[U-Boot] [PATCH 3/3] rockchip: clk: rk3399: allow requests for all UART clocks

[Kever Yang]

On 05/27/2019 02:48 PM, Kever Yang wrote:
>
> On 05/07/2019 04:58 PM, Christoph Muellner wrote:
>> This patch adds the rate for UART1 and UART3 the same way
>> as already implemented for UART0 and UART2.
>>
>> This is required for boards, which have their console output
>> on these UARTs.
>>
>> Signed-off-by: Christoph Muellner <christoph.muellner at theobroma-systems.com>
> Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Applied to u-boot-rockchip/master, thanks!

>
> Thanks,
> - Kever
>> ---
>>
>>  drivers/clk/rockchip/clk_rk3399.c | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
>> index 93a652e5ff..aa6a8ad1c9 100644
>> --- a/drivers/clk/rockchip/clk_rk3399.c
>> +++ b/drivers/clk/rockchip/clk_rk3399.c
>> @@ -912,7 +912,9 @@ static ulong rk3399_clk_get_rate(struct clk *clk)
>>  		rate = rk3399_spi_get_clk(priv->cru, clk->id);
>>  		break;
>>  	case SCLK_UART0:
>> +	case SCLK_UART1:
>>  	case SCLK_UART2:
>> +	case SCLK_UART3:
>>  		return 24000000;
>>  		break;
>>  	case PCLK_HDMI_CTRL:
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot