[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

Schrempf Frieder frieder.schrempf at kontron.de
Mon Jun 3 06:55:50 UTC 2019

Hi Shyam,

On 31.05.19 11:10, Shyam Saini wrote:
> Hi Schrempf,
> As of now imx usb loader does not process FIT images.
> Have you added some patch or support on imx usb loader side ?

No, I'm using imx_usb_loader only to load the FIT image to DRAM in SPL 
via SDP. The SPL is then processing the FIT image and loading U-Boot 
proper from the image.


> Thanks and regards,
> Shyam
> On Mon, May 27, 2019 at 12:10 PM Schrempf Frieder
> <frieder.schrempf at kontron.de> wrote:
>> Hi Fabio,
>> On 23.05.19 19:45, Fabio Estevam wrote:
>>> Hi Schrempf,
>>> On Thu, May 23, 2019 at 2:26 PM Schrempf Frieder
>>> <frieder.schrempf at kontron.de> wrote:
>>>> As luck would have it, I needed to load a FIT via SDP today, so I came
>>>> up with a quick patch (see below). There are probably better ways to do
>>>> this, but it works.
>>> Thanks for your patch!
>>> I would like to give it a try, but it does not apply against U-Boot mainline.
>>> I manually applied it, but failed to build:
>>> cmd/usb_gadget_sdp.c: In function ‘do_sdp’:
>>> cmd/usb_gadget_sdp.c:35:2: error: too few arguments to function ‘sdp_handle’
>>>     sdp_handle(controller_index);
>> Sorry, I just picked the patch from my messy working tree and it's based
>> on 2019.04 and some other changes.
>>> Could you please rebase it against U-Boot mainline and post it like a
>>> formal patch?
>> I need to do some rebasing and cleanup, but I'm definitely planning to
>> send this as a patch for upstream.
>> Thanks,
>> Frieder
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> https://lists.denx.de/listinfo/u-boot

More information about the U-Boot mailing list