[U-Boot] [RESEND PATCH v4 05/11] spl: support booting via RISC-V OpenSBI
Lukas Auer
lukas.auer at aisec.fraunhofer.de
Wed Aug 21 19:14:44 UTC 2019
RISC-V OpenSBI is an open-source implementation of the RISC-V Supervisor
Binary Interface (SBI) specification. It is required by Linux and U-Boot
running in supervisor mode. This patch adds support for booting via the
OpenSBI FW_DYNAMIC firmware. It supports OpenSBI version 0.4 and higher.
In this configuration, U-Boot SPL starts in machine mode. After loading
OpenSBI and U-Boot proper, it will start OpenSBI. All necessary
parameters are generated by U-Boot SPL and are passed to OpenSBI. U-Boot
proper is started in supervisor mode by OpenSBI. Support for OpenSBI is
enabled with CONFIG_SPL_OPENSBI. An additional configuration entry,
CONFIG_SPL_OPENSBI_LOAD_ADDR, is used to specify the load address of the
OpenSBI firmware binary. It is not used directly in U-Boot and instead
is intended to make the value available to scripts such as FIT
configuration generators.
The header file include/opensbi.h is based on header files from the
OpenSBI project. They are recent, as of commit bae54f764570 ("firmware:
Add fw_dynamic firmware").
Signed-off-by: Lukas Auer <lukas.auer at aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Tested-by: Bin Meng <bmeng.cn at gmail.com>
Reviewed-by: Anup Patel <anup.patel at wdc.com>
---
Changes in v4: None
Changes in v3:
- Update commit message to include minimum version of OpenSBI
Changes in v2: None
common/image.c | 1 +
common/spl/Kconfig | 17 ++++++++
common/spl/Makefile | 1 +
common/spl/spl.c | 6 +++
common/spl/spl_opensbi.c | 85 ++++++++++++++++++++++++++++++++++++++++
include/image.h | 1 +
include/opensbi.h | 40 +++++++++++++++++++
include/spl.h | 5 +++
8 files changed, 156 insertions(+)
create mode 100644 common/spl/spl_opensbi.c
create mode 100644 include/opensbi.h
diff --git a/common/image.c b/common/image.c
index 84e859a30f..645584b5ba 100644
--- a/common/image.c
+++ b/common/image.c
@@ -132,6 +132,7 @@ static const table_entry_t uimage_os[] = {
#if defined(CONFIG_BOOTM_OPENRTOS) || defined(USE_HOSTCC)
{ IH_OS_OPENRTOS, "openrtos", "OpenRTOS", },
#endif
+ { IH_OS_OPENSBI, "opensbi", "RISC-V OpenSBI", },
{ -1, "", "", },
};
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 630491699c..a819387cab 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1146,6 +1146,23 @@ config SPL_OPTEE
OP-TEE is an open source Trusted OS which is loaded by SPL.
More detail at: https://github.com/OP-TEE/optee_os
+config SPL_OPENSBI
+ bool "Support RISC-V OpenSBI"
+ depends on RISCV && SPL_RISCV_MMODE && RISCV_SMODE
+ help
+ OpenSBI is an open-source implementation of the RISC-V Supervisor Binary
+ Interface (SBI) specification. U-Boot supports the OpenSBI FW_DYNAMIC
+ firmware. It is loaded and started by U-Boot SPL.
+
+ More details are available at https://github.com/riscv/opensbi and
+ https://github.com/riscv/riscv-sbi-doc
+
+config SPL_OPENSBI_LOAD_ADDR
+ hex "OpenSBI load address"
+ depends on SPL_OPENSBI
+ help
+ Load address of the OpenSBI binary.
