[U-Boot] [PATCH v2 1/2] arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)

[Sunil Mohan Adapa]

A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In
addition, there are two variants without eMMC. One without eMMC and one with SPI
flash. This suggests the need for separate device tree for the three eMMC
variants.

The Linux kernel upstream has chosen to create and use a separate device tree
for the eMMC variants instead of adding eMMC support existing device tree. These
changes to Linux kernel are queued for Linux 5.4.

https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?h=sunxi/dt-for-5.4&id=02bb66b347ff8115f53948f86b884e008ba385b9

This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux
device-tree.

Signed-off-by: Sunil Mohan Adapa <sunil at medhas.org>
---
 arch/arm/dts/Makefile                      |  1 +
 arch/arm/dts/sun50i-a64-olinuxino-emmc.dts | 23 ++++++++++++++++++++++
 2 files changed, 24 insertions(+)
 create mode 100644 arch/arm/dts/sun50i-a64-olinuxino-emmc.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 05ff624c07..d28906a63b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -530,6 +530,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
 	sun50i-a64-nanopi-a64.dtb \
 	sun50i-a64-oceanic-5205-5inmfd.dtb \
 	sun50i-a64-olinuxino.dtb \
+	sun50i-a64-olinuxino-emmc.dtb \
 	sun50i-a64-orangepi-win.dtb \
 	sun50i-a64-pine64-lts.dtb \
 	sun50i-a64-pine64-plus.dtb \
diff --git a/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts b/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts
new file mode 100644
index 0000000000..96ab0227e8
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Martin Ayotte <martinayotte at gmail.com>
+ * Copyright (C) 2019 Sunil Mohan Adapa <sunil at medhas.org>
+ */
+
+#include "sun50i-a64-olinuxino.dts"
+
+/ {
+	model = "Olimex A64-Olinuxino-eMMC";
+	compatible = "olimex,a64-olinuxino-emmc", "allwinner,sun50i-a64";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
-- 
2.20.1