[U-Boot] [PATCH v5 1/5] spl: dm: disable SPI DM flash for non-DM SPL

Lukasz Majewski lukma at denx.de
Tue Aug 20 09:49:55 UTC 2019


On Tue, 20 Aug 2019 09:00:40 +0000
Xiaowei Bao <xiaowei.bao at nxp.com> wrote:

> > -----Original Message-----
> > From: Lukasz Majewski <lukma at denx.de>
> > Sent: 2019年8月20日 16:20
> > To: Xiaowei Bao <xiaowei.bao at nxp.com>
> > Cc: wd at denx.de; Ruchika Gupta <ruchika.gupta at nxp.com>; Shengzhou Liu
> > <shengzhou.liu at nxp.com>; jagan at amarulasolutions.com; Prabhakar
> > Kushwaha <prabhakar.kushwaha at nxp.com>; u-boot at lists.denx.de; Jiafei
> > Pan <jiafei.pan at nxp.com>; Chuanhua Han <chuanhua.han at nxp.com>
> > Subject: Re: [U-Boot] [PATCH v5 1/5] spl: dm: disable SPI DM flash
> > for non-DM SPL
> > 
> > On Tue, 20 Aug 2019 07:51:18 +0000
> > Xiaowei Bao <xiaowei.bao at nxp.com> wrote:
> >   
> > > > -----Original Message-----
> > > > From: Lukasz Majewski <lukma at denx.de>
> > > > Sent: 2019年8月20日 15:43
> > > > To: Xiaowei Bao <xiaowei.bao at nxp.com>
> > > > Cc: wd at denx.de; Ruchika Gupta <ruchika.gupta at nxp.com>;
> > > > Shengzhou  
> > Liu  
> > > > <shengzhou.liu at nxp.com>; jagan at amarulasolutions.com; Prabhakar
> > > > Kushwaha <prabhakar.kushwaha at nxp.com>; u-boot at lists.denx.de;
> > > > Jiafei Pan <jiafei.pan at nxp.com>; Pan Jiafei
> > > > <Jiafei.Pan at freescale.com>; Chuanhua Han <chuanhua.han at nxp.com>
> > > > Subject: Re: [U-Boot] [PATCH v5 1/5] spl: dm: disable SPI DM
> > > > flash for non-DM SPL
> > > >
> > > > On Tue, 20 Aug 2019 07:27:39 +0000
> > > > Xiaowei Bao <xiaowei.bao at nxp.com> wrote:
> > > >  
> > > > > > -----Original Message-----
> > > > > > From: Lukasz Majewski <lukma at denx.de>
> > > > > > Sent: 2019年8月20日 15:14
> > > > > > To: Xiaowei Bao <xiaowei.bao at nxp.com>
> > > > > > Cc: wd at denx.de; Ruchika Gupta <ruchika.gupta at nxp.com>;  
> > Shengzhou  
> > > > Liu  
> > > > > > <shengzhou.liu at nxp.com>; jagan at amarulasolutions.com;
> > > > > > Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>;
> > > > > > u-boot at lists.denx.de; Jiafei Pan <jiafei.pan at nxp.com>; Pan
> > > > > > Jiafei <Jiafei.Pan at freescale.com>; Chuanhua Han  
> > <chuanhua.han at nxp.com>  
> > > > > > Subject: Re: [U-Boot] [PATCH v5 1/5] spl: dm: disable SPI DM
> > > > > > flash for non-DM SPL
> > > > > >
> > > > > > Hi Xiaowei,
> > > > > >  
> > > > > > > From: Chuanhua Han <chuanhua.han at nxp.com>
> > > > > > >
> > > > > > > This patch solves the problem that spiboot cannot be
> > > > > > > performed in non-DM SPL.  
> > > > > >
> > > > > > I've posted recently a set of patches to move setting of
> > > > > > DM_SPI_FLASH to Kconfig:
> > > > > > https://patchwork.ozlabs.org/cover/1146494/
> > > > > >
> > > > > > Please rebase your work on top of it.  
> > > > > Did this set of patches merge to the u-boot mainline?  
> > > >
> > > > Those patches were not yet accepted to mainline.
> > > >  
> > > > > Do I need to
> > > > > depend on your patches?  
> > > >
> > > > It would be best to avoid duplicating the effort.
> > > >  
> > > > > If yes, please provide the full patches link, I can't see the
> > > > > contents of this set of patches.  
> > > >
> > > > When you open the link:
> > > > https://patchwork.ozlabs.org/cover/1146494/
> > > >
> > > > On top left you have:
> > > > "Related" -> "show"
> > > >
> > > > After clicking on it you will see the list of patches.
> > > >
> > > > You may also want to use "Series" on top right and download the
> > > > whole patch series.  
> > > I have check these set of patches, it don't impact my patches, my
> > > patches implemented the ESPI DM driver of POWERPC.  
> > 
> > But you add:
> > 
> > +#undef CONFIG_DM_SPI_FLASH
> > 
> > for SPL, Which is problematic as explained in the patch set.  
> Can I modify the patches like this?
> diff --git a/include/config_uncmd_spl.h b/include/config_uncmd_spl.h
> index da94b3d..c2f9735 100644
> --- a/include/config_uncmd_spl.h
> +++ b/include/config_uncmd_spl.h
> @@ -15,7 +15,6 @@
>  #undef CONFIG_DM_GPIO
>  #undef CONFIG_DM_I2C
>  #undef CONFIG_DM_SPI
> -#undef CONFIG_DM_SPI_FLASH
>  #endif
> 
>  #undef CONFIG_DM_WARN
> diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
> index 98bb334..b45ec4a 100644
> --- a/include/configs/T208xQDS.h
> +++ b/include/configs/T208xQDS.h
> @@ -10,6 +10,13 @@
>  #ifndef __T208xQDS_H
>  #define __T208xQDS_H
> 
> +/* SPI Flash Configs */
> +#if defined(CONFIG_SPL_BUILD)
> +#undef CONFIG_DM_SPI
> +#undef CONFIG_DM_SPI_FLASH
> +#undef CONFIG_SPI_FLASH_MTD
> +#endif

