[U-Boot] [PATCH V3 0/6] bmips: add brcmnand support

[Álvaro Fernández Rojas]

These patches add support for brcmnand on bmips.
The current brcmnand driver only supports controller >= 4.0,
which means that only BCM63268 works right now.

v3: Introduce changes suggested by Daniel Schwierzeck:
 - Introduce soc_to_priv helper definition.
 - Switch to dev_remap_addr_name.
v2: Drop CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT

Álvaro Fernández Rojas (6):
  nand: brcm: add BCM6368 support
  bmips: bcm6368: add support for brcmnand
  bmips: bcm6328: add support for brcmnand
  bmips: bcm6362: add support for brcmnand
  bmips: bcm63268: add support for brcmnand
  bmips: enable vr-3032u nand support

 arch/mips/dts/brcm,bcm63268.dtsi             |  18 +++
 arch/mips/dts/brcm,bcm6328.dtsi              |  16 +++
 arch/mips/dts/brcm,bcm6362.dtsi              |  18 +++
 arch/mips/dts/brcm,bcm6368.dtsi              |  18 +++
 arch/mips/dts/comtrend,vr-3032u.dts          |  13 +++
 configs/comtrend_vr3032u_ram_defconfig       |   5 +
 drivers/mtd/nand/raw/Kconfig                 |   6 +
 drivers/mtd/nand/raw/brcmnand/Makefile       |   1 +
 drivers/mtd/nand/raw/brcmnand/bcm6368_nand.c | 117 +++++++++++++++++++
 include/configs/comtrend_vr3032u.h           |   5 +
 10 files changed, 217 insertions(+)
 create mode 100644 drivers/mtd/nand/raw/brcmnand/bcm6368_nand.c

-- 
2.20.1