
+
+static const struct fsl_qspi_devtype_data imx6ul_7d_data = {
+ .devtype = FSL_QUADSPI_IMX6UL_7D,
+ .rxfifo = 128,
+ .txfifo = 512,
+ .ahb_buf_size = 1024,
+ .driver_data = 0,
+};
static u32 qspi_read32(u32 flags, u32 *addr)
{
@@ -162,13 +195,12 @@ static inline int is_controller_busy(const struct fsl_qspi_priv *priv)
/* QSPI support swapping the flash read/write data
* in hardware for LS102xA, but not for VF610 */
-static inline u32 qspi_endian_xchg(u32 data)
+static inline u32 qspi_endian_xchg(struct fsl_qspi_priv *priv, u32 data)
{
-#ifdef CONFIG_VF610
- return swab32(data);
-#else
- return data;
-#endif
+ if (priv->devtype_data->driver_data & QUADSPI_QUIRK_SWAP_ENDIAN)
+ return swab32(data);
+ else
+ return data;
}
static void qspi_set_lut(struct fsl_qspi_priv *priv)
@@ -210,7 +242,7 @@ static void qspi_set_lut(struct fsl_qspi_priv *priv)
#endif
qspi_write32(priv->flags, ®s->lut[lut_base + 1],
OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) |
- OPRND1(RX_BUFFER_SIZE) | PAD1(LUT_PAD1) |
+ OPRND1(priv->devtype_data->rxfifo) | PAD1(LUT_PAD1) |
INSTR1(LUT_READ));
qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
@@ -417,7 +449,6 @@ static void qspi_enable_ddr_mode(struct fsl_qspi_priv *priv)
reg |= QSPI_MCR_DDR_EN_MASK;
/* Enable bit 29 for imx6sx */
reg |= BIT(29);
-
qspi_write32(priv->flags, ®s->mcr, reg);
/* Enable the TDH to 1 for some platforms like imx6ul, imx7d, etc
@@ -451,7 +482,7 @@ static void qspi_init_ahb_read(struct fsl_qspi_priv *priv)
qspi_write32(priv->flags, ®s->buf1cr, QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(priv->flags, ®s->buf2cr, QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(priv->flags, ®s->buf3cr, QSPI_BUF3CR_ALLMST_MASK |
- (0x80 << QSPI_BUF3CR_ADATSZ_SHIFT));
+ ((priv->devtype_data->ahb_buf_size >> 3) << QSPI_BUF3CR_ADATSZ_SHIFT));
/* We only use the buffer3 */
qspi_write32(priv->flags, ®s->buf0ind, 0);
@@ -503,7 +534,7 @@ static void qspi_op_rdbank(struct fsl_qspi_priv *priv, u8 *rxbuf, u32 len)
reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[0]);
- data = qspi_endian_xchg(data);
+ data = qspi_endian_xchg(priv, data);
memcpy(rxbuf, &data, len);
qspi_write32(priv->flags, ®s->mcr,
qspi_read32(priv->flags, ®s->mcr) |
@@ -536,13 +567,13 @@ static void qspi_op_rdid(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
;
i = 0;
- while ((RX_BUFFER_SIZE >= len) && (len > 0)) {
+ while ((priv->devtype_data->rxfifo >= len) && (len > 0)) {
WATCHDOG_RESET();
rbsr_reg = qspi_read32(priv->flags, ®s->rbsr);
if (rbsr_reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[i]);
- data = qspi_endian_xchg(data);
+ data = qspi_endian_xchg(priv, data);
size = (len < 4) ? len : 4;
memcpy(rxbuf, &data, size);
len -= size;
@@ -581,8 +612,8 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
qspi_write32(priv->flags, ®s->sfar, to_or_from);
- size = (len > RX_BUFFER_SIZE) ?
- RX_BUFFER_SIZE : len;
+ size = (len > priv->devtype_data->rxfifo) ?
