[U-Boot] [PATCH 5/6] bmips: bcm63268: add support for brcmnand

[Daniel Schwierzeck]

Am 13.08.19 um 21:19 schrieb Álvaro Fernández Rojas:
> BCM63268 uses 4.0 HW nand controller, which is currently supported by
> brcmnand driver.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
> ---
>  arch/mips/dts/brcm,bcm63268.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/mips/dts/brcm,bcm63268.dtsi b/arch/mips/dts/brcm,bcm63268.dtsi
> index f8a72ef535..5294242529 100644
> --- a/arch/mips/dts/brcm,bcm63268.dtsi
> +++ b/arch/mips/dts/brcm,bcm63268.dtsi
> @@ -141,6 +141,24 @@
>  			status = "disabled";
>  		};
>  
> +		nand: nand-controller at 10000200 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "brcm,nand-bcm6368",

if BCM63268 is already supported by brcmnand, why should it match with
your new driver?

> +				     "brcm,brcmnand-v4.0",
> +				     "brcm,brcmnand";
> +			reg-names = "nand",
> +				    "nand-cache",
> +				    "nand-int-base";
> +			reg = <0x10000200 0x180>,
> +			      <0x10000600 0x200>,
> +			      <0x100000b0 0x10>;
> +			clocks = <&periph_clk BCM63268_CLK_NAND>;
> +			clock-names = "nand";
> +
> +			status = "disabled";
> +		};
> +
>  		periph_pwr: power-controller at 1000184c {
>  			compatible = "brcm,bcm6328-power-domain";
>  			reg = <0x1000184c 0x4>;
> 

-- 
- Daniel