[U-Boot] [PATCH v2] imx: support i.MX8QM ROM 7720 a1 board

[Oliver Graute]

On 30/08/19, Peng Fan wrote:
> > Subject: Re: [PATCH v2] imx: support i.MX8QM ROM 7720 a1 board
> > 
> > On 30/08/19, Peng Fan wrote:
> > > > Subject: [PATCH v2] imx: support i.MX8QM ROM 7720 a1 board
> > > >
> > > > Add i.MX8QM ROM 7720a1 board support
> > > >
> > > > Boot log as below:
> > > > U-Boot 2019.07-00001-g6c912ea4d4 (Aug 28 2019 - 13:01:45 +0200)
> > > >
> > > > CPU:   NXP i.MX8QM RevB A53 at 1200 MHz
> > > >
> > > > Model: Advantech iMX8QM Qseven series
> > > > Board: ROM-7720-A1 4GB
> > > > Build: SCFW 65afe5f6
> > > > Boot:  SD2
> > > > DRAM:  3.9 GiB
> > > > MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> > > > Loading Environment from MMC... OK
> > > > In:    serial at 5a060000
> > > > Out:   serial at 5a060000
> > > > Err:   serial at 5a060000
> > > > Net:   eth0: ethernet at 5b040000Could not get PHY for FEC1: addr 1
> > > > , eth-1: ethernet at 5b050000
> > > > Hit any key to stop autoboot:  0
> > > >
> > > > Signed-off-by: Oliver Graute <oliver.graute at kococonnector.com>
> > > > Cc: Stefano Babic <sbabic at denx.de>
> > > > Cc: Fabio Estevam <festevam at gmail.com>
> > > > Cc: Peng Fan <peng.fan at nxp.com>
> > > > Cc: Simon Glass <sjg at chromium.org>
> > > > Cc: Ye Li <ye.li at nxp.com>
> > > > Cc: uboot-imx <uboot-imx at nxp.com>
> > > > ---
> > > >
> > > > These changes are based on this vendor tree:
> > >
> > > Please use imx/master or upstream master branch for your development.
> > 
> > ok I can apply the Patch on imx custodian tree. But I run into some wired
> > linking errors. For the first there exist already a patch from Igor which is not
> > applied in tree yet.
> > 
> > 
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.d
> > enx.de%2Fpipermail%2Fu-boot%2F2019-August%2F380468.html&data=
> > 02%7C01%7Cpeng.fan%40nxp.com%7Cdb77a2fa070947d5750f08d72d1f91c8
> > %7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637027485924189
> > 364&sdata=5C0gakvz584z8HUpPfp1NZ4YhW9etYixErARrEQwr8s%3D&a
> > mp;reserved=0
> > 
> > The next errors are multiple defintions of some functions:
> > 
> > drivers/mmc/fsl_esdhc_imx.o: In function `fdt_fixup_esdhc':
> > /home/graute/test/u-boot-imx/drivers/mmc/fsl_esdhc_imx.c:1382: multiple
> > definition of `fdt_fixup_esdhc'
> 
> Please not enable FSL_ESDHC and FSL_ESDHC_IMX both. Only FSL_ESDHC_IMX is
> ok.

thx for the fast reply. That hint worked.

Best regards,

Oliver