[U-Boot] [PATCH 24/26] dts: mtmips: add default pinctrl to eth nodes for all boards

[Stefan Roese]

On 28.08.19 08:38, Weijie Gao wrote:
> This patch adds a referenceable name to eth node, and adds default pinctrl
> for all boards.
> 
> There are two pinctrl nodes used for two scenarios:
> ephy_iot_mode    - for IOT boards which have only one port (PHY0)
> ephy_router_mode - For routers which have more than one ports
> 
> Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>

Again my comment about staying in sync with the Linux DT bindings. It might
be that case, that Linux is still missing some defines for the pinctrl (like
this IOT one).

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan


> ---
>   arch/mips/dts/gardena-smart-gateway-mt7688.dts | 5 +++++
>   arch/mips/dts/linkit-smart-7688.dts            | 5 +++++
>   arch/mips/dts/mt7628a.dtsi                     | 2 +-
>   3 files changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/mips/dts/gardena-smart-gateway-mt7688.dts b/arch/mips/dts/gardena-smart-gateway-mt7688.dts
> index 8a9b8227b7..1a2629ad9d 100644
> --- a/arch/mips/dts/gardena-smart-gateway-mt7688.dts
> +++ b/arch/mips/dts/gardena-smart-gateway-mt7688.dts
> @@ -121,3 +121,8 @@
>   		reg = <1>;
>   	};
>   };
> +
> +&eth {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ephy_iot_mode>;
> +};
> diff --git a/arch/mips/dts/linkit-smart-7688.dts b/arch/mips/dts/linkit-smart-7688.dts
> index 7dbd909d00..aca1ec8c70 100644
> --- a/arch/mips/dts/linkit-smart-7688.dts
> +++ b/arch/mips/dts/linkit-smart-7688.dts
> @@ -51,3 +51,8 @@
>   		reg = <0>;
>   	};
>   };
> +
> +&eth {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ephy_iot_mode>;
> +};
> diff --git a/arch/mips/dts/mt7628a.dtsi b/arch/mips/dts/mt7628a.dtsi
> index 929397c729..f13b539242 100644
> --- a/arch/mips/dts/mt7628a.dtsi
> +++ b/arch/mips/dts/mt7628a.dtsi
> @@ -352,7 +352,7 @@
>   		};
>   	};
>   
> -	eth at 10110000 {
> +	eth: eth at 10110000 {
>   		compatible = "mediatek,mt7628-eth";
>   		reg = <0x10100000 0x10000
>   		       0x10110000 0x8000>;
> 

Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de