[U-Boot] [PATCH v2] i2c: mxc: add CONFIG_CLK support

[Peng Fan]

Hi Heiko,

> Subject: [PATCH v2] i2c: mxc: add CONFIG_CLK support

Would you pick up this patch?

Thanks,
Peng.

> 
> When CONFIG_CLK enabled, use CLK UCLASS for clk related settings.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
> 
> V2:
>  use clk_get_rate when getting i2c per clk rate with CLK UCLASS
> 
>  arch/arm/include/asm/mach-imx/mxc_i2c.h |  6 ++++++
>  drivers/i2c/mxc_i2c.c                   | 22
> ++++++++++++++++++++++
>  2 files changed, 28 insertions(+)
> 
> diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h
> b/arch/arm/include/asm/mach-imx/mxc_i2c.h
> index 8e1ea9af19..81fd981444 100644
> --- a/arch/arm/include/asm/mach-imx/mxc_i2c.h
> +++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h
> @@ -6,6 +6,9 @@
>  #define __ASM_ARCH_MXC_MXC_I2C_H__
>  #include <asm-generic/gpio.h>
>  #include <asm/mach-imx/iomux-v3.h>
> +#if CONFIG_IS_ENABLED(CLK)
> +#include <clk.h>
> +#endif
> 
>  struct i2c_pin_ctrl {
>  	iomux_v3_cfg_t i2c_mode;
> @@ -47,6 +50,9 @@ struct mxc_i2c_bus {
>  	ulong driver_data;
>  	int speed;
>  	struct i2c_pads_info *pads_info;
> +#if CONFIG_IS_ENABLED(CLK)
> +	struct clk per_clk;
> +#endif
>  #ifndef CONFIG_DM_I2C
>  	int (*idle_bus_fn)(void *p);
>  	void *idle_bus_data;
> diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index
> 23119cce65..8d6b4650ff 100644
> --- a/drivers/i2c/mxc_i2c.c
> +++ b/drivers/i2c/mxc_i2c.c
> @@ -149,7 +149,12 @@ static uint8_t i2c_imx_get_clk(struct mxc_i2c_bus
> *i2c_bus, unsigned int rate)  #endif
> 
>  	/* Divider value calculation */
> +#if CONFIG_IS_ENABLED(CLK)
> +	i2c_clk_rate = clk_get_rate(&i2c_bus->per_clk); #else
>  	i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK);
> +#endif
> +
>  	div = (i2c_clk_rate + rate - 1) / rate;
>  	if (div < i2c_clk_div[0][0])
>  		clk_div = 0;
> @@ -890,9 +895,22 @@ static int mxc_i2c_probe(struct udevice *bus)
>  	i2c_bus->bus = bus;
> 
>  	/* Enable clk */
> +#if CONFIG_IS_ENABLED(CLK)
> +	ret = clk_get_by_index(bus, 0, &i2c_bus->per_clk);
> +	if (ret) {
> +		printf("Failed to get i2c clk\n");
> +		return ret;
> +	}
> +	ret = clk_enable(&i2c_bus->per_clk);
> +	if (ret) {
> +		printf("Failed to enable i2c clk\n");
> +		return ret;
> +	}
> +#else
>  	ret = enable_i2c_clk(1, bus->seq);
>  	if (ret < 0)
>  		return ret;
> +#endif
> 
>  	/*
>  	 * See Documentation/devicetree/bindings/i2c/i2c-imx.txt
> @@ -919,7 +937,11 @@ static int mxc_i2c_probe(struct udevice *bus)
>  	ret = i2c_idle_bus(i2c_bus);
>  	if (ret < 0) {
>  		/* Disable clk */
> +#if CONFIG_IS_ENABLED(CLK)
> +		clk_disable(&i2c_bus->per_clk);
> +#else
>  		enable_i2c_clk(0, bus->seq);
> +#endif
>  		return ret;
>  	}
> 
> --
> 2.16.4