[U-Boot] [PATCH v4 2/2] board: Add support for iMX8QXP AI_ML board
Manivannan Sadhasivam
manivannan.sadhasivam at linaro.org
Thu Aug 15 08:16:30 UTC 2019
Hi Lukasz,
On Thu, Aug 15, 2019 at 09:51:25AM +0200, Lukasz Majewski wrote:
> Hi Manivannan,
>
> > Hi Lukasz,
> >
> > Thanks for the review!
> >
> > On Wed, Jul 24, 2019 at 10:07:13AM +0200, Lukasz Majewski wrote:
> > > Hi Manivannan,
> > >
> > > > This commit adds initial board support for iMX8QXP AI_ML board
> > > > from Einfochips. This board is one of the 96Boards Consumer
> > > > Edition and AI boards of the 96Boards family based on i.MX8QXP
> > > > SoC from NXP/Freescale.
> > > >
> > > > This initial supports contains following peripherals which are
> > > > tested and known to work:
> > > >
> > > > 1. Debug serial via UART2
> > > > 2. SD card
> > > > 3. Ethernet
> > > >
> > > > More information about this board can be found in arrow website:
> > > > https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools
> > > >
> > > > Signed-off-by: Manivannan Sadhasivam
> > > > <manivannan.sadhasivam at linaro.org> ---
> > > > arch/arm/mach-imx/imx8/Kconfig | 6 +
> > > > board/einfochips/imx8qxp_ai_ml/Kconfig | 12 ++
> > > > board/einfochips/imx8qxp_ai_ml/MAINTAINERS | 6 +
> > > > board/einfochips/imx8qxp_ai_ml/Makefile | 8 ++
> > > > board/einfochips/imx8qxp_ai_ml/README | 49 ++++++++
> > > > .../einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c | 117
> > > > ++++++++++++++++++ board/einfochips/imx8qxp_ai_ml/imximage.cfg |
> > > > 24 ++++ board/einfochips/imx8qxp_ai_ml/spl.c | 49
> > > > ++++++++ configs/imx8qxp_ai_ml_defconfig | 83
> > > > +++++++++++++ include/configs/imx8qxp_ai_ml.h | 104
> > > > ++++++++++++++++ 10 files changed, 458 insertions(+)
> > > > create mode 100644 board/einfochips/imx8qxp_ai_ml/Kconfig
> > > > create mode 100644 board/einfochips/imx8qxp_ai_ml/MAINTAINERS
> > > > create mode 100644 board/einfochips/imx8qxp_ai_ml/Makefile
> > > > create mode 100644 board/einfochips/imx8qxp_ai_ml/README
> > > > create mode 100644 board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
> > > > create mode 100644 board/einfochips/imx8qxp_ai_ml/imximage.cfg
> > > > create mode 100644 board/einfochips/imx8qxp_ai_ml/spl.c
> > > > create mode 100644 configs/imx8qxp_ai_ml_defconfig
> > > > create mode 100644 include/configs/imx8qxp_ai_ml.h
> > > >
> > > > diff --git a/arch/arm/mach-imx/imx8/Kconfig
> > > > b/arch/arm/mach-imx/imx8/Kconfig index bbe323d5ca..cec21f8dd2
> > > > 100644 --- a/arch/arm/mach-imx/imx8/Kconfig
> > > > +++ b/arch/arm/mach-imx/imx8/Kconfig
> > > > @@ -37,6 +37,11 @@ config TARGET_COLIBRI_IMX8X
> > > > select BOARD_LATE_INIT
> > > > select IMX8QXP
> > > >
> > > > +config TARGET_IMX8QXP_AI_ML
> > > > + bool "Support i.MX8QXP AI_ML board"
> > > > + select BOARD_LATE_INIT
> > > > + select IMX8QXP
> > > > +
> > > > config TARGET_IMX8QM_MEK
> > > > bool "Support i.MX8QM MEK board"
> > > > select BOARD_LATE_INIT
> > > > @@ -49,6 +54,7 @@ config TARGET_IMX8QXP_MEK
> > > >
> > > > endchoice
> > > >
> > > > +source "board/einfochips/imx8qxp_ai_ml/Kconfig"
> > > > source "board/freescale/imx8qm_mek/Kconfig"
> > > > source "board/freescale/imx8qxp_mek/Kconfig"
