[U-Boot] [PATCHv2 00/14] powerpc: Enable device tree support

[Prabhakar Kushwaha]

> -----Original Message-----
> From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> Sent: Tuesday, August 20, 2019 3:05 PM
> To: u-boot at lists.denx.de; Prabhakar Kushwaha
> <prabhakar.kushwaha at nxp.com>; wd at denx.de; Shengzhou Liu
> <shengzhou.liu at nxp.com>; Priyanka Jain <priyanka.jain at nxp.com>;
> sjg at chromium.org; marek.vasut+renesas at gmail.com; sr at denx.de; Jagdish
> Gediya <jagdish.gediya at nxp.com>; bmeng.cn at gmail.com; York Sun
> <york.sun at nxp.com>; Jiafei Pan <jiafei.pan at nxp.com>; Xiaowei Bao
> <xiaowei.bao at nxp.com>
> Cc: Z.q. Hou <zhiqiang.hou at nxp.com>
> Subject: [PATCHv2 00/14] powerpc: Enable device tree support
> 
> This patch is to enable device tree support for the Freescale PowerPC platforms
> below.
> 
> Hou Zhiqiang (14):
>   powerpc: mpc85xx: Add device tree support option for PBL boot image
>   powerpc: Enable device tree support for T2080RDB
>   powerpc: Enable device tree support for T4240RDB
>   powerpc: Enable device tree support for T1024RDB
>   powerpc: Enable device tree support for T1042D4RDB
>   powerpc: Enable device tree support for P1020RDB
>   powerpc: Enable device tree support for P2020RDB
>   powerpc: Enable device tree support for P2041RDB
>   powerpc: Enable device tree support for P3041DS
>   powerpc: Enable device tree support for P4080DS
>   powerpc: Enable device tree support for P5040DS
>   powerpc: dts: add default definition of CONFIG_RESET_VECTOR_ADDRESS
>   powerpc: mpc8548cds: extend the reserved length for monitor
>   powerpc: Enable device tree support for MPC8548CDS
> 

This patch has been applied to u-boot-mpc85xx, awaiting upstream.

--pk