[U-Boot] [PATCH v2 1/2] arm: dts: rock960: Enable booting from eMMC when using SPL

[Anand Moon]

Hi Manivannan,

On Sat, 17 Aug 2019 at 08:53, Manivannan Sadhasivam
<manivannan.sadhasivam at linaro.org> wrote:
>
> Hi,
>
> On Sat, Aug 17, 2019 at 12:23:35AM +0530, Anand Moon wrote:
> > Hi All,
> >
> > On Mon, 5 Aug 2019 at 20:09, Peter Robinson <pbrobinson at gmail.com> wrote:
> > >
> > > On Mon, Aug 5, 2019 at 1:54 PM Kever Yang <kever.yang at rock-chips.com> wrote:
> > > >
> > > >
> > > > On 2019/7/29 下午9:52, Manivannan Sadhasivam wrote:
> > > > > This commits enables booting from eMMC when using SPL on 96Boards
> > > > > Rock960 board by adding SDHCI to boot order. Since the SDHCI driver
> > > > > already has the reloc flag, this works straightaway. While we are at it,
> > > > > let's also include the common u-boot dtsi for rk3399.
> > > > >
> > > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> > > >
> > > > Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
> > >
> > > Tested-by: Peter Robinson <pbrobinson at gmail.com>
> > >
> >
> > I have with me Rock960 model A board, I could not get the
> > board to boot up using SPL image using microSD card.
> >
> > Build spl image for rock960
> > [1] https://pastebin.com/6gMPyNr1
> >
> > Console log of boot failed.
> > [2] https://pastebin.com/EvWzjD0y
> >
> > Could some body share the correct steps to build the spl image
> > for Rock960 Model A board for microSD card.
> >
>
> You seems to be using vendor u-boot! Please forward your questions to
> 96Boards forum: https://discuss.96boards.org/c/products/rock960
>
> Mailing list only covers issues with upstream u-boot.

Ok I will post my query over their on the forum.

Yes here is the boot log form my latest Non SPL boot from sdcard.
[0] https://pastebin.com/thSWWjPv

so I am able to boot using latest u-boot.

But when I build the u-boot using below steps it fails to boot.

[1] https://pastebin.com/6gMPyNr1

Best Regards
-Anand