[U-Boot] [PATCH 1/1] doc: slimbootloader: Update Linux booting steps on QEMU

[Bin Meng]

Hi Aiden,

On Mon, Aug 26, 2019 at 11:20 AM Park, Aiden <aiden.park at intel.com> wrote:
>
> Hi Bin,
>
> > -----Original Message-----
> > From: Bin Meng [mailto:bmeng.cn at gmail.com]
> > Sent: Sunday, August 25, 2019 7:36 PM
> > To: Park, Aiden <aiden.park at intel.com>
> > Cc: Andy Shevchenko <andy.shevchenko at gmail.com>; u-boot at lists.denx.de
> > Subject: Re: [PATCH 1/1] doc: slimbootloader: Update Linux booting steps on
> > QEMU
> >
> > Hi Aiden,
> >
> > On Fri, Aug 23, 2019 at 5:31 AM Park, Aiden <aiden.park at intel.com> wrote:
> > >
> > > Add steps to test Linux booting on QEMU with Yocto image.
> > >
> > > Signed-off-by: Aiden Park <aiden.park at intel.com>
> > > ---
> > >  doc/board/intel/slimbootloader.rst | 22 ++++++++++++++++++++++
> > >  1 file changed, 22 insertions(+)
> > >
> > > diff --git a/doc/board/intel/slimbootloader.rst
> > > b/doc/board/intel/slimbootloader.rst
> > > index 07c9b126f7..375e676804 100644
> > > --- a/doc/board/intel/slimbootloader.rst
> > > +++ b/doc/board/intel/slimbootloader.rst
> > > @@ -86,6 +86,28 @@ The PayloadId can be any 4 Bytes value.
> > >
> > >     $ qemu-system-x86_64 -machine q35 -nographic -serial mon:stdio
> > > -pflash Outputs/qemu/SlimBootloader.bin
> > >
> > > +Test Linux booting on QEMU target
> > > +---------------------------------
> > > +
> > > +Let's use LeafHill (APL) Yocto image for testing.
> > > +Download it from http://downloads.yoctoproject.org/releases/yocto/yocto-
> > 2.0/machines/leafhill/.
> > > +
> > > +1. Prepare Yocto hard disk image::
> > > +
> > > +   $ wget http://downloads.yoctoproject.org/releases/yocto/yocto-
> > 2.0/machines/leafhill/leafhill-4.0-jethro-2.0.tar.bz2
> > > +   $ tar -xvf leafhill-4.0-jethro-2.0.tar.bz2
> > > +   $ ls -l
> > > + leafhill-4.0-jethro-2.0/binary/core-image-sato-intel-corei7-64.hddim
> > > + g
> >
> > nits: this line is not necessary
> >
> This is just to show unzipped file path and make sure the file exists properly.
>
> > > +
> > > +2. Launch Slim Bootloader on QEMU with disk image::
> > > +
> > > +   $ qemu-system-x86_64 -machine q35 -nographic -serial mon:stdio
> > > + -pflash Outputs/qemu/SlimBootloader.bin -drive
> > > + id=mydrive,if=none,file=/path/to/core-image-sato-intel-corei7-64.hdd
> > > + img,format=raw -device ide-hd,drive=mydrive
> > > +
> > > +3. Update boot environment values on shell::
> > > +
> > > +   => setenv bootfile vmlinuz
> > > +   => setenv bootdev scsi
> > > +   => boot
> >
> > I followed all the instructions here, and I see the same problem as I reported
> > before: Invalid Boot Flag.
> >
> > => setenv bootfile vmlinuz
> > => setenv bootdev scsi
> > => boot
> > scanning bus for devices...
> > SATA link 0 timeout.
> > SATA link 1 timeout.
> > SATA link 2 timeout.
> > SATA link 3 timeout.
> > SATA link 4 timeout.
> > Target spinup took 0 ms.
> > AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
> > flags: ncq only
> > Error: Invalid Boot Flag (found 0x0000, expected 0xaa55)
> >
> This has a dependency on a patch - https://patchwork.ozlabs.org/patch/1150306/
> which is still waiting to be applied.
>

Thanks, now I am able to boot the Yocto Linux kernel image.

Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Tested-by: Bin Meng <bmeng.cn at gmail.com>

However when testing, I noticed that SlimBootloader does not support
multicore? If I passed "-smp 2" or "-smp 4" to QEMU, it failed to
boot. Logs below:

MP Init (Wakeup)
MP Init (Run)
Detected 2 CPU threads
 CPU  0 APIC ID: 0
 CPU  1 APIC ID: 1
PCI Enum
Call FspNotifyPhase(20) ... Success
ACPI Init
Less MADT entries than Number of cores..
ACPI Ret: Out of Resources
Error: Out of Resources

ACPI error !
STAGE_2: System halted!

Regards,
Bin