> > > > source "board/toradex/apalis-imx8/Kconfig"
> > > > diff --git a/board/einfochips/imx8qxp_ai_ml/Kconfig
> > > > b/board/einfochips/imx8qxp_ai_ml/Kconfig new file mode 100644
> > > > index 0000000000..697a831013
> > > > --- /dev/null
> > > > +++ b/board/einfochips/imx8qxp_ai_ml/Kconfig
> > > > @@ -0,0 +1,12 @@
> > > > +if TARGET_IMX8QXP_AI_ML
> > > > +
> > > > +config SYS_BOARD
> > > > + default "imx8qxp_ai_ml"
> > > > +
> > > > +config SYS_VENDOR
> > > > + default "einfochips"
> > > > +
> > > > +config SYS_CONFIG_NAME
> > > > + default "imx8qxp_ai_ml"
> > > > +
> > > > +endif
> > > > diff --git a/board/einfochips/imx8qxp_ai_ml/MAINTAINERS
> > > > b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS new file mode 100644
> > > > index 0000000000..add0bd9431
> > > > --- /dev/null
> > > > +++ b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS
> > > > @@ -0,0 +1,6 @@
> > > > +i.MX8QXP AI_ML BOARD
> > > > +M: Manivannan Sadhasivam
> > > > <manivannan.sadhasivam at linaro.org> +S: Maintained
> > > > +F: board/einfochips/imx8qxp_ai_ml/
> > > > +F: include/configs/imx8qxp_ai_ml.h
> > > > +F: configs/imx8qxp_ai_ml_defconfig
> > > > diff --git a/board/einfochips/imx8qxp_ai_ml/Makefile
> > > > b/board/einfochips/imx8qxp_ai_ml/Makefile new file mode 100644
> > > > index 0000000000..e08774dc6e
> > > > --- /dev/null
> > > > +++ b/board/einfochips/imx8qxp_ai_ml/Makefile
> > > > @@ -0,0 +1,8 @@
> > > > +#
> > > > +# Copyright 2019 Linaro Ltd.
> > > > +#
> > > > +# SPDX-License-Identifier: GPL-2.0+
> > > > +#
> > > > +
> > > > +obj-y += imx8qxp_ai_ml.o
> > > > +obj-$(CONFIG_SPL_BUILD) += spl.o
> > > > diff --git a/board/einfochips/imx8qxp_ai_ml/README
> > > > b/board/einfochips/imx8qxp_ai_ml/README new file mode 100644
> > > > index 0000000000..488920580f
> > > > --- /dev/null
> > > > +++ b/board/einfochips/imx8qxp_ai_ml/README
> > >
> > > Thank you for preparing the README file, appreciated :-).
> > >
> > > > @@ -0,0 +1,49 @@
> > > > +U-Boot for the Einfochips i.MX8QXP AI_ML board
> > > > +
> > > > +Quick Start
> > > > +===========
> > > > +
> > > > +- Get and Build the ARM Trusted firmware
> > > > +- Get scfw_tcm.bin and ahab-container.img
> > > > +- Build U-Boot
> > > > +- Flash the binary into the SD card
> > > > +- Boot
> > > > +
> > > > +Get and Build the ARM Trusted firmware
> > > > +======================================
> > > > +
> > > > +$ git clone https://source.codeaurora.org/external/imx/imx-atf
> > > > +$ cd imx-atf/
> > > > +$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b
> > > > imx_4.9.88_imx8qxp_beta2 +$ make PLAT=imx8qxp bl31
> > > > +
> > > > +Get scfw_tcm.bin and ahab-container.img
> > > > +=======================================
> > > > +
> > > > +$ wget
> > > > https://raw.githubusercontent.com/96boards-ai-ml/binaries/master/mx8qx-aiml-scfw-tcm.bin
> > > > +$ wget
> > > > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.1.bin +$
> > > > chmod +x firmware-imx-8.1.bin +$ ./firmware-imx-8.1.bin +
> > > > +Copy the following binaries to U-Boot folder:
> > > > +
> > > > +$ cp imx-atf/build/imx8qxp/release/bl31.bin .
> > > > +$ cp firmware-imx-8.1/firmware/seco/mx8qx-ahab-container.img .
