[U-Boot] [PATCH v2 2/9] dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi file

[Peng Fan]

> Subject: [PATCH v2 2/9] dts: imx28: Remove #include "imx28.dtsi" from
> imx28-u-boot.dtsi file
> 
> After this change it is possible to use imx28-<board>-u-boot.dtsi with the
> imx28-u-boot.dtsi explicitly included without breaking setup from
> imx28-<board>.dts file.
> 
> The problem is that the imx28.dtsi included in a wrong place overrides the
> changes made in imx28-<board>.dts. As a result some devices are "disabled"
> in the final DTB.
> 
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> ---
> 
> Changes in v2: None
> 
>  arch/arm/dts/imx28-u-boot.dtsi | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/dts/imx28-u-boot.dtsi
> b/arch/arm/dts/imx28-u-boot.dtsi index d545b402a7..9db72a6be3 100644
> --- a/arch/arm/dts/imx28-u-boot.dtsi
> +++ b/arch/arm/dts/imx28-u-boot.dtsi
> @@ -5,7 +5,6 @@
>   *
>   * SPDX-License-Identifier:     GPL-2.0+ or X11
>   */
> -#include "imx28.dtsi"
> 
>  &gpio0 {
>  	gpio-ranges = <&pinctrl 0 0 29>;

Reviewed-by: Peng Fan <peng.fan at nxp.com>

> --
> 2.11.0