[U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board
Shyam Saini
shyam.saini at amarulasolutions.com
Tue Jun 4 08:47:03 UTC 2019
This initial support includes:
Linux v5.2-rc1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini at amarulasolutions.com>
---
.gitlab-ci.yml | 1 +
DEVELOPERS | 2 ++
board/friendlyarm/nanopi-neo4/extlinux.conf | 4 +++
board/friendlyarm/nanopi-neo4/genimage.cfg | 22 ++++++++++++
board/friendlyarm/nanopi-neo4/post-build.sh | 9 +++++
board/friendlyarm/nanopi-neo4/readme.txt | 53 +++++++++++++++++++++++++++
configs/nanopi_neo4_defconfig | 55 +++++++++++++++++++++++++++++
7 files changed, 146 insertions(+)
create mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
create mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
create mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
create mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
create mode 100644 configs/nanopi_neo4_defconfig
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 5ed1b8f4d5..2f41bcf7c6 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -181,6 +181,7 @@ nanopi_m1_defconfig: { extends: .defconfig }
nanopi_m1_plus_defconfig: { extends: .defconfig }
nanopi_m4_defconfig: { extends: .defconfig }
nanopi_neo_defconfig: { extends: .defconfig }
+nanopi_neo4_defconfig: { extends: .defconfig }
nexbox_a95x_defconfig: { extends: .defconfig }
nitrogen6sx_defconfig: { extends: .defconfig }
nitrogen6x_defconfig: { extends: .defconfig }
diff --git a/DEVELOPERS b/DEVELOPERS
index e2ea103d83..55fb022218 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2044,10 +2044,12 @@ F: package/wolfssl/
N: Shyam Saini <shyam.saini at amarulasolutions.com>
F: board/friendlyarm/nanopc-t4/
F: board/friendlyarm/nanopi-m4/
+F: board/friendlyarm/nanopi-neo4/
F: board/olimex/a33_olinuxino/
F: board/orangepi/orangepi-rk3399/
F: configs/nanopc_t4_defconfig
F: configs/nanopi_m4_defconfig
+F: configs/nanopi_neo4_defconfig
F: configs/olimex_a33_olinuxino_defconfig
F: configs/orangepi_rk3399_defconfig
diff --git a/board/friendlyarm/nanopi-neo4/extlinux.conf b/board/friendlyarm/nanopi-neo4/extlinux.conf
new file mode 100644
index 0000000000..91eef67fb9
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/extlinux.conf
@@ -0,0 +1,4 @@
+label NanoPi Neo4 linux
+ kernel /boot/Image
+ devicetree /boot/rk3399-nanopi-neo4.dtb
+ append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
diff --git a/board/friendlyarm/nanopi-neo4/genimage.cfg b/board/friendlyarm/nanopi-neo4/genimage.cfg
new file mode 100644
index 0000000000..b8c1cd5220
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/genimage.cfg
@@ -0,0 +1,22 @@
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot-tpl-spl-dtb {
+ in-partition-table = "no"
+ image = "u-boot-tpl-spl-dtb.img"
+ offset = 32K
+ }
+
+ partition u-boot-dtb {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 8M
+ size = 30M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/friendlyarm/nanopi-neo4/post-build.sh b/board/friendlyarm/nanopi-neo4/post-build.sh
new file mode 100755
index 0000000000..e852ba6adf
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/post-build.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img
+cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopi-neo4/readme.txt b/board/friendlyarm/nanopi-neo4/readme.txt
new file mode 100644
index 0000000000..07e3491459
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/readme.txt
@@ -0,0 +1,53 @@
+Intro
+=====
+
+NanoPi Neo4 is a RK3399 SoC based ARM64 board.
+
+
+Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4
+Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html
+
+Build
+=====
+
+Run NanoPi Neo4 configuration
+
+ $ make nanopi_neo4_defconfig
+
+To build, run make comamnd.
+
+ $ make
+
+Files created in output directory
+=================================
+
+output/images
+
+├── bl31.bin
+├── bl31.elf
+├── Image
+├── rk3399-nanopi-neo4.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+├── u-boot.itb
+├── u-boot-spl-dtb.bin
+├── u-boot-tpl-dtb.bin
+├── u-boot-tpl-dtb.img
+└── u-boot-tpl-spl-dtb.img
+
+Creating bootable SD card:
+=========================
+
+Simply invoke (as root)
+
+ # dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device
+
+Serial console
+--------------
+
+Baudrate for this board is 1500000
diff --git a/configs/nanopi_neo4_defconfig b/configs/nanopi_neo4_defconfig
new file mode 100644
index 0000000000..f75f4367a9
--- /dev/null
+++ b/configs/nanopi_neo4_defconfig
@@ -0,0 +1,55 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72_a53=y
+
+# Linux headers 5.1 series
+BR2_KERNEL_HEADERS_5_1=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="dd2b180c457d35de195707dfa0b57a83b97fb275"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-neo4-rk3399"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl-dtb.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="v5.2-rc1"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-neo4"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_HOSTNAME="NanoPi Neo4"
+BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPi Neo4!"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo4/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo4/post-build.sh"
--
2.11.0
More information about the U-Boot
mailing list