[U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code
Y.b. Lu
yangbo.lu at nxp.com
Mon Jun 3 04:28:24 UTC 2019
Hi,
> -----Original Message-----
> From: Angelo Dureghello <angelo at sysam.it>
> Sent: 2019年5月31日 15:15
> To: Y.b. Lu <yangbo.lu at nxp.com>
> Cc: u-boot at lists.denx.de
> Subject: Re: [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code
>
> Hi Lu,
>
> On Fri, May 31, 2019 at 06:12:12AM +0000, Y.b. Lu wrote:
> > Hi Angelo,
> >
> > > -----Original Message-----
> > > From: Angelo Dureghello <angelo at sysam.it>
> > > Sent: 2019年5月31日 2:23
> > > To: Y.b. Lu <yangbo.lu at nxp.com>
> > > Cc: u-boot at lists.denx.de; Stefano Babic <sbabic at denx.de>; Fabio
> > > Estevam <festevam at gmail.com>; dl-uboot-imx <uboot-imx at nxp.com>;
> > > Albert Aribaud <albert.u.boot at aribaud.net>; Eddy Petrișor
> > > <eddy.petrisor at gmail.com>; Akshay Bhat <akshaybhat at timesys.com>;
> Ken
> > > Lin <Ken.Lin at advantech.com.tw>; Heiko Schocher <hs at denx.de>;
> > > Christian Gmeiner <christian.gmeiner at gmail.com>; Stefan Roese
> > > <sr at denx.de>; Patrick Bruenn <p.bruenn at beckhoff.com>; Troy Kisky
> > > <troy.kisky at boundarydevices.com>; Uri Mashiach
> > > <uri.mashiach at compulab.co.il>; Nikita Kiryanov
> > > <nikita at compulab.co.il>; Otavio Salvador <otavio at ossystems.com.br>;
> > > Andreas Geisreiter <ageisreiter at dh-electronics.de>; Ludwig Zenz
> > > <lzenz at dh-electronics.de>; Eric Bénard <eric at eukrea.com>; Peng Fan
> > > <peng.fan at nxp.com>; Jason Liu <jason.hui.liu at nxp.com>; Ye Li
> > > <ye.li at nxp.com>; Adrian Alonso <adrian.alonso at nxp.com>; Alison Wang
> > > <alison.wang at nxp.com>; tharvey at gateworks.com; Ian Ray
> > > <ian.ray at ge.com>; Marcin Niestroj <m.niestroj at grinn-global.com>;
> > > Andrej Rosano <andrej at inversepath.com>; Marek Vasut
> <marex at denx.de>;
> > > Lukasz Majewski <lukma at denx.de>; Adam Ford <aford173 at gmail.com>;
> > > Olaf Mandel <o.mandel at menlosystems.com>; Martyn Welch
> > > <martyn.welch at collabora.com>; Ingo Schroeck
> <open-source at samtec.de>;
> > > Boris Brezillon <boris.brezillon at free-electrons.com>; Soeren Moch
> > > <smoch at web.de>; Richard Hu <richard.hu at technexion.com>; Vanessa
> > > Maegima <vanessa.maegima at nxp.com>; Max Krummenacher
> > > <max.krummenacher at toradex.com>; Stefan Agner
> > > <stefan.agner at toradex.com>; Markus Niebel
> > > <Markus.Niebel at tq-group.com>; Breno Matheus Lima
> > > <breno.lima at nxp.com>; Francesco Montefoschi
> > > <francesco.montefoschi at udoo.org>; Parthiban Nallathambi
> > > <parthitce at gmail.com>; Albert ARIBAUD <albert.aribaud at 3adev.fr>;
> > > Jagan Teki <jagan at amarulasolutions.com>; Raffaele RECALCATI
> > > <raffaele.recalcati at bticino.it>; Simone CIANNI
> > > <simone.cianni at bticino.it>; Bhaskar Upadhaya
> > > <bhaskar.upadhaya at nxp.com>; Vinitha V Pillai
> > > <vinitha.pillai at nxp.com>; Prabhakar Kushwaha
> > > <prabhakar.kushwaha at nxp.com>; Rajesh Bhagat
> <rajesh.bhagat at nxp.com>;
> > > Antti Mäentausta <antti.maentausta at ge.com>; Sébastien Szymanski
> > > <sebastien.szymanski at armadeus.com>; Lucile Quirion
> > > <lucile.quirion at savoirfairelinux.com>; Alexey Brodkin
> > > <abrodkin at synopsys.com>; Trevor Woerner <trevor at toganlabs.com>;
> > > Anatolij Gustschin <agust at denx.de>; Denis Zalevskiy
> > > <denis.zalevskiy at ge.com>; Fabien Lahoudere
> > > <fabien.lahoudere at collabora.com>; Joe Hershberger
> > > <joe.hershberger at ni.com>; Simon Goldschmidt
> > > <simon.k.r.goldschmidt at gmail.com>; James Byrne
> > > <james.byrne at origamienergy.com>
> > > Subject: Re: [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code
> > >
> > > Hi Lu,
> > >
> > > On Tue, May 21, 2019 at 08:53:04AM +0000, Y.b. Lu wrote:
> > > > Dropped useless code for i.MX eSDHC driver.
