[U-Boot] [PATCH V3 6/6] bmips: enable vr-3032u nand support

[Álvaro Fernández Rojas]

Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
 v3: no changes
 v2: Drop CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT

 arch/mips/dts/comtrend,vr-3032u.dts    | 13 +++++++++++++
 configs/comtrend_vr3032u_ram_defconfig |  5 +++++
 include/configs/comtrend_vr3032u.h     |  5 +++++
 3 files changed, 23 insertions(+)

diff --git a/arch/mips/dts/comtrend,vr-3032u.dts b/arch/mips/dts/comtrend,vr-3032u.dts
index 512cb52de3..110119b507 100644
--- a/arch/mips/dts/comtrend,vr-3032u.dts
+++ b/arch/mips/dts/comtrend,vr-3032u.dts
@@ -99,6 +99,19 @@
 	};
 };
 
+&nand {
+	status = "okay";
+
+	nandcs at 0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-strength = <15>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		brcm,nand-oob-sector-size = <64>;
+	};
+};
+
 &ohci {
 	status = "okay";
 };
diff --git a/configs/comtrend_vr3032u_ram_defconfig b/configs/comtrend_vr3032u_ram_defconfig
index 013c9ee1f6..33be24c45b 100644
--- a/configs/comtrend_vr3032u_ram_defconfig
+++ b/configs/comtrend_vr3032u_ram_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_LICENSE=y
 CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -37,6 +38,10 @@ CONFIG_DM_GPIO=y
 CONFIG_LED=y
 CONFIG_LED_BCM6328=y
 CONFIG_LED_BLINK=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_6368=y
 CONFIG_DM_ETH=y
 CONFIG_BCM6368_ETH=y
 CONFIG_PHY=y
diff --git a/include/configs/comtrend_vr3032u.h b/include/configs/comtrend_vr3032u.h
index e183288c5d..d625101ecb 100644
--- a/include/configs/comtrend_vr3032u.h
+++ b/include/configs/comtrend_vr3032u.h
@@ -10,3 +10,8 @@
 
 #define CONFIG_ENV_SIZE			(8 * 1024)
 
+#ifdef CONFIG_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#endif /* CONFIG_NAND */
-- 
2.20.1