+ priv->devtype_data->rxfifo : len;
qspi_write32(priv->flags, ®s->ipcr,
(seqid << QSPI_IPCR_SEQID_SHIFT) |
@@ -594,9 +625,9 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
len -= size;
i = 0;
- while ((RX_BUFFER_SIZE >= size) && (size > 0)) {
+ while ((priv->devtype_data->rxfifo >= size) && (size > 0)) {
data = qspi_read32(priv->flags, ®s->rbdr[i]);
- data = qspi_endian_xchg(data);
+ data = qspi_endian_xchg(priv, data);
if (size < 4)
memcpy(rxbuf, &data, size);
else
@@ -643,7 +674,7 @@ static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
status_reg = qspi_read32(priv->flags, ®s->rbdr[0]);
- status_reg = qspi_endian_xchg(status_reg);
+ status_reg = qspi_endian_xchg(priv, status_reg);
}
qspi_write32(priv->flags, ®s->mcr,
qspi_read32(priv->flags, ®s->mcr) |
@@ -665,8 +696,8 @@ static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
qspi_write32(priv->flags, ®s->sfar, to_or_from);
- tx_size = (len > TX_BUFFER_SIZE) ?
- TX_BUFFER_SIZE : len;
+ tx_size = (len > priv->devtype_data->txfifo) ?
+ priv->devtype_data->txfifo : len;
size = tx_size / 16;
/*
@@ -677,7 +708,7 @@ static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
size++;
for (i = 0; i < size * 4; i++) {
memcpy(&data, txbuf, 4);
- data = qspi_endian_xchg(data);
+ data = qspi_endian_xchg(priv, data);
qspi_write32(priv->flags, ®s->tbdr, data);
txbuf += 4;
}
@@ -714,7 +745,7 @@ static void qspi_op_rdsr(struct fsl_qspi_priv *priv, void *rxbuf, u32 len)
reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[0]);
- data = qspi_endian_xchg(data);
+ data = qspi_endian_xchg(priv, data);
memcpy(rxbuf, &data, len);
qspi_write32(priv->flags, ®s->mcr,
qspi_read32(priv->flags, ®s->mcr) |
@@ -866,8 +897,9 @@ void qspi_cfg_smpr(struct fsl_qspi_priv *priv, u32 clear_bits, u32 set_bits)
static int fsl_qspi_child_pre_probe(struct udevice *dev)
{
struct spi_slave *slave = dev_get_parent_priv(dev);
+ struct fsl_qspi_priv *priv = dev_get_priv(dev_get_parent(dev));
- slave->max_write_size = TX_BUFFER_SIZE;
+ slave->max_write_size = priv->devtype_data->txfifo;
return 0;
}
@@ -899,6 +931,19 @@ static int fsl_qspi_probe(struct udevice *bus)
priv->flash_num = plat->flash_num;
priv->num_chipselect = plat->num_chipselect;
+ priv->devtype_data = (struct fsl_qspi_devtype_data *)dev_get_driver_data(bus);
+ if (!priv->devtype_data) {
+ printf("ERROR : No devtype_data found\n");
+ return -ENODEV;
+ }
+
+ debug("devtype=%d, txfifo=%d, rxfifo=%d, ahb=%d, data=0x%x\n",
+ priv->devtype_data->devtype,
+ priv->devtype_data->txfifo,
+ priv->devtype_data->rxfifo,
+ priv->devtype_data->ahb_buf_size,
+ priv->devtype_data->driver_data);
+
/* make sure controller is not busy anywhere */
ret = is_controller_busy(priv);
@@ -1105,10 +1150,10 @@ static const struct dm_spi_ops fsl_qspi_ops = {
};
static const struct udevice_id fsl_qspi_ids[] = {
- { .compatible = "fsl,vf610-qspi" },
- { .compatible = "fsl,imx6sx-qspi" },
- { .compatible = "fsl,imx6ul-qspi" },
- { .compatible = "fsl,imx7d-qspi" },
+ { .compatible = "fsl,vf610-qspi", .data = (ulong)&vybrid_data },
+ { .compatible = "fsl,imx6sx-qspi", .data = (ulong)&imx6sx_data },
+ { .compatible = "fsl,imx6ul-qspi", .data = (ulong)&imx6ul_7d_data },
+ { .compatible = "fsl,imx7d-qspi", .data = (ulong)&imx6ul_7d_data },
{ }
};
--
2.7.4
More information about the U-Boot
mailing list