+
config TPL
bool
depends on SUPPORT_TPL
diff --git a/common/spl/Makefile b/common/spl/Makefile
index d28de692dd..5ce6f4ae48 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o
obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o
+obj-$(CONFIG_$(SPL_TPL_)OPENSBI) += spl_opensbi.o
obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o
obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 2c696f2a79..8c9415bedf 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -659,6 +659,12 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
(void *)spl_image.entry_point);
break;
#endif
+#if CONFIG_IS_ENABLED(OPENSBI)
+ case IH_OS_OPENSBI:
+ debug("Jumping to U-Boot via RISC-V OpenSBI\n");
+ spl_invoke_opensbi(&spl_image);
+ break;
+#endif
#ifdef CONFIG_SPL_OS_BOOT
case IH_OS_LINUX:
debug("Jumping to Linux\n");
diff --git a/common/spl/spl_opensbi.c b/common/spl/spl_opensbi.c
new file mode 100644
index 0000000000..a6b4480ed2
--- /dev/null
+++ b/common/spl/spl_opensbi.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Fraunhofer AISEC,
+ * Lukas Auer <lukas.auer at aisec.fraunhofer.de>
+ *
+ * Based on common/spl/spl_atf.c
+ */
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/smp.h>
+#include <opensbi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct fw_dynamic_info opensbi_info;
+
+static int spl_opensbi_find_uboot_node(void *blob, int *uboot_node)
+{
+ int fit_images_node, node;
+ const char *fit_os;
+
+ fit_images_node = fdt_path_offset(blob, "/fit-images");
+ if (fit_images_node < 0)
+ return -ENODEV;
+
+ fdt_for_each_subnode(node, blob, fit_images_node) {
+ fit_os = fdt_getprop(blob, node, FIT_OS_PROP, NULL);
+ if (!fit_os)
+ continue;
+
+ if (genimg_get_os_id(fit_os) == IH_OS_U_BOOT) {
+ *uboot_node = node;
+ return 0;
+ }
+ }
+
+ return -ENODEV;
+}
+
+void spl_invoke_opensbi(struct spl_image_info *spl_image)
+{
+ int ret, uboot_node;
+ ulong uboot_entry;
+ void (*opensbi_entry)(ulong hartid, ulong dtb, ulong info);
+
+ if (!spl_image->fdt_addr) {
+ pr_err("No device tree specified in SPL image\n");
+ hang();
+ }
+
+ /* Find U-Boot image in /fit-images */
+ ret = spl_opensbi_find_uboot_node(spl_image->fdt_addr, &uboot_node);
+ if (ret) {
+ pr_err("Can't find U-Boot node, %d", ret);
+ hang();
+ }
+
+ /* Get U-Boot entry point */
+ uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node,
+ "entry-point");
+ if (uboot_entry == FDT_ERROR)
+ uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node,
+ "load-addr");
+
+ /* Prepare obensbi_info object */
+ opensbi_info.magic = FW_DYNAMIC_INFO_MAGIC_VALUE;
+ opensbi_info.version = FW_DYNAMIC_INFO_VERSION;
+ opensbi_info.next_addr = uboot_entry;
+ opensbi_info.next_mode = FW_DYNAMIC_INFO_NEXT_MODE_S;
+ opensbi_info.options = SBI_SCRATCH_NO_BOOT_PRINTS;
+
+ opensbi_entry = (void (*)(ulong, ulong, ulong))spl_image->entry_point;
+ invalidate_icache_all();
+
+#ifdef CONFIG_SMP
+ ret = smp_call_function((ulong)spl_image->entry_point,
+ (ulong)spl_image->fdt_addr,
+ (ulong)&opensbi_info);
+ if (ret)
+ hang();
+#endif
+ opensbi_entry(gd->arch.boot_hart, (ulong)spl_image->fdt_addr,
+ (ulong)&opensbi_info);
+}
diff --git a/include/image.h b/include/image.h
index 27d7cb9d1e..404b7338e6 100644
--- a/include/image.h
+++ b/include/image.h
@@ -156,6 +156,7 @@ enum {
IH_OS_OPENRTOS, /* OpenRTOS */
IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */
IH_OS_TEE, /* Trusted Execution Environment */
+ IH_OS_OPENSBI, /* RISC-V OpenSBI */
IH_OS_COUNT,
};
diff --git a/include/opensbi.h b/include/opensbi.h
new file mode 100644
index 0000000000..9f1d62e7dd
--- /dev/null
+++ b/include/opensbi.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Based on include/sbi/{fw_dynamic.h,sbi_scratch.h} from the OpenSBI project.
+ */
+#ifndef OPENSBI_H
+#define OPENSBI_H
+
+/** Expected value of info magic ('OSBI' ascii string in hex) */
+#define FW_DYNAMIC_INFO_MAGIC_VALUE 0x4942534f
+
+/** Maximum supported info version */
+#define FW_DYNAMIC_INFO_VERSION 0x1
+
+/** Possible next mode values */
+#define FW_DYNAMIC_INFO_NEXT_MODE_U 0x0
+#define FW_DYNAMIC_INFO_NEXT_MODE_S 0x1
+#define FW_DYNAMIC_INFO_NEXT_MODE_M 0x3
+
+enum sbi_scratch_options {
+ /** Disable prints during boot */
+ SBI_SCRATCH_NO_BOOT_PRINTS = (1 << 0),
+};
+
+/** Representation dynamic info passed by previous booting stage */
+struct fw_dynamic_info {
+ /** Info magic */
+ unsigned long magic;
+ /** Info version */
+ unsigned long version;
+ /** Next booting stage address */
+ unsigned long next_addr;
+ /** Next booting stage mode */
+ unsigned long next_mode;
+ /** Options for OpenSBI library */
+ unsigned long options;
+} __packed;
+
+#endif
diff --git a/include/spl.h b/include/spl.h
index a90f971a23..e4640f3830 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -374,6 +374,11 @@ void spl_invoke_atf(struct spl_image_info *spl_image);
*/
void spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3);
+/**
+ * spl_invoke_opensbi - boot using a RISC-V OpenSBI image
+ */
+void spl_invoke_opensbi(struct spl_image_info *spl_image);
+
/**
* board_return_to_bootrom - allow for boards to continue with the boot ROM
*
--
2.21.0
More information about the U-Boot
mailing list