[U-Boot] [PATCH v1 1/2] colibri_imx6/imx7/imx8x: use distroboot by default

[Igor Opaniuk]

From: Igor Opaniuk <igor.opaniuk at toradex.com>

Use distro_bootcmd as defauult bootcmd instead of legacy wrappers.

Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
---

 include/configs/colibri-imx8x.h | 1 +
 include/configs/colibri_imx6.h  | 4 ++--
 include/configs/colibri_imx7.h  | 5 +++--
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 2469066849..2b093efb2c 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -82,6 +82,7 @@
 	CONFIG_MFG_ENV_SETTINGS \
 	M4_BOOT_ENV \
 	MEM_LAYOUT_ENV_SETTINGS \
+	"boot_file=Image\0" \
 	"console=ttyLP3 earlycon\0" \
 	"fdt_addr=0x83000000\0"	\
 	"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 147f801353..a719a4eadc 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -92,6 +92,7 @@
 
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
@@ -168,8 +169,7 @@
 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
-	"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
-		"setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
+	"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
 		"usb start ; " \
 		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 49cdd61038..760e36fac9 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -109,7 +109,8 @@
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x81000000\0" \
-	"ramdisk_addr_r=0x82100000\0"
+	"ramdisk_addr_r=0x82100000\0" \
+	"scriptaddr=0x82500000\0"
 
 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
 #define SD_BOOTDEV 0
@@ -160,7 +161,7 @@
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	UBI_BOOTCMD
 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
-#define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \
+#define CONFIG_BOOTCOMMAND \
 	"setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
 #define MODULE_EXTRA_ENV_SETTINGS \
 	"variant=-emmc\0" \
-- 
2.17.1