> > > > +
> > > > +Build U-Boot
> > > > +============
> > > > +
> > > > +$ make imx8qxp_ai_ml_defconfig
> > > > +$ make u-boot-dtb.imx
> > > > +
> > > > +Flash the binary into the SD card
> > > > +=================================
> > > > +
> > > > +Burn the u-boot-dtb.imx binary to SD card offset 32KB:
> > > > +
> > > > +$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32
> > > > +
> > > > +Boot
> > > > +====
> > > > +
> > > > +Set Boot switch SW2: 1100.
> > > > diff --git a/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
> > > > b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c new file mode
> > > > 100644 index 0000000000..e7632524a0
> > > > --- /dev/null
> > > > +++ b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
> > > > @@ -0,0 +1,117 @@
> > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > +/*
> > > > + * Copyright 2018 NXP
> > > > + * Copyright 2019 Linaro Ltd.
> > > > + */
> > > > +
> > > > +#include <common.h>
> > > > +#include <errno.h>
> > > > +#include <linux/libfdt.h>
> > > > +#include <environment.h>
> > > > +#include <fsl_esdhc.h>
> > > > +#include <asm/io.h>
> > > > +#include <asm/arch/clock.h>
> > > > +#include <asm/arch/sci/sci.h>
> > > > +#include <asm/arch/imx8-pins.h>
> > > > +#include <asm/arch/iomux.h>
> > > > +#include <asm/arch/sys_proto.h>
> > > > +
> > > > +DECLARE_GLOBAL_DATA_PTR;
> > > > +
> > > > +#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN <<
> > > > PADRING_CONFIG_SHIFT) | \
> > > > + (SC_PAD_ISO_OFF <<
> > > > PADRING_LPCONFIG_SHIFT) | \
> > > > + (SC_PAD_28FDSOI_DSE_DV_HIGH <<
> > > > PADRING_DSE_SHIFT) | \
> > > > + (SC_PAD_28FDSOI_PS_PU <<
> > > > PADRING_PULL_SHIFT)) +
> > > > +static iomux_cfg_t uart2_pads[] = {
> > > > + SC_P_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
> > > > + SC_P_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> > > > +};
> > >
> > > As fair as I see - the uart could be configured via DTS (by using
> > > the pinmux driver) as this is the U-Boot proper file.
> > >
> >
> > Agree, this is not needed.
> >
> > > > +
> > > > +static void setup_iomux_uart(void)
> > > > +{
> > > > + imx8_iomux_setup_multiple_pads(uart2_pads,
> > > > ARRAY_SIZE(uart2_pads)); +}
> > > > +
> > > > +int board_early_init_f(void)
> > > > +{
> > > > + sc_pm_clock_rate_t rate = SC_80MHZ;
> > > > + int ret;
> > > > +
> > > > + /* Set UART2 clock root to 80 MHz */
> > > > + ret = sc_pm_setup_uart(SC_R_UART_2, rate);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + setup_iomux_uart();
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +#if IS_ENABLED(CONFIG_DM_GPIO)
> > > > +static void board_gpio_init(void)
> > > > +{
> > > > + /* TODO */
> > > > +}
> > > > +#else
> > > > +static inline void board_gpio_init(void) {}
> > > > +#endif
> > > > +
> > >
> > > I'm wondering if the above function is needed?
> > >
> >
> > I thought about keeping this as I may add some gpio configurations
> > in future. But, yeah I can remove it now and add once needed.
>
> The general rule is to avoid adding any dead (i.e. not used) code to
> the main line.
>
> The practical reason for it is to have the code base as small as
> possible. Moreover, the patch, which adds this board is rather large,
> so in that way we make it smaller.
>
> This code shall be added when you introduce the GPIO needed for this
> board.
>
Okay, thanks for the info!
> >
> > > > +#if IS_ENABLED(CONFIG_FEC_MXC)
> > > > +#include <miiphy.h>
> > > > +
> > > > +int board_phy_config(struct phy_device *phydev)
> > > > +{
> > > > + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
> > > > + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
> > > > +
> > > > + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
> > > > + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
> > > > +
> > > > + if (phydev->drv->config)
> > > > + phydev->drv->config(phydev);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +#endif
> > > > +
> > > > +int checkboard(void)
> > > > +{
> > > > + puts("Board: iMX8QXP AI_ML\n");
> > > > +
> > > > + build_info();
> > > > + print_bootinfo();
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +int board_init(void)
> > > > +{
> > > > + board_gpio_init();
> > > > +
> > > > + return 0;
> > > > +}
> > >
> > > Here you call the empty board_gpio_init().