> > > >
> > > > Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
> > > > ---
> > > > Changes for v2:
> > > > - Added this patch.
> > > > Changes for v3:
> > > > - None.
> > > > ---
> > > > drivers/mmc/fsl_esdhc_imx.c | 96 ++-----------------------------------
> > > > include/fsl_esdhc_imx.h | 4 --
> > > > 2 files changed, 4 insertions(+), 96 deletions(-)
> > > >
> > > > diff --git a/drivers/mmc/fsl_esdhc_imx.c
> > > > b/drivers/mmc/fsl_esdhc_imx.c index faf133390f..1c02e0eef1 100644
> > > > --- a/drivers/mmc/fsl_esdhc_imx.c
> > > > +++ b/drivers/mmc/fsl_esdhc_imx.c
> > > > @@ -259,8 +259,7 @@ static int esdhc_setup_data(struct
> > > > fsl_esdhc_priv *priv, struct mmc *mmc, {
> > > > int timeout;
> > > > struct fsl_esdhc *regs = priv->esdhc_regs; -#if
> > > > defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
> > > > - defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
> > > > +#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) ||
> > > > +defined(CONFIG_IMX8M)
> > > > dma_addr_t addr;
> > > > #endif
> > > > uint wml_value;
> > > > @@ -273,8 +272,7 @@ static int esdhc_setup_data(struct
> > > > fsl_esdhc_priv *priv, struct mmc *mmc,
> > > >
> > > > esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK,
> wml_value);
> > > > #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO -#if
> > > > defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
> > > > - defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
> > > > +#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) ||
> > > > +defined(CONFIG_IMX8M)
> > > > addr = virt_to_phys((void *)(data->dest));
> > > > if (upper_32_bits(addr))
> > > > printf("Error found for upper 32 bits\n"); @@ -310,8
> +308,7
> > > @@
> > > > static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc
> *mmc,
> > > > esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK,
> > > > wml_value << 16);
> > > > #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO -#if
> > > > defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
> > > > - defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
> > > > +#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) ||
> > > > +defined(CONFIG_IMX8M)
> > > > addr = virt_to_phys((void *)(data->src));
> > > > if (upper_32_bits(addr))
> > > > printf("Error found for upper 32 bits\n"); @@ -376,8
> +373,7
> > > @@
> > > > static void check_and_invalidate_dcache_range
> > > > unsigned end = 0;
> > > > unsigned size = roundup(ARCH_DMA_MINALIGN,
> > > > data->blocks*data->blocksize); -#if
> > > > defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
> > > > - defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
> > > > +#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) ||
> > > > +defined(CONFIG_IMX8M)
> > > > dma_addr_t addr;
> > > >
> > > > addr = virt_to_phys((void *)(data->dest)); @@ -392,25 +388,6 @@
> > > > static void check_and_invalidate_dcache_range
> > > > invalidate_dcache_range(start, end); }
> > > >
> > > > -#ifdef CONFIG_MCF5441x
> > > > -/*
> > > > - * Swaps 32-bit words to little-endian byte order.
> > > > - */
> > > > -static inline void sd_swap_dma_buff(struct mmc_data *data) -{
> > > > - int i, size = data->blocksize >> 2;
> > > > - u32 *buffer = (u32 *)data->dest;
> > > > - u32 sw;
> > > > -
> > > > - while (data->blocks--) {
> > > > - for (i = 0; i < size; i++) {
> > > > - sw = __sw32(*buffer);
> > > > - *buffer++ = sw;
> > > > - }
> > > > - }
> > > > -}
> > > > -#endif
> > > > -
> > >
> > > Doing so you remove the ColdFire family code (mcf5441x) i just added
> recently.
