[U-Boot] [PATCH] net: davinci_emac: convert to using the driver model
Adam Ford
aford173 at gmail.com
Sat Jun 1 03:24:27 UTC 2019
On Fri, May 31, 2019 at 4:21 PM Adam Ford <aford173 at gmail.com> wrote:
>
> On Fri, May 31, 2019 at 3:38 PM Adam Ford <aford173 at gmail.com> wrote:
> >
> > On Fri, May 31, 2019 at 3:11 PM Adam Ford <aford173 at gmail.com> wrote:
> > >
> > > On Fri, May 31, 2019 at 1:24 PM Adam Ford <aford173 at gmail.com> wrote:
> > > >
> > > > On Fri, May 31, 2019 at 8:32 AM Bartosz Golaszewski <brgl at bgdev.pl> wrote:
> > > > >
> > > > > From: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> > > > >
> > > > > Now that we removed all legacy boards selecting TI_EMAC we can
> > > > > completely convert the driver code to using the driver model.
> > > > > This patch also updates all remaining users of davinci_emac.
> > > >
> > > > Nice job on the da850, it works perfectly. Unfortunately, it crashes
> > > > the am3517_evm
> > > >
> > > > Without your patch, I am able to get an IP address, but when I apply
> > > > your patch and attempt an IP address, it crashes. I tried again, but
> > > > I got the same result:
> > > >
> > > >
> > > > U-Boot 2019.07-rc3-05342-gebd2f49298 (May 31 2019 - 13:18:29 -0500)
> > > >
> > > > AM35XX-GP ES2.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 MHz
> > > > Model: TI AM3517 EVM (AM3517/05 TMDSEVM3517)
> > > > AM3517EVM Board + LPDDR/NAND
> > > > DRAM: 256 MiB
> > > > NAND: 512 MiB
> > > > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
> > > > Loading Environment from NAND... OK
> > > > In: serial at 49020000
> > > > Out: serial at 49020000
> > > > Err: serial at 49020000
> > > > OMAP die ID: 3a5c000100000000016096fa04011001
> > > > Net: eth0: ethernet at 5c000000
> > > > Hit any key to stop autoboot: 0
> > > > AM3517_EVM # dhcp
> > > > BOOTP broadcast 1
> > > > data abort
> > > > pc : [<8ffac38e>] lr : [<8ffabe3b>]
> > > > reloc pc : [<8015738e>] lr : [<80156e3b>]
> > > > sp : 8df255b0 ip : 000000ff fp : 8ffeea70
> > > > r10: 8ffecbc8 r9 : 8df34ec8 r8 : 00000000
> > > > r7 : 0000ffff r6 : 00000fff r5 : 00000d88 r4 : 0000ffff
> > > > r3 : 0000ffff r2 : 00000156 r1 : 00000fff r0 : 00000fff
> > > > Flags: nZCv IRQs off FIQs off Mode SVC_32
> > > > Code: 46304638 ea410a21 b2892104 bf084299 (7b2c4631)
> > > > Resetting CPU ...
> > > >
> > > > resetting ...
> > > >
> > > >
> > > > adam
> > >
> > > I got it to work 'once' so I think we might have a timing issue, but I
> > > am not sure. I'm trying to enable various debug messages. I was
> > > hoping it would be a simple fix, but it's not turning out that way.
