[U-Boot] [PATCH 20/26] mmc: mtk-sd: add support for MediaTek MT7620/MT7628 SoCs
Weijie Gao
weijie.gao at mediatek.com
Thu Aug 29 04:28:02 UTC 2019
On Wed, 2019-08-28 at 15:50 +0200, Stefan Roese wrote:
> On 28.08.19 08:38, Weijie Gao wrote:
> > This patch adds mmc support for MediaTek MT7620/MT7628 SoCs.
> >
> > Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
> > ---
> > drivers/mmc/Kconfig | 2 +-
> > drivers/mmc/mtk-sd.c | 23 ++++++++++++++++++++---
> > 2 files changed, 21 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> > index 0ccb1ea701..564310b293 100644
> > --- a/drivers/mmc/Kconfig
> > +++ b/drivers/mmc/Kconfig
> > @@ -671,7 +671,7 @@ config FTSDC010_SDIO
> >
> > config MMC_MTK
> > bool "MediaTek SD/MMC Card Interface support"
> > - depends on ARCH_MEDIATEK
> > + depends on (ARCH_MEDIATEK || ARCH_MTMIPS)
>
> AFAIK, the braces are not necessary.
>
> Thanks,
> Stefan
>
> > depends on BLK && DM_MMC
> > depends on OF_CONTROL
> > help
> > diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c
> > index f555357af2..7069fe8948 100644
> > --- a/drivers/mmc/mtk-sd.c
> > +++ b/drivers/mmc/mtk-sd.c
> > @@ -217,6 +217,7 @@ struct mtk_sd_regs {
> >
> > struct msdc_compatible {
> > u8 clk_div_bits;
> > + u8 sclk_cycle_shift;
> > bool pad_tune0;
> > bool async_fifo;
> > bool data_tune;
> > @@ -664,7 +665,7 @@ static int msdc_ops_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
> >
> > static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
> > {
> > - u32 timeout, clk_ns;
> > + u32 timeout, clk_ns, shift;
> > u32 mode = 0;
> >
> > host->timeout_ns = ns;
> > @@ -673,10 +674,11 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
> > if (host->sclk == 0) {
> > timeout = 0;
> > } else {
> > + shift = host->dev_comp->sclk_cycle_shift;
> > clk_ns = 1000000000UL / host->sclk;
> > timeout = (ns + clk_ns - 1) / clk_ns + clks;
> > /* unit is 1048576 sclk cycles */
> > - timeout = (timeout + (0x1 << 20) - 1) >> 20;
> > + timeout = (timeout + (0x1 << shift) - 1) >> shift;
> > if (host->dev_comp->clk_div_bits == 8)
> > mode = (readl(&host->base->msdc_cfg) &
> > MSDC_CFG_CKMOD_M) >> MSDC_CFG_CKMOD_S;
> > @@ -1301,7 +1303,7 @@ static int msdc_drv_probe(struct udevice *dev)
> >
> > host->mmc = &plat->mmc;
> > host->timeout_ns = 100000000;
> > - host->timeout_clks = 3 * 1048576;
> > + host->timeout_clks = 3 * (1 << host->dev_comp->sclk_cycle_shift);
> >
> > #ifdef CONFIG_PINCTRL
> > pinctrl_select_state(dev, "default");
> > @@ -1374,8 +1376,20 @@ static const struct dm_mmc_ops msdc_ops = {
> > #endif
> > };
> >
> > +static const struct msdc_compatible mt7620_compat = {
> > + .clk_div_bits = 8,
> > + .sclk_cycle_shift = 16,
> > + .pad_tune0 = false,
> > + .async_fifo = false,
> > + .data_tune = false,
> > + .busy_check = false,
> > + .stop_clk_fix = false,
> > + .enhance_rx = false
> > +};
> > +
> > static const struct msdc_compatible mt7623_compat = {
> > .clk_div_bits = 12,
> > + .sclk_cycle_shift = 20,
> > .pad_tune0 = true,
> > .async_fifo = true,
> > .data_tune = true,
> > @@ -1386,6 +1400,7 @@ static const struct msdc_compatible mt7623_compat = {
> >
> > static const struct msdc_compatible mt8516_compat = {
> > .clk_div_bits = 12,
> > + .sclk_cycle_shift = 20,
> > .pad_tune0 = true,
> > .async_fifo = true,
> > .data_tune = true,
> > @@ -1395,6 +1410,7 @@ static const struct msdc_compatible mt8516_compat = {
> >
> > static const struct msdc_compatible mt8183_compat = {
> > .clk_div_bits = 12,
> > + .sclk_cycle_shift = 20,
> > .pad_tune0 = true,
> > .async_fifo = true,
> > .data_tune = true,
> > @@ -1403,6 +1419,7 @@ static const struct msdc_compatible mt8183_compat = {
> > };
> >
> > static const struct udevice_id msdc_ids[] = {
> > + { .compatible = "mediatek,mt7620-mmc", .data = (ulong)&mt7620_compat },
> > { .compatible = "mediatek,mt7623-mmc", .data = (ulong)&mt7623_compat },
> > { .compatible = "mediatek,mt8516-mmc", .data = (ulong)&mt8516_compat },
> > { .compatible = "mediatek,mt8183-mmc", .data = (ulong)&mt8183_compat },
> >
>
> Viele Grüße,
> Stefan
>
I'll remove these braces.
More information about the U-Boot
mailing list