[U-Boot] [PATCH v4 3/3] board: puma: Use rockchip_* helpers to setup cpuid and macaddr【请注意,邮件由u-boot-bounces at lists.denx.de代发】 setup cpuid and macaddr
Kever Yang
kever.yang at rock-chips.com
Fri Aug 23 09:36:16 UTC 2019
On 2019/8/12 下午11:04, Rohan Garg wrote:
> We should use the shared helpers to setup the necessary parts
>
> Signed-off-by: Rohan Garg <rohan.garg at collabora.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
>
> .../puma_rk3399/puma-rk3399.c | 108 +++---------------
> 1 file changed, 18 insertions(+), 90 deletions(-)
>
> diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
> index a7e7f022ba..562a6ec9c8 100644
> --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
> +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
> @@ -18,97 +18,10 @@
> #include <asm/arch-rockchip/hardware.h>
> #include <asm/arch-rockchip/grf_rk3399.h>
> #include <asm/arch-rockchip/periph.h>
> +#include <asm/arch-rockchip/misc.h>
> #include <power/regulator.h>
> #include <u-boot/sha256.h>
>
> -static void setup_macaddr(void)
> -{
> -#if CONFIG_IS_ENABLED(CMD_NET)
> - int ret;
> - const char *cpuid = env_get("cpuid#");
> - u8 hash[SHA256_SUM_LEN];
> - int size = sizeof(hash);
> - u8 mac_addr[6];
> -
> - /* Only generate a MAC address, if none is set in the environment */
> - if (env_get("ethaddr"))
> - return;
> -
> - if (!cpuid) {
> - debug("%s: could not retrieve 'cpuid#'\n", __func__);
> - return;
> - }
> -
> - ret = hash_block("sha256", (void *)cpuid, strlen(cpuid), hash, &size);
> - if (ret) {
> - debug("%s: failed to calculate SHA256\n", __func__);
> - return;
> - }
> -
> - /* Copy 6 bytes of the hash to base the MAC address on */
> - memcpy(mac_addr, hash, 6);
> -
> - /* Make this a valid MAC address and set it */
> - mac_addr[0] &= 0xfe; /* clear multicast bit */
> - mac_addr[0] |= 0x02; /* set local assignment bit (IEEE802) */
> - eth_env_set_enetaddr("ethaddr", mac_addr);
> -#endif
> -}
> -
> -static void setup_serial(void)
> -{
> -#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE)
> - const u32 cpuid_offset = 0x7;
> - const u32 cpuid_length = 0x10;
> -
> - struct udevice *dev;
> - int ret, i;
> - u8 cpuid[cpuid_length];
> - u8 low[cpuid_length/2], high[cpuid_length/2];
> - char cpuid_str[cpuid_length * 2 + 1];
> - u64 serialno;
> - char serialno_str[17];
> -
> - /* retrieve the device */
> - ret = uclass_get_device_by_driver(UCLASS_MISC,
> - DM_GET_DRIVER(rockchip_efuse), &dev);
> - if (ret) {
> - debug("%s: could not find efuse device\n", __func__);
> - return;
> - }
> -
> - /* read the cpu_id range from the efuses */
> - ret = misc_read(dev, cpuid_offset, &cpuid, sizeof(cpuid));
> - if (ret) {
> - debug("%s: reading cpuid from the efuses failed\n",
> - __func__);
> - return;
> - }
> -
> - memset(cpuid_str, 0, sizeof(cpuid_str));
> - for (i = 0; i < 16; i++)
> - sprintf(&cpuid_str[i * 2], "%02x", cpuid[i]);
> -
> - debug("cpuid: %s\n", cpuid_str);
> -
> - /*
> - * Mix the cpuid bytes using the same rules as in
> - * ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c
> - */
> - for (i = 0; i < 8; i++) {
> - low[i] = cpuid[1 + (i << 1)];
> - high[i] = cpuid[i << 1];
> - }
> -
> - serialno = crc32_no_comp(0, low, 8);
> - serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32;
> - snprintf(serialno_str, sizeof(serialno_str), "%016llx", serialno);
> -
> - env_set("cpuid#", cpuid_str);
> - env_set("serial#", serialno_str);
> -#endif
> -}
> -
> static void setup_iodomain(void)
> {
> const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3;
> @@ -198,8 +111,23 @@ static int setup_boottargets(void)
>
> int misc_init_r(void)
> {
> - setup_serial();
> - setup_macaddr();
> + const u32 cpuid_offset = 0x7;
> + const u32 cpuid_length = 0x10;
> + u8 cpuid[cpuid_length];
> + int ret;
> +
> + ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
> + if (ret)
> + return ret;
> +
> + ret = rockchip_cpuid_set(cpuid, cpuid_length);
> + if (ret)
> + return ret;
> +
> + ret = rockchip_setup_macaddr();
> + if (ret)
> + return ret;
> +
> setup_iodomain();
> setup_boottargets();
>
More information about the U-Boot
mailing list