> > >
> >
> > As per above comment, I'll remove it.
> >
> > > > +
> > > > +/* Board specific reset that is system reset */
> > > > +
> > > > +void reset_cpu(ulong addr)
> > > > +{
> > > > + /* TODO */
> > > > +}
> > >
> > > Maybe you could use the SYSRESET driver from the outset? It
> > > internally uses WDT for reset.
> > >
> >
> > Hmm, looks like there is no watchdog driver for imx8qxp yet.
>
> If I may ask - how do you plan to reset the board? On most i.MX boards
> the reset is done by triggering the WDT.
>
For i.MX8 boards, there is no reset support in u-boot. So I'll bank on the
NXP folks to add it :-) On the linux side, we have the watchdog driver which
will do SMC call to trigger reset.
> >
> > > > +
> > > > +#ifdef CONFIG_OF_BOARD_SETUP
> > > > +int ft_board_setup(void *blob, bd_t *bd)
> > > > +{
> > > > + return 0;
> > > > +}
> > > > +#endif
> > > > +
> > > > +int board_mmc_get_env_dev(int devno)
> > > > +{
> > > > + return devno;
> > > > +}
> > >
> > > This (the device and its instance) could be set in Kconfig.
> > >
> >
> > Ack.
> >
> > > > +
> > > > +int board_late_init(void)
> > > > +{
> > > > + return 0;
> > > > +}
> > > > diff --git a/board/einfochips/imx8qxp_ai_ml/imximage.cfg
> > > > b/board/einfochips/imx8qxp_ai_ml/imximage.cfg new file mode 100644
> > > > index 0000000000..4fc5ade313
> > > > --- /dev/null
> > > > +++ b/board/einfochips/imx8qxp_ai_ml/imximage.cfg
> > > > @@ -0,0 +1,24 @@
> > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > +/*
> > > > + * Copyright 2018 NXP
> > > > + *
> > > > + * Refer doc/README.imx8image for more details about how-to
> > > > configure
> > > > + * and create imx8image boot image
> > > > + */
> > > > +
> > > > +#define __ASSEMBLY__
> > > > +
> > > > +/* Boot from SD, sector size 0x400 */
> > > > +BOOT_FROM SD 0x400
> > > > +/* SoC type IMX8QX */
> > > > +SOC_TYPE IMX8QX
> > > > +/* Append seco container image */
> > > > +APPEND mx8qx-ahab-container.img
> > > > +/* Create the 2nd container */
> > > > +CONTAINER
> > > > +/* Add scfw image with exec attribute */
> > > > +IMAGE SCU mx8qx-aiml-scfw-tcm.bin
> > > > +/* Add ATF image with exec attribute */
> > > > +IMAGE A35 bl31.bin 0x80000000
> > > > +/* Add U-Boot image with load attribute */
> > > > +DATA A35 u-boot-dtb.bin 0x80020000
> > > > diff --git a/board/einfochips/imx8qxp_ai_ml/spl.c
> > > > b/board/einfochips/imx8qxp_ai_ml/spl.c new file mode 100644
> > > > index 0000000000..63581eeaaf
> > > > --- /dev/null
> > > > +++ b/board/einfochips/imx8qxp_ai_ml/spl.c
> > > > @@ -0,0 +1,49 @@
> > > > +/*
> > > > + * Copyright 2018 NXP
> > > > + *
> > > > + * SPDX-License-Identifier: GPL-2.0+
> > > > + */
> > > > +
> > > > +#include <common.h>
> > > > +#include <dm.h>
> > > > +#include <spl.h>
> > > > +#include <dm/uclass.h>
> > > > +#include <dm/device.h>
> > > > +#include <dm/uclass-internal.h>
> > > > +#include <dm/device-internal.h>
> > > > +#include <dm/lists.h>
> > > > +
> > > > +DECLARE_GLOBAL_DATA_PTR;
> > > > +
> > > > +void spl_board_init(void)
> > > > +{
> > > > + struct udevice *dev;
> > > > +
> > > > + uclass_find_first_device(UCLASS_MISC, &dev);
> > > > +
> > > > + for (; dev; uclass_find_next_device(&dev)) {
> > > > + if (device_probe(dev))
> > > > + continue;
> > > > + }
> > >
> > > What devices needs to be initialized in that way ?
