[U-Boot] [PATCH 1/2] mtd: spi: Add SYS_SPI_BLOCK_SIZE to Kconfig

Marek Vasut marex at denx.de
Fri Aug 23 07:16:44 UTC 2019


On 8/23/19 5:29 AM, Chee, Tien Fong wrote:
> On Thu, 2019-08-22 at 09:54 +0200, Marek Vasut wrote:
>> On 8/22/19 9:40 AM, Chee, Tien Fong wrote:
>>>
>>> On Mon, 2019-07-29 at 15:48 +0800, tien.fong.chee at intel.com wrote:
>>>>
>>>> From: Tien Fong Chee <tien.fong.chee at intel.com>
>>>>
>>>> Different SPI flash has different block erase size configuration,
>>>> it
>>>> can
>>>> be configured as block erase size or sub-block erase size, so
>>>> SYS_SPI_BLOCK_SIZE is created to provide UBI a consistent block
>>>> reading.
>>>> UBI block reading would be eventually translated to offset
>>>> access into SPI regardless how the block erase size is configured
>>>> on
>>>> SPI.
>>>> This would made the UBI transparent from SPI layer.
>>>>
>>>> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
>>>> ---
>>>>  drivers/mtd/spi/Kconfig | 7 +++++++
>>>>  1 file changed, 7 insertions(+)
>>>>
>>>> diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
>>>> index d3b007a731..ea3779c521 100644
>>>> --- a/drivers/mtd/spi/Kconfig
>>>> +++ b/drivers/mtd/spi/Kconfig
>>>> @@ -196,4 +196,11 @@ config SPI_FLASH_MTD
>>>>  
>>>>  	  If unsure, say N
>>>>  
>>>> +config SYS_SPI_BLOCK_SIZE
>>>> +	hex "SPI chip eraseblock size for UBI reading"
>>>> +	depends on SPL_SPI_FLASH_SUPPORT
>>>> +	default 65536
>>>> +	help
>>>> +	  Number of data bytes in a physical eraseblock for UBI
>>>> reading.
>>>> +
>>>>  endmenu # menu "SPI Flash Support"
>>> Any comment?
>> UBI is able to obtain underlying media erase block size from the MTD
>> subsystem, just let it do that. Besides, any such compile-time config
>> would fail the next time you change the SPI NOR (e.g. because it's
>> EOL),
>> as that would force you to rebuild U-Boot, which might ultimately not
>> be
>> possible.
> 
> Okay, let me check how to get this info from MTD. If you have some
> ideas, you can let me know too :) .

It should all be there already, since you can already attach UBI on SPI
NOR from U-Boot.


More information about the U-Boot mailing list