> > > Since they are big-endian, and dma hw has no options to swap, swap
> > > is needed.
> > >
> > > Please don't remove it.
> >
> > [Y.b. Lu] I didn’t remove mcf5441x support. The code is still in fsl_esdhc.c,
> but dropped in fsl_esdhc_imx.c.
> > I'm surprised there was other platforms using eSDHC besides QorIQ and i.MX,
> because eSDHC is an IP of Freescale/NXP.
> > Since I didn't know whether mcf5441x eSDHC is same with QorIQ or i.MX,
> > I just left it in fsl_esdhc.c So, which driver should apply to mcf5441x eSDHC?
> >
> > Thanks.
> > >
>
> Many thanks for clarifications, looks like i lost some detail of the patch, sorry.
> Well, Freescale did some HW modules that has re-used built-in into i.MX,
> ColdFire and also sometimes ppc families. They are nearly the same (same
> register set) but with some minimal differences on some bit field.
> Those are i2c, dspi, edma, and as for this case, the eSDHC. You can apply
> ColdFire code for the i.MX driver, should be fine. Then i should be able to test
> that it works properly. Just see the CONFIG_MCF5441x for the needed ColdFire
> code. Thanks for the cleanup.
>
[Y.b. Lu] I have sent out v5 patch-set with changes applying esdhc imx driver to mcf5441x.
Please help to verify your platforms.
Travis-CI link for build test:
https://travis-ci.org/yangbolu1991/u-boot-test/builds/540574527
Thanks.
> > > > /*
> > > > * Sends a command out on the bus. Takes the mmc pointer,
> > > > * a command pointer, and an optional data pointer.
> > > > @@ -575,9 +552,6 @@ static int esdhc_send_cmd_common(struct
> > > fsl_esdhc_priv *priv, struct mmc *mmc,
> > > > */
> > > > if (data->flags & MMC_DATA_READ) {
> > > > check_and_invalidate_dcache_range(cmd, data); -#ifdef
> > > > CONFIG_MCF5441x
> > > > - sd_swap_dma_buff(data);
> > >
> > > Same here.
> > >
> > > > -#endif
> > > > }
> > > > #endif
> > > > }
> > > > @@ -1073,12 +1047,8 @@ static int esdhc_init_common(struct
> > > fsl_esdhc_priv *priv, struct mmc *mmc)
> > > > /* Disable the BRR and BWR bits in IRQSTAT */
> > > > esdhc_clrbits32(®s->irqstaten, IRQSTATEN_BRR |
> > > > IRQSTATEN_BWR);
> > > >
> > > > -#ifdef CONFIG_MCF5441x
> > > > - esdhc_write32(®s->proctl, PROCTL_INIT | PROCTL_D3CD);
> > > > -#else
> > > > /* Put the PROCTL reg back to the default */
> > > > esdhc_write32(®s->proctl, PROCTL_INIT); -#endif
> > > >
> > > > /* Set timout to the maximum value */
> > > > esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, 14 <<
> > > > 16);
> > > @@
> > > > -1186,11 +1156,6 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv
> *priv,
> > > > if (ret)
> > > > return ret;
> > > >
> > > > -#ifdef CONFIG_MCF5441x
> > > > - /* ColdFire, using SDHC_DATA[3] for card detection */
> > > > - esdhc_write32(®s->proctl, PROCTL_INIT | PROCTL_D3CD);
> > > > -#endif
> > > > -
> > > > #ifndef CONFIG_FSL_USDHC
> > > > esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN
> > > > | SYSCTL_IPGEN | SYSCTL_CKEN); @@ -1215,15
> +1180,6 @@ static
> > > > int fsl_esdhc_init(struct fsl_esdhc_priv
> > > *priv,
> > > > voltage_caps = 0;
> > > > caps = esdhc_read32(®s->hostcapblt);
> > > >
> > > > -#ifdef CONFIG_MCF5441x
> > > > - /*
> > > > - * MCF5441x RM declares in more points that sdhc clock speed
> must
> > > > - * never exceed 25 Mhz. From this, the HS bit needs to be disabled
> > > > - * from host capabilities.