> > >
> >
> > Mostly SCU but it is not needed, so I'll remove it.
>
> Ok.
>
> >
> > > > +
> > > > + arch_cpu_init();
> > > > +
> > > > + board_early_init_f();
> > > > +
> > > > + timer_init();
> > > > +
> > > > + preloader_console_init();
> > > > +
> > > > + puts("Normal Boot\n");
> > > > +}
> > > > +
> > > > +void board_init_f(ulong dummy)
> > > > +{
> > > > + /* Clear global data */
> > > > + memset((void *)gd, 0, sizeof(gd_t));
> > > > +
> > > > + /* Clear the BSS. */
> > > > + memset(__bss_start, 0, __bss_end - __bss_start);
> > > > +
> > > > + board_init_r(NULL, 0);
> > > > +}
> > > > diff --git a/configs/imx8qxp_ai_ml_defconfig
> > > > b/configs/imx8qxp_ai_ml_defconfig new file mode 100644
> > > > index 0000000000..e20a0c783e
> > > > --- /dev/null
> > > > +++ b/configs/imx8qxp_ai_ml_defconfig
> > > > @@ -0,0 +1,83 @@
> > > > +CONFIG_ARM=y
> > > > +CONFIG_ARCH_IMX8=y
> > > > +CONFIG_SYS_TEXT_BASE=0x80020000
> > > > +CONFIG_DISTRO_DEFAULTS=y
> > > > +CONFIG_SPL_GPIO_SUPPORT=y
> > > > +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> > > > +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> > > > +CONFIG_SYS_MALLOC_F_LEN=0x4000
> > > > +CONFIG_TARGET_IMX8QXP_AI_ML=y
> > > > +CONFIG_SPL_MMC_SUPPORT=y
> > > > +CONFIG_SPL_SERIAL_SUPPORT=y
> > > > +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> > > > +CONFIG_NR_DRAM_BANKS=4
> > > > +CONFIG_SPL=y
> > > > +CONFIG_FIT=y
> > > > +CONFIG_SPL_LOAD_FIT=y
> > > > +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
> > > > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/einfochips/imx8qxp_ai_ml/imximage.cfg"
> > > > +CONFIG_BOOTDELAY=3
> > > > +CONFIG_LOG=y
> > > > +CONFIG_SPL_BOARD_INIT=y
> > > > +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> > > > +CONFIG_SPL_SEPARATE_BSS=y
> > > > +CONFIG_SPL_POWER_SUPPORT=y
> > > > +CONFIG_SPL_POWER_DOMAIN=y
> > > > +CONFIG_SPL_WATCHDOG_SUPPORT=y
> > > > +CONFIG_HUSH_PARSER=y
> > > > +CONFIG_CMD_CPU=y
> > > > +# CONFIG_CMD_IMPORTENV is not set
> > > > +CONFIG_CMD_CLK=y
> > > > +CONFIG_CMD_DM=y
> > > > +CONFIG_CMD_FUSE=y
> > > > +CONFIG_CMD_GPIO=y
> > > > +CONFIG_CMD_GPT=y
> > > > +CONFIG_CMD_I2C=y
> > > > +CONFIG_CMD_MMC=y
> > > > +CONFIG_CMD_DHCP=y
> > > > +CONFIG_CMD_MII=y
> > > > +CONFIG_CMD_PING=y
> > > > +CONFIG_CMD_CACHE=y
> > > > +CONFIG_CMD_EXT4=y
> > > > +CONFIG_CMD_EXT4_WRITE=y
> > > > +CONFIG_CMD_FAT=y
> > > > +CONFIG_FAT_WRITE=y
> > > > +CONFIG_CMD_FS_GENERIC=y
> > > > +CONFIG_SPL_OF_CONTROL=y
> > > > +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-ai_ml"
> > > > +CONFIG_ENV_IS_IN_MMC=y
> > > > +CONFIG_SPL_DM=y
> > > > +CONFIG_SPL_CLK=y
> > > > +CONFIG_CLK_IMX8=y
> > > > +CONFIG_CPU=y
> > > > +CONFIG_DM_GPIO=y
> > > > +CONFIG_MXC_GPIO=y
> > > > +CONFIG_DM_I2C=y
> > > > +CONFIG_SYS_I2C_IMX_LPI2C=y
> > > > +CONFIG_MISC=y
> > > > +CONFIG_DM_MMC=y
> > > > +CONFIG_FSL_ESDHC=y
> > > > +CONFIG_PHYLIB=y
> > > > +CONFIG_PHY_ADDR_ENABLE=y
> > > > +CONFIG_PHY_ATHEROS=y
