[U-Boot] [PATCH 2/3] rk3399: nanopi4: Enable TPL

Kever Yang kever.yang at rock-chips.com
Sat Jun 1 02:39:14 UTC 2019



On 05/29/2019 04:02 PM, Kever Yang wrote:
> Hi Jagan,
>
>
> On 05/09/2019 06:57 PM, Jagan Teki wrote:
>> Enable TPL for NanoPC T4, NanoPI M4 boards.
>>
>> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>
> Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Applied to u-boot-rockchip/master, thanks!

>
> Thanks,
> - Kever
>> ---
>>  configs/nanopc-t4-rk3399_defconfig | 7 ++++---
>>  configs/nanopi-m4-rk3399_defconfig | 7 ++++---
>>  2 files changed, 8 insertions(+), 6 deletions(-)
>>
>> diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
>> index d9f2137b4c..9b7e15d63a 100644
>> --- a/configs/nanopc-t4-rk3399_defconfig
>> +++ b/configs/nanopc-t4-rk3399_defconfig
>> @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
>>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
>>  CONFIG_SYS_MALLOC_F_LEN=0x4000
>>  CONFIG_ROCKCHIP_RK3399=y
>> -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
>> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
>>  CONFIG_DEBUG_UART_BASE=0xFF1A0000
>>  CONFIG_DEBUG_UART_CLOCK=24000000
>>  CONFIG_SPL_STACK_R_ADDR=0x80000
>> @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1
>>  CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
>>  # CONFIG_DISPLAY_CPUINFO is not set
>>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>> -CONFIG_SPL_TEXT_BASE=0xff8c2000
>>  CONFIG_SPL_STACK_R=y
>> -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
>> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>>  CONFIG_CMD_BOOTZ=y
>>  CONFIG_CMD_GPT=y
>>  CONFIG_CMD_MMC=y
>> @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y
>>  CONFIG_CMD_USB=y
>>  # CONFIG_CMD_SETEXPR is not set
>>  CONFIG_CMD_TIME=y
>> +CONFIG_TPL=y
>>  CONFIG_SPL_OF_CONTROL=y
>>  CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4"
>>  CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>> @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y
>>  CONFIG_USB_ETHER_RTL8152=y
>>  CONFIG_USB_ETHER_SMSC95XX=y
>>  CONFIG_USE_TINY_PRINTF=y
>> +CONFIG_SPL_TINY_MEMSET=y
>>  CONFIG_ERRNO_STR=y
>> diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
>> index c2832788f0..92e70dd939 100644
>> --- a/configs/nanopi-m4-rk3399_defconfig
>> +++ b/configs/nanopi-m4-rk3399_defconfig
>> @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
>>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
>>  CONFIG_SYS_MALLOC_F_LEN=0x4000
>>  CONFIG_ROCKCHIP_RK3399=y
>> -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
>> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
>>  CONFIG_DEBUG_UART_BASE=0xFF1A0000
>>  CONFIG_DEBUG_UART_CLOCK=24000000
>>  CONFIG_SPL_STACK_R_ADDR=0x80000
>> @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1
>>  CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
>>  # CONFIG_DISPLAY_CPUINFO is not set
>>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>> -CONFIG_SPL_TEXT_BASE=0xff8c2000
>>  CONFIG_SPL_STACK_R=y
>> -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
>> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>>  CONFIG_CMD_BOOTZ=y
>>  CONFIG_CMD_GPT=y
>>  CONFIG_CMD_MMC=y
>> @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y
>>  CONFIG_CMD_USB=y
>>  # CONFIG_CMD_SETEXPR is not set
>>  CONFIG_CMD_TIME=y
>> +CONFIG_TPL=y
>>  CONFIG_SPL_OF_CONTROL=y
>>  CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4"
>>  CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>> @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y
>>  CONFIG_USB_ETHER_RTL8152=y
>>  CONFIG_USB_ETHER_SMSC95XX=y
>>  CONFIG_USE_TINY_PRINTF=y
>> +CONFIG_SPL_TINY_MEMSET=y
>>  CONFIG_ERRNO_STR=y
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>





More information about the U-Boot mailing list