[U-Boot] [PATCH 2/3] imx: initialize fec only when enabled

[Peng Fan]

> Subject: [PATCH 2/3] imx: initialize fec only when enabled
> 
> board early initialize fec ethernet controller pinmux only when FEC is enabled
> 
> Signed-off-by: Parthiban Nallathambi <pn at denx.de>
> ---
>  board/phytec/pcl063/pcl063.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/board/phytec/pcl063/pcl063.c b/board/phytec/pcl063/pcl063.c
> index f8cbd1c11e..96dd9e38f3 100644
> --- a/board/phytec/pcl063/pcl063.c
> +++ b/board/phytec/pcl063/pcl063.c
> @@ -178,7 +178,9 @@ int board_phy_config(struct phy_device *phydev)
> int board_early_init_f(void)  {
>  	setup_iomux_uart();
> +#ifdef CONFIG_FEC_MXC
>  	setup_iomux_fec();
> +#endif
> 

Reviewed-by: Peng Fan <peng.fan at nxp.com>

It would be better if dm pinctrl used.

Regards,
Peng.

>  	return 0;
>  }
> --
> 2.21.0