> > > > +CONFIG_DM_ETH=y
> > > > +CONFIG_NET_RANDOM_ETHADDR=y
> > > > +CONFIG_PHY_GIGE=y
> > > > +CONFIG_FEC_MXC_SHARE_MDIO=y
> > > > +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
> > > > +CONFIG_FEC_MXC=y
> > > > +CONFIG_MII=y
> > > > +CONFIG_PINCTRL=y
> > > > +CONFIG_SPL_PINCTRL=y
> > > > +CONFIG_PINCTRL_IMX8=y
> > > > +CONFIG_POWER_DOMAIN=y
> > > > +CONFIG_IMX8_POWER_DOMAIN=y
> > > > +CONFIG_DM_REGULATOR=y
> > > > +CONFIG_SPL_DM_REGULATOR=y
> > > > +CONFIG_DM_REGULATOR_FIXED=y
> > > > +CONFIG_DM_REGULATOR_GPIO=y
> > > > +CONFIG_SPL_DM_REGULATOR_GPIO=y
> > > > +CONFIG_DM_SERIAL=y
> > > > +CONFIG_FSL_LPUART=y
> > > > +CONFIG_SPL_TINY_MEMSET=y
> > > > +# CONFIG_EFI_LOADER is not set
> > > > diff --git a/include/configs/imx8qxp_ai_ml.h
> > > > b/include/configs/imx8qxp_ai_ml.h new file mode 100644
> > > > index 0000000000..dd31189845
> > > > --- /dev/null
> > > > +++ b/include/configs/imx8qxp_ai_ml.h
> > > > @@ -0,0 +1,104 @@
> > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > +/*
> > > > + * Copyright 2018 NXP
> > > > + * Copyright 2019 Linaro Ltd.
> > > > + */
> > > > +
> > > > +#ifndef __IMX8QXP_AI_ML_H
> > > > +#define __IMX8QXP_AI_ML_H
> > > > +
> > > > +#include <linux/sizes.h>
> > > > +#include <asm/arch/imx-regs.h>
> > > > +
> > > > +#ifdef CONFIG_SPL_BUILD
> > > > +#define CONFIG_SPL_MAX_SIZE (124 *
> > > > 1024) +#define CONFIG_SYS_MONITOR_LEN
> > > > (1024 * 1024) +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
> > > > +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
> > > > 0x250 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0
> > > > +
> > > > +#define
> > > > CONFIG_SPL_LDSCRIPT
> > > > "arch/arm/cpu/armv8/u-boot-spl.lds" +#define
> > > > CONFIG_SPL_STACK 0x013E000 +#define
> > > > CONFIG_SPL_BSS_START_ADDR 0x00128000 +#define
> > > > CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */
> > > > +#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 +#define
> > > > CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */
> > > > +#define CONFIG_SERIAL_LPUART_BASE 0x5a080000 +#define
> > > > CONFIG_MALLOC_F_ADDR 0x00120000 + +#define
> > > > CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE +
> > > > +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
> > > > +
> > > > +#define CONFIG_OF_EMBED
> > >
> > > I'm not sure if the OF_EMBED is not deprecated ... and replaced by
> > > OF_SEPARATED.
> > >
> >
> > I'm not sure about this. I don't see any such information.
>
> There was a u-boot ML discussion about OF_EMBED deprecation.
> https://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&state=*&q=OF_EMBED&archive=both&delegate=
>
> Also please see:
> https://www.chromium.org/developers/u-boot
>
Okay, thanks for the pointer.
> >
> > > > +#endif
> > > > +
> > > > +#define CONFIG_REMAKE_ELF
> > > > +
> > > > +#define CONFIG_BOARD_EARLY_INIT_F
> > >
> > > This could be set in Kconfig, IIRC
> > >
> >
> > Ack.