> > >
> >
> > I enabled the debug code in the bootp driver and got:
> >
> > AM3517_EVM # dhcp
> > BOOTP broadcast 1
> > DHCPHandler: got packet: (src=67, dst=68, len=300) state: 3
> > Filtering pkt = 0
> > DHCPHandler: got DHCP packet: (src=67, dst=68, len=300) state: 3
> > DHCP: state=SELECTING bp_file: ""
> > TRANSITIONING TO REQUESTING STATE
> > dhcp_send_request_packet: Sending DHCPREQUEST
> > Transmitting DHCPREQUEST packet: len = 342
> > data abort
> > pc : [<8ffac476>] lr : [<8ffabf23>]
> > reloc pc : [<80157476>] lr : [<80156f23>]
> > sp : 8df255b0 ip : 00000005 fp : 8ffeed30
> >
> >
> > I don't know enough about the networking system to know what to do
> > next. I haven't yet been able to reproduce my single successful dhcp
> > connection
>
> Here is more debug info:
>
>
> AM3517_EVM # dhcp
> Trying ethernet at 5c000000
> BOOTP broadcast 1
> net_send_packet(net_tx_packet, pktlen)
> Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up
> Populate the TX descriptor
> flush_dcache_range
> Send the packet
> /* Wait for packet to complete or link down
> ret_status = 342
> eth_get_ops(current)->send returned with 342
> DHCPHandler: got packet: (src=67, dst=68, len=300) state: 3
> Filtering pkt = 0
> DHCPHandler: got DHCP packet: (src=67, dst=68, len=300) state: 3
> DHCP: state=SELECTING bp_file: ""
> TRANSITIONING TO REQUESTING STATE
> dhcp_send_request_packet: Sending DHCPREQUEST
> Transmitting DHCPREQUEST packet: len = 342
> Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up
> Populate the TX descriptor
> flush_dcache_range
> Send the packet
> /* Wait for packet to complete or link down
> ret_status = 342
> eth_get_ops(current)->send returned with 342
> dhcp_send_request_packet(bp) completed
> return
> data abort
>
>
>
> >
> > adam
> >
> >
> > > adam
> > > > >
> > > > > Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> > > > > ---
> > > > > arch/arm/mach-davinci/cpu.c | 13 -----
> > > > > arch/arm/mach-omap2/omap3/emac.c | 3 +-
> > > > > board/davinci/da8xxevm/da850evm.c | 6 --
> > > > > board/davinci/da8xxevm/omapl138_lcdk.c | 14 -----
> > > > > board/logicpd/am3517evm/am3517evm.c | 1 -
> > > > > board/ti/ti816x/evm.c | 3 +-
> > > > > configs/am3517_evm_defconfig | 1 +
> > > > > configs/da850evm_defconfig | 1 +
> > > > > configs/da850evm_direct_nor_defconfig | 1 +
> > > > > configs/da850evm_nand_defconfig | 1 +
> > > > > configs/omapl138_lcdk_defconfig | 1 +
> > > > > configs/ti816x_evm_defconfig | 1 +
> > > > > drivers/net/ti/davinci_emac.c | 77 ++++++++++++++------------
> > > > > include/netdev.h | 1 -
> > > > > 14 files changed, 51 insertions(+), 73 deletions(-)
> > > > >
> > > > > diff --git a/arch/arm/mach-davinci/cpu.c b/arch/arm/mach-davinci/cpu.c
> > > > > index f97ad3fc74..9fd6564d04 100644
> > > > > --- a/arch/arm/mach-davinci/cpu.c
> > > > > +++ b/arch/arm/mach-davinci/cpu.c
> > > > > @@ -5,7 +5,6 @@
> > > > > */
> > > > >
> > > > > #include <common.h>
> > > > > -#include <netdev.h>
> > > > > #include <asm/arch/hardware.h>
> > > > > #include <asm/io.h>
> > > > >
> > > > > @@ -90,15 +89,3 @@ int set_cpu_clk_info(void)
> > > > > gd->bd->bi_dsp_freq = 0;
> > > > > return 0;
> > > > > }
> > > > > -
> > > > > -/*
> > > > > - * Initializes on-chip ethernet controllers.