> > > > - */
> > > > - caps &= ~ESDHC_HOSTCAPBLT_HSS;
> > > > -#endif
> > >
> > > Same here.
> > >
> > >
> > > > -
> > > > #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
> > > > caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
> > > > ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30);
> @@
> > > -1375,45
> > > > +1331,6 @@ int fsl_esdhc_mmc_init(bd_t *bis) } #endif
> > > >
> > > > -#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT -void
> > > > mmc_adapter_card_type_ident(void) -{
> > > > - u8 card_id;
> > > > - u8 value;
> > > > -
> > > > - card_id = QIXIS_READ(present) & QIXIS_SDID_MASK;
> > > > - gd->arch.sdhc_adapter = card_id;
> > > > -
> > > > - switch (card_id) {
> > > > - case QIXIS_ESDHC_ADAPTER_TYPE_EMMC45:
> > > > - value = QIXIS_READ(brdcfg[5]);
> > > > - value |= (QIXIS_DAT4 | QIXIS_DAT5_6_7);
> > > > - QIXIS_WRITE(brdcfg[5], value);
> > > > - break;
> > > > - case QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY:
> > > > - value = QIXIS_READ(pwr_ctl[1]);
> > > > - value |= QIXIS_EVDD_BY_SDHC_VS;
> > > > - QIXIS_WRITE(pwr_ctl[1], value);
> > > > - break;
> > > > - case QIXIS_ESDHC_ADAPTER_TYPE_EMMC44:
> > > > - value = QIXIS_READ(brdcfg[5]);
> > > > - value |= (QIXIS_SDCLKIN | QIXIS_SDCLKOUT);
> > > > - QIXIS_WRITE(brdcfg[5], value);
> > > > - break;
> > > > - case QIXIS_ESDHC_ADAPTER_TYPE_RSV:
> > > > - break;
> > > > - case QIXIS_ESDHC_ADAPTER_TYPE_MMC:
> > > > - break;
> > > > - case QIXIS_ESDHC_ADAPTER_TYPE_SD:
> > > > - break;
> > > > - case QIXIS_ESDHC_NO_ADAPTER:
> > > > - break;
> > > > - default:
> > > > - break;
> > > > - }
> > > > -}
> > > > -#endif
> > > > -
> > > > #ifdef CONFIG_OF_LIBFDT
> > > > __weak int esdhc_status_fixup(void *blob, const char *compat) {
> > > > @@
> > > > -1441,10 +1358,6 @@ void fdt_fixup_esdhc(void *blob, bd_t *bd)
> > > > do_fixup_by_compat_u32(blob, compat, "clock-frequency",
> > > > gd->arch.sdhc_clk, 1);
> > > > #endif
> > > > -#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
> > > > - do_fixup_by_compat_u32(blob, compat, "adapter-type",
> > > > - (u32)(gd->arch.sdhc_adapter), 1);
> > > > -#endif
> > > > }
> > > > #endif
> > > >
> > > > @@ -1654,7 +1567,6 @@ static const struct udevice_id fsl_esdhc_ids[] =
> {
> > > > { .compatible = "fsl,imx6q-usdhc", },
> > > > { .compatible = "fsl,imx7d-usdhc", .data =
> (ulong)&usdhc_imx7d_data,},
> > > > { .compatible = "fsl,imx7ulp-usdhc", },
> > > > - { .compatible = "fsl,esdhc", },
> > > > { /* sentinel */ }
> > > > };
> > > >
> > > > diff --git a/include/fsl_esdhc_imx.h b/include/fsl_esdhc_imx.h
> > > > index
> > > > e05b24e7e8..8abd28ea50 100644
> > > > --- a/include/fsl_esdhc_imx.h
> > > > +++ b/include/fsl_esdhc_imx.h
> > > > @@ -17,10 +17,6 @@
> > > > /* needed for the mmc_cfg definition */ #include <mmc.h>
> > > >
> > > > -#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT -#include
> > > > "../board/freescale/common/qixis.h"
> > > > -#endif
> > > > -
> > > > /* FSL eSDHC-specific constants */
> > > > #define SYSCTL 0x0002e02c
> > > > #define SYSCTL_INITA 0x08000000
> > > > --
> > > > 2.17.1
> > > >
>
> Regards,
> Angelo Dureghello
More information about the U-Boot
mailing list