[U-Boot] [PATCH v2 00/26] i.MX8MM support
Peng Fan
peng.fan at nxp.com
Tue Aug 27 01:08:43 UTC 2019
> Subject: Re: [PATCH v2 00/26] i.MX8MM support
>
> On 19.08.19 11:42, Peng Fan wrote:
> > V2:
> > Fixed comments from Lukasz and Frieder
>
> This set has 26 patches, while the previous version had 22. You should
> document all changes here, so one can easily figure out which patches were
> added/removed/merged/split.
The following 4 are new added. I'll address your comments and send out v3.
imx8m: imx-regs: drop unused register definitions
imx8m: restrict reset_cpu
imx: mmc_env: update runtime SD/MMC boot env device
imx8m: soc: probe clock device in arch_cpu_init_dm
Thanks,
Peng.
>
> >
> > V1:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fcover%2F1144326%2F&data=02%7C01%7Cpeng.fa
> n%40nx
> >
> p.com%7C1809390d35d9451070f208d72a378af1%7C686ea1d3bc2b4c6fa92c
> d99c5c3
> >
> 01635%7C0%7C0%7C637024290371709641&sdata=kZkJN9G%2F4vZu5c
> RqzHxMWS0
> > 6DENq9y2yUSZVjTfUjyY%3D&reserved=0
> > This is a splitted and updated patch from
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fcover%2F1128799%2F&data=02%7C01%7Cpeng.fa
> n%40nxp.com%7C1809390d35d9451070f208d72a378af1%7C686ea1d3bc2b4
> c6fa92cd99c5c301635%7C0%7C0%7C637024290371709641&sdata=oh
> OMPQavonAd22u4tFvQTNQzOq%2FWr5YsZlZ3DfEGWRM%3D&reserved
> =0 which is to support both i.MX8MM and i.MX8MN.
> >
> > There is a README added, following that to test if you would like to.
> >
> > Peng Fan (25):
> > tools: imx8m_image: align spl bin image size
> > ddr: imx8m: fix ddr firmware location when enable SPL OF
> > imx8m: add image cfg for i.MX8MM lpddr4
> > imx: add IMX8MQ kconfig entry
> > imx: add IMX8MM kconfig entry
> > imx: imx8mm: add clock bindings header
> > imx: add i.MX8MM cpu type
> > imx: spl: add spl_board_boot_device for i.MX8MM
> > imx8m: imx-regs: drop unused register definitions
> > imx8m: update imx-regs for i.MX8MM
> > imx: add get_cpu_rev support for i.MX8MM
> > imx8m: add pin header for i.MX8MM
> > imx: add i.MX8MM PE property
> > imx8m: Fix MMU table issue for OPTEE memory
> > imx8m: set BYPASS ID SWAP to avoid AXI bus errors
> > imx8m: soc: enable SCTR clock before timer init
> > imx8m: restrict reset_cpu
> > imx8m: rename clock to clock_imx8mq
> > imx8m: restructure clock.h
> > imx8m: add clk support for i.MX8MM
> > imx: mmc_env: update runtime SD/MMC boot env device
> > imx8m: soc: probe clock device in arch_cpu_init_dm
> > arm: dts: import i.MX8MM dtsi
> > arm: dts: add i.MX8MM pin func
> > imx: Add i.MX8MM EVK board support.
> >
> > Ye Li (1):
> > imx8m: Configure trustzone region 0 for non-secure access
> >
> > arch/arm/dts/Makefile | 3 +-
> > arch/arm/dts/imx8mm-evk-u-boot.dtsi | 92 +
> > arch/arm/dts/imx8mm-evk.dts | 235 +++
> > arch/arm/dts/imx8mm-pinfunc.h | 629
> +++++++
> > arch/arm/dts/imx8mm.dtsi | 733
> ++++++++
> > arch/arm/include/asm/arch-imx/cpu.h | 6 +
> > arch/arm/include/asm/arch-imx8m/clock.h | 491 +----
> > arch/arm/include/asm/arch-imx8m/clock_imx8mm.h | 387
> ++++
> > arch/arm/include/asm/arch-imx8m/clock_imx8mq.h | 424
> +++++
> > arch/arm/include/asm/arch-imx8m/imx-regs.h | 291 +--
> > arch/arm/include/asm/arch-imx8m/imx8mm_pins.h | 691
> +++++++
> > arch/arm/include/asm/mach-imx/iomux-v3.h | 4 +
> > arch/arm/include/asm/mach-imx/sys_proto.h | 8 +
> > arch/arm/mach-imx/cpu.c | 12 +
> > arch/arm/mach-imx/imx8m/Kconfig | 17 +-
> > arch/arm/mach-imx/imx8m/Makefile | 4 +-
> > arch/arm/mach-imx/imx8m/clock_imx8mm.c | 306
> +++
> > .../arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} | 5 +-
> > arch/arm/mach-imx/imx8m/clock_slice.c | 63 +
> > arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg | 16 +
> > arch/arm/mach-imx/imx8m/soc.c | 129 +-
> > arch/arm/mach-imx/mmc_env.c | 3 +
> > arch/arm/mach-imx/spl.c | 8 +
> > board/freescale/imx8mm_evk/Kconfig | 12 +
> > board/freescale/imx8mm_evk/MAINTAINERS | 6 +
> > board/freescale/imx8mm_evk/Makefile | 12 +
> > board/freescale/imx8mm_evk/imx8mm_evk.c | 45 +
> > board/freescale/imx8mm_evk/lpddr4_timing.c | 1980
> ++++++++++++++++++++
> > board/freescale/imx8mm_evk/spl.c | 129 ++
> > configs/imx8mm_evk_defconfig | 74 +
> > drivers/ddr/imx/imx8m/helper.c | 12 +-
> > include/configs/imx8mm_evk.h | 153 ++
> > include/dt-bindings/clock/imx8mm-clock.h | 253 +++
> > tools/imx8m_image.sh | 5 +-
> > 34 files changed, 6535 insertions(+), 703 deletions(-)
> > create mode 100644 arch/arm/dts/imx8mm-evk-u-boot.dtsi
> > create mode 100644 arch/arm/dts/imx8mm-evk.dts
> > create mode 100644 arch/arm/dts/imx8mm-pinfunc.h
> > create mode 100644 arch/arm/dts/imx8mm.dtsi
> > create mode 100644
> arch/arm/include/asm/arch-imx8m/clock_imx8mm.h
> > create mode 100644
> arch/arm/include/asm/arch-imx8m/clock_imx8mq.h
> > create mode 100644
> arch/arm/include/asm/arch-imx8m/imx8mm_pins.h
> > create mode 100644 arch/arm/mach-imx/imx8m/clock_imx8mm.c
> > rename arch/arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} (99%)
> > create mode 100644
> arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg
> > create mode 100644 board/freescale/imx8mm_evk/Kconfig
> > create mode 100644 board/freescale/imx8mm_evk/MAINTAINERS
> > create mode 100644 board/freescale/imx8mm_evk/Makefile
> > create mode 100644 board/freescale/imx8mm_evk/imx8mm_evk.c
> > create mode 100644 board/freescale/imx8mm_evk/lpddr4_timing.c
> > create mode 100644 board/freescale/imx8mm_evk/spl.c
> > create mode 100644 configs/imx8mm_evk_defconfig
> > create mode 100644 include/configs/imx8mm_evk.h
> > create mode 100644 include/dt-bindings/clock/imx8mm-clock.h
> >
More information about the U-Boot
mailing list