> > > > > - * to override, implement board_eth_init()
> > > > > - */
> > > > > -int cpu_eth_init(bd_t *bis)
> > > > > -{
> > > > > -#if defined(CONFIG_DRIVER_TI_EMAC)
> > > > > - davinci_emac_initialize();
> > > > > -#endif
> > > > > - return 0;
> > > > > -}
> > > > > diff --git a/arch/arm/mach-omap2/omap3/emac.c b/arch/arm/mach-omap2/omap3/emac.c
> > > > > index c79e870183..fb0c9188f5 100644
> > > > > --- a/arch/arm/mach-omap2/omap3/emac.c
> > > > > +++ b/arch/arm/mach-omap2/omap3/emac.c
> > > > > @@ -7,7 +7,6 @@
> > > > > */
> > > > >
> > > > > #include <common.h>
> > > > > -#include <netdev.h>
> > > > > #include <asm/io.h>
> > > > > #include <asm/arch/am35x_def.h>
> > > > >
> > > > > @@ -24,5 +23,5 @@ int cpu_eth_init(bd_t *bis)
> > > > > reset &= ~CPGMACSS_SW_RST;
> > > > > writel(reset, &am35x_scm_general_regs->ip_sw_reset);
> > > > >
> > > > > - return davinci_emac_initialize();
> > > > > + return 0;
> > > > > }
> > > > > diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
> > > > > index 1bc26828bf..d090c00466 100644
> > > > > --- a/board/davinci/da8xxevm/da850evm.c
> > > > > +++ b/board/davinci/da8xxevm/da850evm.c
> > > > > @@ -13,7 +13,6 @@
> > > > > #include <environment.h>
> > > > > #include <i2c.h>
> > > > > #include <net.h>
> > > > > -#include <netdev.h>
> > > > > #include <spi.h>
> > > > > #include <spi_flash.h>
> > > > > #include <asm/arch/hardware.h>
> > > > > @@ -472,11 +471,6 @@ int board_eth_init(bd_t *bis)
> > > > > if (rmii_hw_init())
> > > > > printf("RMII hardware init failed!!!\n");
> > > > > #endif
> > > > > - if (!davinci_emac_initialize()) {
> > > > > - printf("Error: Ethernet init failed!\n");
> > > > > - return -1;
> > > > > - }
> > > > > -
> > > > > return 0;
> > > > > }
> > > > > #endif /* CONFIG_DRIVER_TI_EMAC */
> > > > > diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
> > > > > index 2c2f885d43..ef9656add8 100644
> > > > > --- a/board/davinci/da8xxevm/omapl138_lcdk.c
> > > > > +++ b/board/davinci/da8xxevm/omapl138_lcdk.c
> > > > > @@ -11,7 +11,6 @@
> > > > > #include <common.h>
> > > > > #include <i2c.h>
> > > > > #include <net.h>
> > > > > -#include <netdev.h>
> > > > > #include <spi.h>
> > > > > #include <spi_flash.h>
> > > > > #include <asm/arch/hardware.h>
> > > > > @@ -229,19 +228,6 @@ int board_init(void)
> > > > >
> > > > > #ifdef CONFIG_DRIVER_TI_EMAC
> > > > >
> > > > > -/*
> > > > > - * Initializes on-board ethernet controllers.
> > > > > - */
> > > > > -int board_eth_init(bd_t *bis)
> > > > > -{
> > > > > - if (!davinci_emac_initialize()) {
> > > > > - printf("Error: Ethernet init failed!\n");
> > > > > - return -1;
> > > > > - }
> > > > > -
> > > > > - return 0;
> > > > > -}
> > > > > -
> > > > > #endif /* CONFIG_DRIVER_TI_EMAC */
> > > > >
> > > > > #define CFG_MAC_ADDR_SPI_BUS 0
> > > > > diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
> > > > > index 10031a4801..bfd4e78274 100644
> > > > > --- a/board/logicpd/am3517evm/am3517evm.c
> > > > > +++ b/board/logicpd/am3517evm/am3517evm.c
> > > > > @@ -28,7 +28,6 @@
> > > > > #include <linux/usb/gadget.h>
> > > > > #include <linux/usb/musb.h>
> > > > > #include <i2c.h>
> > > > > -#include <netdev.h>
> > > > > #include "am3517evm.h"
> > > > >
> > > > > DECLARE_GLOBAL_DATA_PTR;
> > > > > diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
> > > > > index 07a084bab8..240df8cbe1 100644
> > > > > --- a/board/ti/ti816x/evm.c
> > > > > +++ b/board/ti/ti816x/evm.c
> > > > > @@ -9,7 +9,6 @@
> > > > > #include <common.h>
> > > > > #include <environment.h>
> > > > > #include <spl.h>
> > > > > -#include <netdev.h>
> > > > > #include <asm/cache.h>
> > > > > #include <asm/io.h>