> >
> > > > +
> > > > +/* Flat Device Tree Definitions */
> > > > +#define CONFIG_OF_BOARD_SETUP
> > > > +
> > > > +#define CONFIG_FSL_USDHC
> > > > +
> > > > +#define CONFIG_ENV_OVERWRITE
> > > > +
> > > > +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> > > > +
> > > > +#define BOOT_TARGET_DEVICES(func) \
> > > > + func(MMC, mmc, 1) \
> > > > + func(DHCP, dhcp, na)
> > > > +
> > > > +#include <config_distro_bootcmd.h>
> > > > +/* Initial environment variables */
> > > > +#define CONFIG_EXTRA_ENV_SETTINGS
> > > > \
> > > > + "console=ttyLP2 earlycon\0" \
> > > > + "fdt_addr_r=0x83000000\0" \
> > > > + "kernel_addr_r=0x81000000\0" \
> > > > + "ramdisk_addr_r=0x94400000\0" \
> > > > + "scriptaddr=0x89000000\0" \
> > > > + "fdtfile=imx8qxp-ai_ml.dtb\0" \
> > > > + "fdt_high=0xffffffffffffffff\0" \
> > > > + "image=Image\0" \
> > > > + "initrd_addr=0x83800000\0" \
> > > > + "initrd_high=0xffffffffffffffff\0" \
> > > > + "netargs=setenv bootargs console=${console},${baudrate}
> > > > " \
> > > > + "root=/dev/nfs ip=dhcp
> > > > nfsroot=${serverip}:${nfsroot},v3,tcp" \
> > > > + "\0" \
> > > > + "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp
> > > > ${fdt_addr} " \
> > > > + "imx8qxp-ai_ml/${fdt_file}; booti ${loadaddr} -
> > > > ${fdt_addr}\0" \
> > > > + BOOTENV
> > > > +
> > > > +/* Link Definitions */
> > > > +#define CONFIG_LOADADDR 0x80280000
> > > > +
> > > > +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> > > > +
> > > > +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
> > > > +
> > > > +/* Default environment is in SD */
> > > > +#define CONFIG_ENV_SIZE 0x1000
> > > > +#define CONFIG_ENV_OFFSET (64 * SZ_64K)
> > > > +
> > > > +/* USDHC2 is the SD card interface */
> > > > +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
> > > > +#define CONFIG_SYS_FSL_USDHC_NUM 2
> > > > +
> > >
> > > Some of those env setting defines as well as eMMC ones could be set
> > > now in Kconfig.
> > >
> >
> > Can you please specify those? I don't see these defines used in
> > Kconfig.
>
> The best (and simplest) way is to just check if the corresponding
> CONFIG_* option is already moved (ported) to Kconfig. For
> example ENV_SIZE and ENV_OFFSET are.
>
Yeah, I see it now that couple of boards are using it. Will do the same.
Thanks,
Mani
> >
> > > > +/* Size of malloc() pool */
> > > > +#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE +
> > > > (32
> > > > * 1024)) * 1024) +
> > > > +#define CONFIG_SYS_SDRAM_BASE 0x80000000
> > > > +#define PHYS_SDRAM_1 0x80000000
> > > > +#define PHYS_SDRAM_2 0x880000000
> > > > +#define PHYS_SDRAM_1_SIZE SZ_2G /*
> > > > 2
> > >
> > > Please fix this file globally, to use "SZ_XX" instead of magic
> > > numbers.
> >
> > Ack.
> >
> > Thanks,
> > Mani
> >
> > > > GB */ +#define PHYS_SDRAM_2_SIZE 0x00000000
> > > > /* 0 GB */ +
> > > > +/* Generic Timer Definitions */
> > > > +#define COUNTER_FREQUENCY 8000000 /* 8MHz
> > > > */ +
> > > > +/* Networking */
> > > > +#define CONFIG_FEC_XCV_TYPE RGMII
> > > > +#define FEC_QUIRK_ENET_MAC
> > > > +
> > > > +#endif /* __IMX8QXP_AI_ML_H */
> > >
> > >
> > >
> > >
> > > Best regards,
> > >
> > > Lukasz Majewski
> > >
> > > --
> > >
> > > DENX Software Engineering GmbH, Managing Director: Wolfgang
> > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > > lukma at denx.de
> >
> >
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
More information about the U-Boot
mailing list