[U-Boot] [PATCH v2 01/26] tools: imx8m_image: align spl bin image size

[Peng Fan]

> Subject: Re: [PATCH v2 01/26] tools: imx8m_image: align spl bin image size
> 
> On 19.08.19 11:42, Peng Fan wrote:
> > The loader for the DDR firmware in drivers/ddr/imx/imx8m/helper.c uses
> > a 4-byte-aligned address to load the firmware. In cases where OF is
> > enabled in SPL the dtb will be appended to the SPL binary and can
> > result in a binary that is not aligned correctly. If OF is not enabled
> > in SPL, `_end` is already aligned correctly, but this patch does not hurt.
> >
> > To ensure the correct alignment we use dd to create a temporary file
> > u-boot-spl-pad.bin with the correct padding.
> >
> > Reviewed-by: Frieder Schrempf <frieder.schrempf at kontron.de>
> 
> I think the " at " in my e-mail address should be "@" here and in all other
> patches/tags.

Sorry, it is a copy paste error. I'll fix that before send pull request to Stefano
if no other major comments.

Thanks,
Peng.

> 
> > Tested-by: Frieder Schrempf <frieder.schrempf at kontron.de>
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > ---
> >   tools/imx8m_image.sh | 5 +++--
> >   1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/tools/imx8m_image.sh b/tools/imx8m_image.sh index
> > ec0881a128..08a6a48180 100755
> > --- a/tools/imx8m_image.sh
> > +++ b/tools/imx8m_image.sh
> > @@ -35,8 +35,9 @@ if [ $post_process = 1 ]; then
> >   		objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0
> $srctree/lpddr4_pmu_train_2d_imem.bin
> lpddr4_pmu_train_2d_imem_pad.bin
> >   		cat lpddr4_pmu_train_1d_imem_pad.bin
> lpddr4_pmu_train_1d_dmem_pad.bin > lpddr4_pmu_train_1d_fw.bin
> >   		cat lpddr4_pmu_train_2d_imem_pad.bin
> $srctree/lpddr4_pmu_train_2d_dmem.bin > lpddr4_pmu_train_2d_fw.bin
> > -		cat spl/u-boot-spl.bin lpddr4_pmu_train_1d_fw.bin
> lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin
> > -		rm -f lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin
> lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin
> lpddr4_pmu_train_2d_imem_pad.bin
> > +		dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin bs=4 conv=sync
> > +		cat spl/u-boot-spl-pad.bin lpddr4_pmu_train_1d_fw.bin
> lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin
> > +		rm -f lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin
> > +lpddr4_pmu_train_1d_imem_pad.bin
> lpddr4_pmu_train_1d_dmem_pad.bin
> > +lpddr4_pmu_train_2d_imem_pad.bin spl/u-boot-spl-pad.bin
> >   	fi
> >   fi
> >
> >