> > > > > #include <asm/arch/clock.h>
> > > > > @@ -56,7 +55,7 @@ int board_eth_init(bd_t *bis)
> > > > > printf("Unable to read MAC address. Set <ethaddr>\n");
> > > > > }
> > > > >
> > > > > - return davinci_emac_initialize();
> > > > > + return 0;
> > > > > }
> > > > >
> > > > > #ifdef CONFIG_SPL_BUILD
> > > > > diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
> > > > > index b9f59f3291..5cb76322df 100644
> > > > > --- a/configs/am3517_evm_defconfig
> > > > > +++ b/configs/am3517_evm_defconfig
> > > > > @@ -44,6 +44,7 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> > > > > CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
> > > > > CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
> > > > > CONFIG_SPL_NAND_SIMPLE=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_MII=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_PINCTRL=y
> > > > > diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
> > > > > index 8c16d5c4f5..ca304ed78a 100644
> > > > > --- a/configs/da850evm_defconfig
> > > > > +++ b/configs/da850evm_defconfig
> > > > > @@ -60,6 +60,7 @@ CONFIG_SF_DEFAULT_SPEED=30000000
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > CONFIG_SPI_FLASH_MTD=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_MII=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_PINCTRL=y
> > > > > diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig
> > > > > index 166e77b8e3..9b1da07384 100644
> > > > > --- a/configs/da850evm_direct_nor_defconfig
> > > > > +++ b/configs/da850evm_direct_nor_defconfig
> > > > > @@ -50,6 +50,7 @@ CONFIG_DM_SPI_FLASH=y
> > > > > CONFIG_SPI_FLASH=y
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_MII=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_PINCTRL=y
> > > > > diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
> > > > > index b8eac0e659..eaf5d73dd8 100644
> > > > > --- a/configs/da850evm_nand_defconfig
> > > > > +++ b/configs/da850evm_nand_defconfig
> > > > > @@ -60,6 +60,7 @@ CONFIG_SPI_FLASH=y
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > CONFIG_SPI_FLASH_MTD=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_PINCTRL=y
> > > > > CONFIG_PINCTRL_SINGLE=y
> > > > > CONFIG_DM_SERIAL=y
> > > > > diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
> > > > > index e43141844a..f93a06083e 100644
> > > > > --- a/configs/omapl138_lcdk_defconfig
> > > > > +++ b/configs/omapl138_lcdk_defconfig
> > > > > @@ -50,6 +50,7 @@ CONFIG_SPI_FLASH=y
> > > > > CONFIG_SF_DEFAULT_SPEED=30000000
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_MII=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_DM_SERIAL=y
> > > > > diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig
> > > > > index bf877f596b..b233ab8cc9 100644
> > > > > --- a/configs/ti816x_evm_defconfig
> > > > > +++ b/configs/ti816x_evm_defconfig
> > > > > @@ -45,6 +45,7 @@ CONFIG_SYS_I2C_OMAP24XX=y
> > > > > CONFIG_MMC_OMAP_HS=y
> > > > > CONFIG_NAND=y
> > > > > CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_MII=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_SYS_NS16550=y
> > > > > diff --git a/drivers/net/ti/davinci_emac.c b/drivers/net/ti/davinci_emac.c
> > > > > index 9d53984973..4b0a98a4aa 100644
> > > > > --- a/drivers/net/ti/davinci_emac.c
> > > > > +++ b/drivers/net/ti/davinci_emac.c
> > > > > @@ -26,7 +26,6 @@
> > > > > #include <net.h>
> > > > > #include <miiphy.h>
> > > > > #include <malloc.h>
> > > > > -#include <netdev.h>
> > > > > #include <linux/compiler.h>
> > > > > #include <asm/arch/emac_defs.h>
> > > > > #include <asm/io.h>
> > > > > @@ -107,8 +106,9 @@ static u_int8_t num_phy;
> > > > >
> > > > > phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
> > > > >
> > > > > -static int davinci_eth_set_mac_addr(struct eth_device *dev)
> > > > > +static int davinci_emac_write_hwaddr(struct udevice *dev)
> > > > > {
> > > > > + struct eth_pdata *pdata = dev_get_platdata(dev);
> > > > > unsigned long mac_hi;
> > > > > unsigned long mac_lo;
> > > > >
> > > > > @@ -118,12 +118,12 @@ static int davinci_eth_set_mac_addr(struct eth_device *dev)
> > > > > * Using channel 0 only - other channels are disabled
> > > > > * */
> > > > > writel(0, &adap_emac->MACINDEX);
> > > > > - mac_hi = (dev->enetaddr[3] << 24) |
> > > > > - (dev->enetaddr[2] << 16) |
> > > > > - (dev->enetaddr[1] << 8) |
> > > > > - (dev->enetaddr[0]);
> > > > > - mac_lo = (dev->enetaddr[5] << 8) |
> > > > > - (dev->enetaddr[4]);
> > > > > + mac_hi = (pdata->enetaddr[3] << 24) |
> > > > > + (pdata->enetaddr[2] << 16) |
> > > > > + (pdata->enetaddr[1] << 8) |
> > > > > + (pdata->enetaddr[0]);
> > > > > + mac_lo = (pdata->enetaddr[5] << 8) |
> > > > > + (pdata->enetaddr[4]);
> > > > >
> > > > > writel(mac_hi, &adap_emac->MACADDRHI);
> > > > > #if defined(DAVINCI_EMAC_VERSION2)
> > > > > @@ -411,7 +411,7 @@ static void __attribute__((unused)) davinci_eth_gigabit_enable(int phy_addr)
> > > > > }
> > > > >
> > > > > /* Eth device open */
> > > > > -static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
> > > > > +static int davinci_emac_start(struct udevice *dev)
> > > > > {
> > > > > dv_reg_p addr;
> > > > > u_int32_t clkdiv, cnt, mac_control;
> > > > > @@ -447,7 +447,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
> > > > > writel(1, &adap_emac->TXCONTROL);
> > > > > writel(1, &adap_emac->RXCONTROL);
> > > > >
> > > > > - davinci_eth_set_mac_addr(dev);
> > > > > + davinci_emac_write_hwaddr(dev);
> > > > >
> > > > > /* Set DMA 8 TX / 8 RX Head pointers to 0 */
> > > > > addr = &adap_emac->TX0HDP;
> > > > > @@ -588,7 +588,7 @@ static void davinci_eth_ch_teardown(int ch)
> > > > > }
> > > > >
> > > > > /* Eth device close */
> > > > > -static void davinci_eth_close(struct eth_device *dev)
> > > > > +static void davinci_emac_stop(struct udevice *dev)
> > > > > {
> > > > > debug_emac("+ emac_close\n");
> > > > >
> > > > > @@ -619,8 +619,8 @@ static int tx_send_loop = 0;
> > > > > * This function sends a single packet on the network and returns
> > > > > * positive number (number of bytes transmitted) or negative for error
> > > > > */
> > > > > -static int davinci_eth_send_packet (struct eth_device *dev,
> > > > > - void *packet, int length)
> > > > > +static int davinci_emac_send(struct udevice *dev,
> > > > > + void *packet, int length)
> > > > > {
> > > > > int ret_status = -1;
> > > > > int index;
> > > > > @@ -672,7 +672,7 @@ static int davinci_eth_send_packet (struct eth_device *dev,
> > > > > /*
> > > > > * This function handles receipt of a packet from the network
> > > > > */
> > > > > -static int davinci_eth_rcv_packet (struct eth_device *dev)
> > > > > +static int davinci_emac_recv(struct udevice *dev, int flags, uchar **packetp)
> > > > > {
> > > > > volatile emac_desc *rx_curr_desc;
> > > > > volatile emac_desc *curr_desc;
> > > > > @@ -742,6 +742,9 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
> > > > > }
> > > > > return (ret);
> > > > > }
> > > > > +
> > > > > + *packetp = rx_curr_desc->buffer;
> > > > > +
> > > > > return (0);
> > > > > }
> > > > >
> > > > > @@ -750,30 +753,12 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
> > > > > * EMAC modules power or pin multiplexors, that is done by board_init()
> > > > > * much earlier in bootup process. Returns 1 on success, 0 otherwise.