The whole point is to avoid adding the above code.

The rationale for this can be found in the commit message:
https://patchwork.ozlabs.org/patch/1146375/

> +
> >   
> > > >  
> > > > > >  
> > > > > > >
> > > > > > > Signed-off-by: Pan Jiafei <Jiafei.Pan at freescale.com>
> > > > > > > Signed-off-by: Chuanhua Han <chuanhua.han at nxp.com>
> > > > > > > ---
> > > > > > > Changes in v5:
> > > > > > > 	- No change.
> > > > > > > Changes in v4:
> > > > > > > 	- No change.
> > > > > > > Changes in v3:
> > > > > > > 	- Add a cover-letter for this patch set.
> > > > > > > Changes in v2:
> > > > > > > 	- No change.
> > > > > > >
> > > > > > >  include/config_uncmd_spl.h | 1 +
> > > > > > >  1 file changed, 1 insertion(+)
> > > > > > >
> > > > > > > diff --git a/include/config_uncmd_spl.h
> > > > > > > b/include/config_uncmd_spl.h index c2f9735..da94b3d 100644
> > > > > > > --- a/include/config_uncmd_spl.h
> > > > > > > +++ b/include/config_uncmd_spl.h
> > > > > > > @@ -15,6 +15,7 @@
> > > > > > >  #undef CONFIG_DM_GPIO
> > > > > > >  #undef CONFIG_DM_I2C
> > > > > > >  #undef CONFIG_DM_SPI
> > > > > > > +#undef CONFIG_DM_SPI_FLASH
> > > > > > >  #endif
> > > > > > >
> > > > > > >  #undef CONFIG_DM_WARN  
> > > > > >
> > > > > >
> > > > > >
> > > > > > Best regards,
> > > > > >
> > > > > > Lukasz Majewski
> > > > > >
> > > > > > --
> > > > > >
> > > > > > DENX Software Engineering GmbH,      Managing Director:  
> > Wolfgang  
> > > > > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194
> > > > > > Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax:
> > > > > > (+49)-8142-66989-80 Email: lukma at denx.de  
> > > >
> > > >
> > > >
> > > > Best regards,
> > > >
> > > > Lukasz Majewski
> > > >
> > > > --
> > > >
> > > > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194
> > > > Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax:
> > > > (+49)-8142-66989-80 Email: lukma at denx.de  
> > 
> > 
> > 
> > Best regards,
> > 
> > Lukasz Majewski
> > 
> > --
> > 
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de  



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190820/1bc109c1/attachment.sig>


More information about the U-Boot mailing list