> > > > > */
> > > > > -int davinci_emac_initialize(void)
> > > > > +static int davinci_emac_probe(struct udevice *dev)
> > > > > {
> > > > > u_int32_t phy_id;
> > > > > u_int16_t tmp;
> > > > > int i;
> > > > > int ret;
> > > > > - struct eth_device *dev;
> > > > > -
> > > > > - dev = malloc(sizeof *dev);
> > > > > -
> > > > > - if (dev == NULL)
> > > > > - return -1;
> > > > > -
> > > > > - memset(dev, 0, sizeof *dev);
> > > > > - strcpy(dev->name, "DaVinci-EMAC");
> > > > > -
> > > > > - dev->iobase = 0;
> > > > > - dev->init = davinci_eth_open;
> > > > > - dev->halt = davinci_eth_close;
> > > > > - dev->send = davinci_eth_send_packet;
> > > > > - dev->recv = davinci_eth_rcv_packet;
> > > > > - dev->write_hwaddr = davinci_eth_set_mac_addr;
> > > > > -
> > > > > - eth_register(dev);
> > > > >
> > > > > davinci_eth_mdio_enable();
> > > > >
> > > > > @@ -854,5 +839,29 @@ int davinci_emac_initialize(void)
> > > > > phy[i].auto_negotiate(i);
> > > > > }
> > > > > #endif
> > > > > - return(1);
> > > > > + return 0;
> > > > > }
> > > > > +
> > > > > +static const struct eth_ops davinci_emac_ops = {
> > > > > + .start = davinci_emac_start,
> > > > > + .send = davinci_emac_send,
> > > > > + .recv = davinci_emac_recv,
> > > > > + .stop = davinci_emac_stop,
> > > > > + .write_hwaddr = davinci_emac_write_hwaddr,
> > > > > +};
> > > > > +
> > > > > +static const struct udevice_id davinci_emac_ids[] = {
> > > > > + { .compatible = "ti,davinci-dm6467-emac" },
> > > > > + { .compatible = "ti,am3517-emac", },
> > > > > + { .compatible = "ti,dm816-emac", },
> > > > > + { }
> > > > > +};
> > > > > +
> > > > > +U_BOOT_DRIVER(davinci_emac) = {
> > > > > + .name = "davinci_emac",
> > > > > + .id = UCLASS_ETH,
> > > > > + .of_match = davinci_emac_ids,
> > > > > + .probe = davinci_emac_probe,
> > > > > + .ops = &davinci_emac_ops,
> > > > > + .platdata_auto_alloc_size = sizeof(struct eth_pdata),
> > > > > +};
> > > > > diff --git a/include/netdev.h b/include/netdev.h
> > > > > index 0a1a3a2d8d..a40c4adaad 100644
> > > > > --- a/include/netdev.h
> > > > > +++ b/include/netdev.h
> > > > > @@ -30,7 +30,6 @@ int bcm_sf2_eth_register(bd_t *bis, u8 dev_num);
> > > > > int bfin_EMAC_initialize(bd_t *bis);
> > > > > int calxedaxgmac_initialize(u32 id, ulong base_addr);
> > > > > int cs8900_initialize(u8 dev_num, int base_addr);
> > > > > -int davinci_emac_initialize(void);
> > > > > int dc21x4x_initialize(bd_t *bis);
> > > > > int designware_initialize(ulong base_addr, u32 interface);
> > > > > int dm9000_initialize(bd_t *bis);
> > > > > --
> > > > > 2.21.0
> > > > >
More information about the U-Boot
mailing list